September 19, 2014, 07:56:07 pm
Welcome, Guest. Please login or register.
Did you miss your activation email
News: Arturia's webmaster is glad to offer you these brand new forums ! Have fun using it and feel free to email any encountered problem at webmaster@arturia.com.

Arturia Forums



Author Topic: FM Modulation on 2600  (Read 3479 times)

braincode

  • Newbie
  • *
  • Posts: 2
  • Karma: 0
    • http://www.BrainCode.net
FM Modulation on 2600
« on: February 15, 2005, 12:39:38 pm »
I've been test driving the demo version of the Arp 2600v and made the following observation with respect to modulating one audible oscilator's frequency with another oscilator running at the same audible frequency (to sort of emulate simple FM sythesis principles). I noticed that when modulation is introduced the timbre changes but the overall pitch of the resultant waveform does not remain constant at different modulation depths, as one would expect when performing FM modulation at matched (or related frequencies).

This leads me to believe that the waveform performing the modulation (a sine wave, to keep it simple) is biased in some way (or effectively becomes so). Perhaps the modulating waveform troughs (lows) are not treated as negatives (being either zero values at their lowest point or perhaps the negative amplitudes are 'flipped' into positive amplitudes). This, at least, appears to be what the results of FM modulation on the 2600v appears to sound like when moving the modulation slider to vary the amount of this type of modulation.

Is this how the original 2600's FM modulation functioned?
Basically, I'd like to know whether on an original Arp 2600 if I were to have one oscilator audible (say oscilator 3) and introduced modulation from another oscilator runing at the same tuned frequency (say oscilator 2), would the resultant's note's pitch remain the same as I moved the modulation depth's slider whilst only the note's timbre and harmonics changed.

This is basically what would happen on a DX7 FM synthesizer. I see no reason why the principle would not remain the same on an analogue system, provided that the control voltages from the modulation source were to fluctuate between -x and +x 'volts' with 0 volts representing the midpoint of the waveforms overall amplitude (the horzontal axis).

Is anyone fortunate enough to have access to a real 2600 to test this out on?

and, am I making any sense? :wink:

FabP

  • Jr. Member
  • **
  • Posts: 86
  • Karma: 0
FM Modulation on 2600
« Reply #1 on: February 28, 2005, 06:05:00 pm »
Hello braincode,

Your remarks and observations are absolutely pertinent and true : there's a little pitch deviation when you apply FM modulation on an oscillator. In fact FM modulation may not produce such a pitch deviation, neither with a DX-7 nor with an ARP 2600.

TAE technology implies certain constraints and require some adjustments from long testing and hearing sessions, like you did. The FM pitch deviation is a point that we didn't notice before the first realease of the ARP, but that we are correcting and that will be OK in the next update, thanks to users who made such attentive remarks.
Fabrice PAUMIER
ARTURIA Marketing Manager

braincode

  • Newbie
  • *
  • Posts: 2
  • Karma: 0
    • http://www.BrainCode.net
FM Modulation on 2600
« Reply #2 on: March 05, 2005, 09:51:22 am »
Thanks, Fabrice, for the response :D

I'm glad you plan to address this in the next update. I think it will be a great benefit for users to be able to generate rich waveforms without the need to retune. Infact, being able to control the FM modulation depth (via a midi controller, etc) while retaining the same note will be very useful musically.

I thoroughly enjoyed the Demo Version of Arturia ARP 2600 and hope to purchase it in the not-too-distant future (I'm having to spend my cash in other areas at the moment :( ). An ARP 2600 is one machine I always dreamed of owning (that, and the 'customizable' Roland System 100M)

regards,
braincode

 

Carbonate design by Bloc
SMF 2.0.2 | SMF © 2011, Simple Machines