Arturia Forums

Controllers => MiniLab => MiniLab Technical Issues => Topic started by: Adrien on August 07, 2013, 10:24:36 am

Title: Known issues answers
Post by: Adrien on August 07, 2013, 10:24:36 am
Hi all

Here are some issue that you encounter often and I want to put the solutions in one common place.

You have trouble connecting the MIDI Control Center to your minilab sometime
You are probably using version 2.0.0.0 of the firmware and should update to version 2.1.0.1, see this paragraph :" Carre Couleur Midi Control Center Update" on this page (http://www.arturia.com/evolution/en/products/MiniLab/resources.html).

In Live you parameter are no moving correcly, and always stay around 50%
That is because the minilab is in relative mode by default. You can

In Live you need about 5 turns to go from 0 to 100% of the knob value using minilab, i.e. you have no acceleration
Then the problem is that Live does not handle acceleration well with the configuration.
This issue is being addressed we will soon provide a better integration script for Live that will solve this issue


Obviously we are sorry if you encountered this issue and hope that this helps.