September 03, 2014, 06:53:48 am
Welcome, Guest. Please login or register.
Did you miss your activation email
News: Arturia's webmaster is glad to offer you these brand new forums ! Have fun using it and feel free to email any encountered problem at webmaster@arturia.com.

Arturia Forums



Author Topic: Aftertouch try, pitch bend broken and no aftertouch sentů fix  (Read 135 times)

mkultra

  • Apprentice
  • *
  • Posts: 4
  • Karma: 0
Ok,
So I tried to recalibrate my aftertouch with the instructions on pg 46 of the manual and was left with a keyboard that didn't transmit aftertouch and whose pitch wheel didn't work.  After spending about an hour searching the internet, I finally came across a solution in french.  Please translate and repost this page:

http://fr.audiofanzine.com/pack-mao/arturia/Analog-Factory-Experience/forums/t.513716,clavier-analog-factory-et-calibration-aftertouch.html

 To summarize: enter calibration mode: power while holding the Shift button and the Search button to select the after touch: press (forcefully) a key => 3 LED should light calibrate min: while exerting the desired minimum pressure, press "Octave -" calibrate max: while exerting maximum pressure desired, press "Octave +" Exit the calibration mode: press the search button Do not put immediately on (updated flash memory occurs after a slight delay)


After doing this, and waiting a bit, things started to work again and I did another initialize

Cheers!

 

Carbonate design by Bloc
SMF 2.0.2 | SMF © 2011, Simple Machines