March 19, 2024, 12:18:58 pm
Welcome, Guest. Please login or register
News:

Arturia Forums



Author Topic: Can't Mute Instruments Using Spark With Logic  (Read 2303 times)

yangtze

  • Apprentice
  • Apprentice
  • *
  • Posts: 20
  • Karma: 3
    • Yangtze's Soundcloud
Can't Mute Instruments Using Spark With Logic
« on: March 17, 2013, 04:38:15 pm »
I'm trying to record the individual instruments of a Spark pattern in Logic by soloing Spark tracks, or muting those tracks I don't want to record. However, whenever I try this either way the supposedly muted tracks are only dipped, and can still be heard at a lower volume.

Anyone else have the same problem? Is there a workaround?

(By the way, I know there is a procedure to record individual Spark tracks in Logic with one pass, but this records the tracks dry without effects, and I find the tracks record at a very low volume. I should be able to record individual tracks the way I suggest. Why can't I do this, anyone?)

Kevin

  • Hero Member
  • *****
  • Posts: 1.545
  • Karma: 82
    • http://www.arturia.com
Re: Can't Mute Instruments Using Spark With Logic
« Reply #1 on: March 18, 2013, 09:16:21 am »
Hi,
can you send me an audio example and if possible a Logic project?

I will try to figure out what is the problem.

Kevin
Kevin
Soft Arturia

yangtze

  • Apprentice
  • Apprentice
  • *
  • Posts: 20
  • Karma: 3
    • Yangtze's Soundcloud
Re: Can't Mute Instruments Using Spark With Logic
« Reply #2 on: March 18, 2013, 02:14:01 pm »
Thanks for the offer Kevin. I Quit Logic and re-opened, and now the individual tracks are recording fine when soloed. I don't know why there was a problem originally, but whatever the issue was it seems to have rectified itself.

I'll let you know if it resurfaces.

 

Carbonate design by Bloc
SMF 2.0.17 | SMF © 2019, Simple Machines