Arturia Forums
DRUMS => Spark => Spark Technical Issues => Topic started by: ghunter on December 24, 2013, 12:03:59 pm
-
Hello,
I have just picked up sparkle and loving it although I am receiving double notes across all 16 pads at various times. This is happening in stand alone, VST ableton 8 x32 and 9.1 x32.
I have disabled sparkle in the preferences although the double tapping still occurs. Is there something I can try?
regards
Greg
-
Sorry I am currently running 1.7.1 not 1.7
I have tried sparkle on two separate devices and experiencing the issue on both. OS on both devices is windows 7 x64.
build 187 (rev: 7d9a7a7) 32bit
controller version 1.0.0.3
Here is a couple of results from midi-ox which shows the double taps on three different pads:
0002FC87 1 -- 90 3F 1E 1 Eb 4 Note On
0002FC91 1 -- 80 3F 00 1 Eb 4 Note Off
0002FCCB 1 -- 90 3F 64 1 Eb 4 Note On
0002FD05 1 -- 80 3F 00 1 Eb 4 Note Off
0003052D 1 -- 90 3C 40 1 C 4 Note On
0003053C 1 -- 80 3C 00 1 C 4 Note Off
00030574 1 -- 90 3C 05 1 C 4 Note On
0003057F 1 -- 80 3C 00 1 C 4 Note Off
000315F5 1 -- 90 41 22 1 F 4 Note On
000315FF 1 -- 80 41 00 1 F 4 Note Off
00031638 1 -- 90 41 0F 1 F 4 Note On
00031646 1 -- 80 41 00 1 F 4 Note Off
Can you please let me know if this looks like a hardware issue so I can contact the retailer.
many thanks
Greg
-
Hi,
it looks like a hardware issue.
Does it happens on every pads?
-
Hi Kevin,
Thanks for the reply. Yes it seems to be on every pad. I could probably replicate the issue across all pads and capture it in midi-os if it would help?
regards
Greg
-
I think you can go to your retailer and ask for an exchange.
However you might encounter the same behavior. If this is the case, please let me know.
Kevin
-
thanks Kevin, I will speak to my supplier and report back shortly.
greg
-
Hi g hunter ,are you using sparkle in a daw? if so you need to turn off midi through on your daw to stop double notes. when your is in record mode /listen if you have in sparkle pref send midi to pads for some reason it play double notes one for the midi in and one for the vsti .
hope this helps
regards
terrym
-
Hi Terry,
The issue was happening in both the DAW and standalone. I had seen in a similar post about disabling the midi through but unfortunately doing this did not resolve the issue.
My supplier has acknowledged the fault and has sent off for a new sparkle which I am currently waiting on. I will let you know how things are once the new device arrives.
thanks for the reply though!
Greg
-
Hello,
I received my replacement Sparkle yesterday and im glad to report there seems to be no more double taps! Iv only done a little testing but I'm pretty sure its working fine. Also when I had the other device it used to play samples really quietly but I thought it simply needed tweaking in either the sparkle software or ableton. As soon as I started tapping away on the new Sparkle all my samples were playing nice and loud so there must definitely have been an issue with the other device.
Thanks Kevin for you speedy replies and thanks to Arturia for this great little product.
Greg
-
Glad to read this :)