March 28, 2024, 11:25:16 am
Welcome, Guest. Please login or register
News:

Arturia Forums



Author Topic: Problems with USB connectivity  (Read 2871 times)

jack

  • Apprentice
  • Apprentice
  • *
  • Posts: 4
  • Karma: 0
Problems with USB connectivity
« on: December 25, 2013, 07:45:57 am »
Hi,

After un-installing and reinstalling Analog Lab a number of times, I have realised that, if the USB cable for my MiniLab is not pressed all the way in to the unit, the lights work as though they should (ie the pads and buttons light up the way they should). However, the computer does not recognise the device. However, if I plug it the whole way into the unit, the pad and octave buttons flash uncontrollably and the device does not sync with the computer or other programs.

Is this just a driver problem?

vaikl

  • Full Member
  • ***
  • Posts: 236
  • Karma: 9
Re: Problems with USB connectivity
« Reply #1 on: December 27, 2013, 10:45:01 pm »
Sounds like a defective USB cable/connector or port. You should exchange the cable or check it on another PC.

nvr2stond

  • Apprentice
  • Apprentice
  • *
  • Posts: 9
  • Karma: 0
Re: Problems with USB connectivity
« Reply #2 on: January 11, 2014, 03:48:47 am »
What OS are you running?

Im running win 8 x 64 and when I plug in the minilab ( using the cable that came with it or others ) the buttons just flash red non stop and it just connects / disconnects over and over again.

WORST PRODUCT EVER!

LOST A POTENTIAL LIFETIME CUSTOMER!

Best part about the minilab is that I CAN RETURN IT!

HORRIBLE HORRIBLE HORRIBLE

nvr2stond

  • Apprentice
  • Apprentice
  • *
  • Posts: 9
  • Karma: 0
Re: Problems with USB connectivity
« Reply #3 on: January 11, 2014, 07:09:57 pm »
I just got back from guitar center returned the minilab for an Axiom AIR Mini 32 works as soon as I plug it in , no headaches what so ever.

My suggestion to everyone here would be to AVOID ARTURIA at ALL COSTS , their products are HORRIBLE so is their support. STAY AWAY from ARTURIA.

vaikl

  • Full Member
  • ***
  • Posts: 236
  • Karma: 9
Re: Problems with USB connectivity
« Reply #4 on: January 11, 2014, 07:53:26 pm »
No, thanks. I'll stay with the best products and that is - among others - Arturia.

Sometimes it seems that some trolls are trying to capture this forum....

nvr2stond

  • Apprentice
  • Apprentice
  • *
  • Posts: 9
  • Karma: 0
Re: Problems with USB connectivity
« Reply #5 on: January 11, 2014, 08:12:46 pm »
the best products?

haha what a joke that is.

the mini lab wont even work on win 8 x64 I would think that the best products would work on any operating system - the Axiom AIR Mini 32 was plug and play with no problems even installed the drivers for me. Arturia did not , they dont even have WORKING win8x64 drivers , hardly the best.

vaikl

  • Full Member
  • ***
  • Posts: 236
  • Karma: 9
Re: Problems with USB connectivity
« Reply #6 on: January 11, 2014, 08:22:45 pm »
It works absolutely fine here. And i don't need drivers, because the MiniLab itself need no drivers to install. Maybe you have misunderstood something?

 

Carbonate design by Bloc
SMF 2.0.17 | SMF © 2019, Simple Machines