September 21, 2014, 12:14:09 pm
Welcome, Guest. Please login or register.
Did you miss your activation email
News: Arturia's webmaster is glad to offer you these brand new forums ! Have fun using it and feel free to email any encountered problem at webmaster@arturia.com.

Arturia Forums



Author Topic: Sequence MiniBrute through USB, how to set it up?  (Read 1634 times)

col

  • Apprentice
  • *
  • Posts: 4
  • Karma: 1
Sequence MiniBrute through USB, how to set it up?
« on: January 05, 2013, 03:07:57 pm »
Somebody help a noob out please? How do I set it up so I can use my daw as a midi sequencer through the USB connection?

How I have it set up now:

- Transmit and receive are set to channel 1 on the MB through the Connection software
- The Connection software shows the MB as "connected".

- I have enabled the MIDI device output in Reaper to "MIDIOUT2 (Minibrute) (channel 1)"



- It won't let me enable the Minibrute option from MIDI devices, only the "MIDIOUT2 (Minibrute)" option. If I try to enable the "Minibrute" option, it shows an error message saying the "MIDI output could not be opened".

- I get sound from the MB to Reaper normally, so it's not an audio problem.

Do I need to set something differently from the MB compared to normal use to make this work. This should be possible right? At least it's listed on Arturia.com:

Quote
USB In/Out: Sequence MiniBrute directly from your computerís DAW without needing a MIDI interface.

col

  • Apprentice
  • *
  • Posts: 4
  • Karma: 1
Re: Sequence MiniBrute through USB, how to set it up?
« Reply #1 on: January 05, 2013, 03:24:26 pm »
Already got it working. It wouldn't let me enable midi output because I had the Connection software running.  ;D

beefinator

  • Full Member
  • ***
  • Posts: 135
  • Karma: 0
    • Soundcloud page
Re: Sequence MiniBrute through USB, how to set it up?
« Reply #2 on: January 10, 2013, 01:58:11 am »
yep, some midi drivers (windows, maybe mac, I'm not sure) only allow one program at a time to connect to a midi device.

Bruno@arturia

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 686
  • Karma: 27
Re: Sequence MiniBrute through USB, how to set it up?
« Reply #3 on: January 10, 2013, 11:24:06 am »
Mac driver is usually multi client, windows one is not.
Bruno
Arturia Hardware

 

Carbonate design by Bloc
SMF 2.0.2 | SMF © 2011, Simple Machines