Arturia Forums
Harware Legacy versions => Analog Factory => Topic started by: Pinkkeys on June 24, 2014, 09:31:18 pm
-
Hi Guys,
I've this Analog Experience Factory 32 for couple of years, I've been using it mostly as a Midi controller with Logic/Reason and it was working fine, suddenly it's not sending any midi at all, the machine is turning on (with the red light indicator on buttons) ! I've tried almost everything (reinstalling the 2.5 update, plugging in and out midi while the , checking midi cable)... Someone please point out what else could help me ! Thanks for your support.
-
Hi Pinkkeys,
Can you let me know what's your OS and your DAW version please?
Best,
J.
-
Same problem here. Suddenly my daw stops receiving midi. Sometimes turning off the controller, closing the software, turning on the controller again and then re-running the software works. But this shouldn't happen!
I tried using Midi Control Center but apparently it doesn't work with the firmware version of my keyboard, and the funny thing is that apparently(again) you can only update it (the firmware) with Midi Control Center!
Annoyed!
I'm using Reaper on Win7 Pro 32bit.
Can anyone help me?
-
this is two different problems:
Pinkkeys : Please connect the FActory 32 and try to use it with MIDI OX or MIDIMonitor in order to make sure no MIDI is passing
MAC:
Open the Midi Monitor Application.
==> http://www.snoize.com/MIDIMonitor/
1/ Reproduce the problem on the hardware
2/ go to : File/Save As...
3/ Send us the file
----------------------
WIN:
Please download: http://www.midiox.com/
1/ Open Midi-OX
2/ Click on "Option/Midi Devices..."
3/ In Midi Input, Select your Keyboard Click 'OK'
4/ Open the 'Main outPut Monitor'
5/ Reproduce the problem.
6/ Make sure that a midi signal is well send from your keyboard to the "monitor - Output" window.
7/ Please forward us a screenshot
-------------------------
johnnymarr: there is a few Analog Factory where the Firmware is under 3.0.0.0.
To control if you should use this MIDI control CENTER:
==> https://5.135.188.26/owncloud/public.php?service=files&t=6e0f79038537b0e6acb1607c86211d9e
-
johnnymarr: there is a few Analog Factory where the Firmware is under 3.0.0.0.
To control if you should use this MIDI control CENTER:
==> https://5.135.188.26/owncloud/public.php?service=files&t=6e0f79038537b0e6acb1607c86211d9e
what is the strange net adress?
I was about three months, from the moment he received the analog factory, looking for the firmware, and what I find today?
1. it is just such a page, but the drivers themselves are not there. all
http://arturia.com/aef/resources#resources&Itemid=116&highlight=WyJhbmFsb2ciLCJmYWN0b3J5IiwiYW5hbG9nIGZhY3RvcnkiXQ==
2. I see another link, which ,how i think, leads me to version 3.0, but NO
PEOPLE, ANYBODY have a firmware 3.0, or its fantastic?
-
wtf?
first time in my life , techsupport keep silence,
people have a problem, you must reply!