March 28, 2024, 02:11:25 pm
Welcome, Guest. Please login or register
News:

Arturia Forums



Author Topic: Sequencing Monotribe with BeatStep  (Read 3916 times)

Tubey

  • Newbie
  • *
  • Posts: 2
  • Karma: 0
Sequencing Monotribe with BeatStep
« on: August 20, 2014, 03:40:19 am »
Hello,

I'd like to be able to sequence the monotribe with the BeatStep. Need help figuring it out. Both devices upgraded to latest firmware.

Thanks :)

Dav1d

  • Hero Member
  • Hero Member
  • *****
  • Posts: 624
  • Karma: 48
Re: Sequencing Monotribe with BeatStep
« Reply #1 on: August 25, 2014, 01:48:23 pm »
There is some examples on the web with the MiniBrute for example:
https://www.youtube.com/watch?v=HIv0wSTluiM

Have you tried to plug the CV out on the BeatStep into the CV in of the MonoTribe?
What's the result?



Tubey

  • Newbie
  • *
  • Posts: 2
  • Karma: 0
Re: Sequencing Monotribe with BeatStep
« Reply #2 on: August 27, 2014, 12:36:09 am »
Yes, no response.

illintechnology

  • Apprentice
  • Apprentice
  • *
  • Posts: 33
  • Karma: 1
    • JonnyX and the Groadies web-blag
Re: Sequencing Monotribe with BeatStep
« Reply #3 on: August 27, 2014, 05:37:51 am »
You'll need to have the current firmware on your Monotribe and then follow the instructions to configure the Monotribe for external CV control and Volt per Octave scaling. You'll also need the proper cable/s to get the pitch and gate CV signals to the Monotribe. The Monotribe has a TRRS 1/8" input, finding the proper pre-built cable is difficult, I used a Nokia a/v cable.
-illintechnology

JX:ATG
groadudes.bandcamp.com
https://soundcloud.com/groadies
@jx_atg

 

Carbonate design by Bloc
SMF 2.0.17 | SMF © 2019, Simple Machines