Arturia Forums

DRUMS => Spark => Spark Users Community => Topic started by: natrixgli on November 28, 2013, 06:48:42 pm

Title: SparkLE Set step velocity from the hardware?
Post by: natrixgli on November 28, 2013, 06:48:42 pm

Hi -

Is there a way to edit the velocity of a step from the hardware?

Thanks

Title: Re: SparkLE Set step velocity from the hardware?
Post by: Kevin on December 02, 2013, 09:17:01 am

Hi,
yes you can do that.
You have to keep pressing the selected step button and press the corresponding pad.
It will update the velocity depending on how hard you press the pad.

Kevin

Title: Re: SparkLE Set step velocity from the hardware?
Post by: airkraut raps on July 25, 2014, 01:17:26 am

This does not work for me.
After releasing the step button the step disappears  ???

I am new to this so maybe i´m missing something, also surprised this is not in the manual.

Title: Re: SparkLE Set step velocity from the hardware?
Post by: airkraut raps on August 01, 2014, 04:42:31 pm

So is this working for anyone?

Title: Re: SparkLE Set step velocity from the hardware?
Post by: Art vandelay on August 10, 2014, 08:34:16 pm

You need to release the step button before releasing the pad. So:

1. Press and hold the step button
2. Press and hold the pad
3. Release the step button
4. Release the pad

Note that the pressure you keep on the pad is still being registered after you release the step button. So whatever the pressure is you've applied just before you release the pad button, is the pressure actually saved for that step.

Title: Re: SparkLE Set step velocity from the hardware?
Post by: airkraut raps on August 11, 2014, 03:13:40 pm

Thanks!
You just made this thing 100% more useful to me.
I was set on using the velocity of the pad press for the velocity value..

Not really a smooth way to adjust it but at least it´s possible.