Search:     Advanced search


Using:
Any of the words entered
All of the words entered
Browse by category:





The expression pedal sends inadequate values, however it runs just fine on other MIDI keyboards.

Views: 2367

 

This tip applies to Analog Laboratory 49 & 61 keyboards only:

  1. Power up your keyboard while simultaneously pressing the [Sound] and [Scene] buttons: the keyboard enters in calibration mode;
  2. Activate the pedal for the keyboard to "see" it;
  3. Rotate the [Preset] knob to first set the "Min" field;
  4. Set the pedal to minimum position, then *press* the [Preset] knob to validate the shown minimum value; (NOTE: electrical value only, not MIDI, so this could vary depending on your pedal type)
  5. Rotate the [Preset] knob to now set the "Max" field;
  6. Set the pedal to maximum position, then *press* the [Preset] knob to validate the shown maximum value; (NOTE: electrical value only, not MIDI, so this could vary depending on your pedal type)
  7. Validate the whole by *pressing* the [Category] knob: the keyboard returns in normal play mode;
  8. Activate the pedal: the keyboard screen should show MIDI value "0" at minimum position, "127" at maximum.

Your keyboard is now fully serviceable.

Others in this Category
document My sustain pedal acts reversely; how to invert it?
document Windows refuses to recognize the Player/Factory/Laboratory MIDI keyboard, the driver is not detected.
document The pads on the Laboratory keyboard trigger only notes in Scene mode, not audio loops nor FX.
document Which expression pedal to use with the MIDI keyboard?
document I installed an Expansion pack, and nothing new appears neither in Sound or Scene mode.
Most viewed
 
document How to authorize my virtual instrument?
01 Jan, 1970
document How to transfer the license from one com...
01 Jan, 1970
document Error: "No Soft-eLicenser can be found"
01 Jan, 1970
document My question is not listed here, how can ...
01 Jan, 1970
document The plug-in does not appear in Logic Pro
01 Jan, 1970
 
Recent articles
 
document Spark 2 - Project compatibility
01 Jan, 1970
document Spark 2
01 Jan, 1970
document USB
01 Jan, 1970
document How to power my BeatStep
01 Jan, 1970
document How to (re)calibrate the potentiometer-b...
01 Jan, 1970