Arturia - MatrixBrute

MatrixBrute is arguably the most powerful analog monophonic synthesizer ever ! As flexible as a modular system but offering presets, MatrixBrute is a dream machine for everyone interested in creating a sound palette of their own.

US$ 2 499.00 - Buy Now

Or find a dealer near you

Downloads & manuals for MatrixBrute

FIRMWARE

Name	Date	Size	Version	Infos
New MatrixBrute Firmware	25-Mar-2021	704.6 Kb	2.0.2.1186	MatrixBrute release notes V 2.0.2 Improvements Arp and Seq can now start without receiving a MIDI start message V 2.0.1 New features Sleep mode/Screen saver Song position pointer handling Bugfixes [SEQUENCER] When slaved, playback now stays in sync when loading a new preset Sequencer is not randomly stopped when looping in certain DAWs When slaved, sequencer no longer starts by itself when disabling MIDI Sync In MIDI sync + Record on, no more stuck note when holding a key and pressing play on Master device Sequence no longer drifts in time when slaved with 1&2PPQ Hold a tied step (dim lit) and change its note (turn mod amount) doesn't transform it into a trigger step (full lit) anymore [LFO] When MIDI slaved and the sequencer playing, LFOs phase could be offset after loading a new sequence preset LFO Phase could be offset when restarting the Sequencer with Restart button when SeqMod<0 LFO 2 Rate modulation was applied on 2nd key press when modulated by Kbd/Seq [Duo Split] Lower Glide is now reproduced as expected Playing Legato on Lower when Legato=Off & Seq=Play was stopping Sequencer Sequencer glide were enabling Glide on Upper Only Releasing note on Lower could silence note on Upper Glide can now be enable on the Upper part without disabling Sequencer Switching Key hold to OFF could silence upper notes [OTHER] MIDI loopbacks on swing knob no longer freezes the UI When saved, Presets were retaining the name of their original slot 1st note of the sequence is now correctly reproduced after boot Modulation destinations names are no longer truncated after loading a preset A4 preset slot is no longer corrupted V 2.0 New features Standalone settings mode (Press PRESET + SEQ + MOD) Preset compare mode (Hold PRESET + Press preset slot) Custom waveform LFO (Hold LFO < + > to edit the waveform) LFO triplet and dotted divisions (Hold LFO SEQ-Sync + Press SEQ note, triplet or dotted) Access 4 pages of custom modulation destinations (16 custom destinations) Sequencer : Rotate sequence (Hold Tap + press SEQ < or >) Sequencer : Extend & duplicate sequence (Hold SEQ length + press SEQ >) Sequencer : Selected step note is now shown on the display Sequencer : New step edition methods (Hold one step/two steps + turn Mod knob) Sequencer : Multi-step erase (Hold two steps from the right to the left) Sequencer : BPM adjustment in whole numbers (Hold tap + turn Rate) In Duo-Split glide can be applied to the upper part (Hold Voice mode + Press Glide ON/OFF) Pitch-wheel dead zone can now be edited (MCC / Standalone settings) Glide mode selection (Rate/Time) Improvements Bipolar Audio Mod knobs could not be modulated when in their center position. Modulations now apply to the counter-clockwise routing. Various Panel mode improvements and fixes Panel button combo shortcuts can now be released in any order Init preset minor improvements Local Control state is now maintained on power-up, can be edited with Standalone Settings Sequencer : Keyboard can now be played when sequencer is ON with an empty sequence Sequencer : Reworked real-time modulation recording, stops after one cycle Sequencer : Legato can now be recorded in real time when legato is ON Sequencer : Reworked editing of notes and Seq Mod across modes (step recording, real-time recording, recording OFF) Sequencer : Stays in sync when changing preset Sequencer : Press record now enables the sequencer Arpeggiator : Velocity value per note Arpeggiator : Record can no longer be enabled in Arp and Matrix-Arp Velocity curves improvement Expression & Sustain pedal handling improvement VCO Coarse LED behavior improvement Bugfixes MIDI, USB and Clock Sync are now tight Sequencer now starts on time at any tempo LFOs are now stable when tempo-synced Clock out is no longer reseted to 48 ppq when USB slaved All parameters are now properly initialized when loading a preset Various Duo-Split mode fixes (Glide, Sequencer, Legato) Seq Mod steps can now be properly edited Save in Panel mode is now consistent VC01 < Noise > VCF1 knob behavior now targets the right destination No more gate/trigger issues when MIDI slaved Switching Key Hold OFF doesn't silence the currently played notes When playing with record On, Tap Tempo doesn't modify the seq length anymore No more risk to be stuck between Preset and Panel mode No more note OFF when note velocity value is 0 OSC3 waveform browsing is no longer inverted CC handling improvements : Parameters are now properly sent and received Preset, SEQ and Mod buttons are now properly responding when the sequencer is playing Compare parameter offset no longer displays the preset page upon release In Duo-Split lower and upper MIDI channel can now be properly adjusted V 1.1.0.73 New features Real Time recording in sequencer for notes and Seq Mod Matrix Arpeggiator now available - Press Sequencer and Arpeggiator buttons simultaneously New clock added : 1 pulse per step, 1 pulse (korg) 24ppq & 48ppq Show offset between preset value and current value by holding PRESET button and turning a knob/slider Set MIDI note for 0V on both Pitch CV outputs in MIDI Control Center Improvements Auto Tune improvement : Improvement in Auto Tune feature by holding Panel and pressing Kbd Track in Osc 3 Faster preset loading Button parameters are now recalled after reboot in Panel mode No more clicks when changing presets Panel+Seq now loads an empty sequence Bugfixes Autotune does not interrupt sound anymore VCO3 kbd tracking can now be switched off in Panel mode Arpeggio not stuck when switching from Duo Split to Paraphonic mode Arpeggio now properly handles highest notes Duo Split mode can now be used with local control off Voice mode now stays in Duo Split when Setting split point Matrix now shows the right preset after a save Glide now acts on lower part in Duo Split Sustain message does not interrupt Note On No more missed trigs in envelope when using a short gate time and fast tempo in sequencer Note priority is now stored in the preset Ties now handled in random sequence mode No more stuck notes on Midi Out when switching preset Retrigger sequencer with each note when Legato is set to Off Error message when managing MatrixBrute presets from MCC with Memory Protect on No more conflict with LSB messages when 14-bit mode is off V 1.0.1.108 Bugfixes Key hold is now reset after chaining 2 sequence presets Sustain handling improvement CC64 and CC31 can now be automated MIDI Events lost somewhere on path from MIDI in to USB Arpeggio in multi-octave mode is properly reset when all notes are released V 1.0.0.97 MatrixBrute first firmware release
MatrixBrute Firmware	29-Apr-2020	704.5 Kb	2.0.1.952	MatrixBrute release notes V 2.0.1 New features Sleep mode/Screen saver Song position pointer handling Bugfixes [SEQUENCER] When slaved, playback now stays in sync when loading a new preset Sequencer is not randomly stopped when looping in certain DAWs When slaved, sequencer no longer starts by itself when disabling MIDI Sync In MIDI sync + Record on, no more stuck note when holding a key and pressing play on Master device Sequence no longer drifts in time when slaved with 1&2PPQ Hold a tied step (dim lit) and change its note (turn mod amount) doesn't transform it into a trigger step (full lit) anymore [LFO] When MIDI slaved and the sequencer playing, LFOs phase could be offset after loading a new sequence preset LFO Phase could be offset when restarting the Sequencer with Restart button when SeqMod<0 LFO 2 Rate modulation was applied on 2nd key press when modulated by Kbd/Seq [Duo Split] Lower Glide is now reproduced as expected Playing Legato on Lower when Legato=Off & Seq=Play was stopping Sequencer Sequencer glide were enabling Glide on Upper Only Releasing note on Lower could silence note on Upper Glide can now be enable on the Upper part without disabling Sequencer Switching Key hold to OFF could silence upper notes [OTHER] MIDI loopbacks on swing knob no longer freezes the UI When saved, Presets were retaining the name of their original slot 1st note of the sequence is now correctly reproduced after boot Modulation destinations names are no longer truncated after loading a preset A4 preset slot is no longer corrupted V 2.0 New features Standalone settings mode (Press PRESET + SEQ + MOD) Preset compare mode (Hold PRESET + Press preset slot) Custom waveform LFO (Hold LFO < + > to edit the waveform) LFO triplet and dotted divisions (Hold LFO SEQ-Sync + Press SEQ note, triplet or dotted) Access 4 pages of custom modulation destinations (16 custom destinations) Sequencer : Rotate sequence (Hold Tap + press SEQ < or >) Sequencer : Extend & duplicate sequence (Hold SEQ length + press SEQ >) Sequencer : Selected step note is now shown on the display Sequencer : New step edition methods (Hold one step/two steps + turn Mod knob) Sequencer : Multi-step erase (Hold two steps from the right to the left) Sequencer : BPM adjustment in whole numbers (Hold tap + turn Rate) In Duo-Split glide can be applied to the upper part (Hold Voice mode + Press Glide ON/OFF) Pitch-wheel dead zone can now be edited (MCC / Standalone settings) Glide mode selection (Rate/Time) Improvements Bipolar Audio Mod knobs could not be modulated when in their center position. Modulations now apply to the counter-clockwise routing. Various Panel mode improvements and fixes Panel button combo shortcuts can now be released in any order Init preset minor improvements Local Control state is now maintained on power-up, can be edited with Standalone Settings Sequencer : Keyboard can now be played when sequencer is ON with an empty sequence Sequencer : Reworked real-time modulation recording, stops after one cycle Sequencer : Legato can now be recorded in real time when legato is ON Sequencer : Reworked editing of notes and Seq Mod across modes (step recording, real-time recording, recording OFF) Sequencer : Stays in sync when changing preset Sequencer : Press record now enables the sequencer Arpeggiator : Velocity value per note Arpeggiator : Record can no longer be enabled in Arp and Matrix-Arp Velocity curves improvement Expression & Sustain pedal handling improvement VCO Coarse LED behavior improvement Bugfixes MIDI, USB and Clock Sync are now tight Sequencer now starts on time at any tempo LFOs are now stable when tempo-synced Clock out is no longer reseted to 48 ppq when USB slaved All parameters are now properly initialized when loading a preset Various Duo-Split mode fixes (Glide, Sequencer, Legato) Seq Mod steps can now be properly edited Save in Panel mode is now consistent VC01 < Noise > VCF1 knob behavior now targets the right destination No more gate/trigger issues when MIDI slaved Switching Key Hold OFF doesn't silence the currently played notes When playing with record On, Tap Tempo doesn't modify the seq length anymore No more risk to be stuck between Preset and Panel mode No more note OFF when note velocity value is 0 OSC3 waveform browsing is no longer inverted CC handling improvements : Parameters are now properly sent and received Preset, SEQ and Mod buttons are now properly responding when the sequencer is playing Compare parameter offset no longer displays the preset page upon release In Duo-Split lower and upper MIDI channel can now be properly adjusted V 1.1.0.73 New features Real Time recording in sequencer for notes and Seq Mod Matrix Arpeggiator now available - Press Sequencer and Arpeggiator buttons simultaneously New clock added : 1 pulse per step, 1 pulse (korg) 24ppq & 48ppq Show offset between preset value and current value by holding PRESET button and turning a knob/slider Set MIDI note for 0V on both Pitch CV outputs in MIDI Control Center Improvements Auto Tune improvement : Improvement in Auto Tune feature by holding Panel and pressing Kbd Track in Osc 3 Faster preset loading Button parameters are now recalled after reboot in Panel mode No more clicks when changing presets Panel+Seq now loads an empty sequence Bugfixes Autotune does not interrupt sound anymore VCO3 kbd tracking can now be switched off in Panel mode Arpeggio not stuck when switching from Duo Split to Paraphonic mode Arpeggio now properly handles highest notes Duo Split mode can now be used with local control off Voice mode now stays in Duo Split when Setting split point Matrix now shows the right preset after a save Glide now acts on lower part in Duo Split Sustain message does not interrupt Note On No more missed trigs in envelope when using a short gate time and fast tempo in sequencer Note priority is now stored in the preset Ties now handled in random sequence mode No more stuck notes on Midi Out when switching preset Retrigger sequencer with each note when Legato is set to Off Error message when managing MatrixBrute presets from MCC with Memory Protect on No more conflict with LSB messages when 14-bit mode is off V 1.0.1.108 Bugfixes Key hold is now reset after chaining 2 sequence presets Sustain handling improvement CC64 and CC31 can now be automated MIDI Events lost somewhere on path from MIDI in to USB Arpeggio in multi-octave mode is properly reset when all notes are released V 1.0.0.97 MatrixBrute first firmware release
MatrixBrute Firmware	26-Nov-2019	697.7 Kb	2.0.0.870	MatrixBrute release notes V 2.0 New features Standalone settings mode (Press PRESET + SEQ + MOD) Preset compare mode (Hold PRESET + Press preset slot) Custom waveform LFO (Hold LFO < + > to edit the waveform) LFO triplet and dotted divisions (Hold LFO SEQ-Sync + Press SEQ note, triplet or dotted) Access 4 pages of custom modulation destinations (16 custom destinations) Sequencer : Rotate sequence (Hold Tap + press SEQ < or >) Sequencer : Extend & duplicate sequence (Hold SEQ length + press SEQ >) Sequencer : Selected step note is now shown on the display Sequencer : New step edition methods (Hold one step/two steps + turn Mod knob) Sequencer : Multi-step erase (Hold two steps from the right to the left) Sequencer : BPM adjustment in whole numbers (Hold tap + turn Rate) In Duo-Split glide can be applied to the upper part (Hold Voice mode + Press Glide ON/OFF) Pitch-wheel dead zone can now be edited (MCC / Standalone settings) Glide mode selection (Rate/Time) Improvements Bipolar Audio Mod knobs could not be modulated when in their center position. Modulations now apply to the counter-clockwise routing. Various Panel mode improvements and fixes Panel button combo shortcuts can now be released in any order Init preset minor improvements Local Control state is now maintained on power-up, can be edited with Standalone Settings Sequencer : Keyboard can now be played when sequencer is ON with an empty sequence Sequencer : Reworked real-time modulation recording, stops after one cycle Sequencer : Legato can now be recorded in real time when legato is ON Sequencer : Reworked editing of notes and Seq Mod across modes (step recording, real-time recording, recording OFF) Sequencer : Stays in sync when changing preset Sequencer : Press record now enables the sequencer Arpeggiator : Velocity value per note Arpeggiator : Record can no longer be enabled in Arp and Matrix-Arp Velocity curves improvement Expression & Sustain pedal handling improvement VCO Coarse LED behavior improvement Bugfixes MIDI, USB and Clock Sync are now tight Sequencer now starts on time at any tempo LFOs are now stable when tempo-synced Clock out is no longer reseted to 48 ppq when USB slaved All parameters are now properly initialized when loading a preset Various Duo-Split mode fixes (Glide, Sequencer, Legato) Seq Mod steps can now be properly edited Save in Panel mode is now consistent VC01 < Noise > VCF1 knob behavior now targets the right destination No more gate/trigger issues when MIDI slaved Switching Key Hold OFF doesn't silence the currently played notes When playing with record On, Tap Tempo doesn't modify the seq length anymore No more risk to be stuck between Preset and Panel mode No more note OFF when note velocity value is 0 OSC3 waveform browsing is no longer inverted CC handling improvements : Parameters are now properly sent and received Preset, SEQ and Mod buttons are now properly responding when the sequencer is playing Compare parameter offset no longer displays the preset page upon release In Duo-Split lower and upper MIDI channel can now be properly adjusted V 1.1.0.73 New features Real Time recording in sequencer for notes and Seq Mod Matrix Arpeggiator now available - Press Sequencer and Arpeggiator buttons simultaneously New clock added : 1 pulse per step, 1 pulse (korg) 24ppq & 48ppq Show offset between preset value and current value by holding PRESET button and turning a knob/slider Set MIDI note for 0V on both Pitch CV outputs in MIDI Control Center Improvements Auto Tune improvement : Improvement in Auto Tune feature by holding Panel and pressing Kbd Track in Osc 3 Faster preset loading Button parameters are now recalled after reboot in Panel mode No more clicks when changing presets Panel+Seq now loads an empty sequence Bugfixes Autotune does not interrupt sound anymore VCO3 kbd tracking can now be switched off in Panel mode Arpeggio not stuck when switching from Duo Split to Paraphonic mode Arpeggio now properly handles highest notes Duo Split mode can now be used with local control off Voice mode now stays in Duo Split when Setting split point Matrix now shows the right preset after a save Glide now acts on lower part in Duo Split Sustain message does not interrupt Note On No more missed trigs in envelope when using a short gate time and fast tempo in sequencer Note priority is now stored in the preset Ties now handled in random sequence mode No more stuck notes on Midi Out when switching preset Retrigger sequencer with each note when Legato is set to Off Error message when managing MatrixBrute presets from MCC with Memory Protect on No more conflict with LSB messages when 14-bit mode is off V 1.0.1.108 Bugfixes Key hold is now reset after chaining 2 sequence presets Sustain handling improvement CC64 and CC31 can now be automated MIDI Events lost somewhere on path from MIDI in to USB Arpeggio in multi-octave mode is properly reset when all notes are released V 1.0.0.97 MatrixBrute first firmware release
MatrixBrute Firmware	24-Mar-2017	631.1 Kb	1.1.0.73	MatrixBrute Firmware V 1.1.0.73 New features Real Time recording in sequencer for notes and Seq Mod Matrix Arpeggiator now available - Press Sequencer and Arpeggiator buttons simultaneously New clock added : 1 pulse per step, 1 pulse (korg) 24ppq & 48ppq Show offset between preset value and current value by holding PRESET button and turning a knob/slider Set MIDI note for 0V on both Pitch CV outputs in MIDI Control Center Improvements Auto Tune improvement : Improvement in Auto Tune feature by holding Panel and pressing Kbd Track in Osc 3 Faster preset loading Button parameters are now recalled after reboot in Panel mode No more clicks when changing presets Panel+Seq now loads an empty sequence Bugfixes Autotune does not interrupt sound anymore VCO3 kbd tracking can now be switched off in Panel mode Arpeggio not stuck when switching from Duo Split to Paraphonic mode Arpeggio now properly handles highest notes Duo Split mode can now be used with local control off Voice mode now stays in Duo Split when Setting split point Matrix now shows the right preset after a save Glide now acts on lower part in Duo Split Sustain message does not interrupt Note On No more missed trigs in envelope when using a short gate time and fast tempo in sequencer Note priority is now stored in the preset Ties now handled in random sequence mode No more stuck notes on Midi Out when switching preset Retrigger sequencer with each note when Legato is set to Off Error message when managing MatrixBrute presets from MCC with Memory Protect on No more conflict with LSB messages when 14-bit mode is off V 1.0.1.108 Bugfixes Key hold is now reset after chaining 2 sequence presets Sustain handling improvement CC64 and CC31 can now be automated MIDI Events lost somewhere on path from MIDI in to USB Arpeggio in multi-octave mode is properly reset when all notes are released V 1.0.0.97 MatrixBrute first firmware release
MatrixBrute Firmware	29-Dec-2016	613.2 Kb	1.0.1.108	MatrixBrute Firmware V 1.0.1.108 Fixes Key hold is now reset after chaining 2 sequence presets Sustain handling improvement CC64 and CC31 can now be automated MIDI Events lost somewhere on path from MIDI in to USB Arpeggio in multi-octave mode is properly reset when all notes are released V 1.0.0.97 MatrixBrute first firmware release
MatrixBrute Firmware	16-Dec-2016	612.7 Kb	1.0.0.97	MatrixBrute Firmware V 1.0.0.97 MatrixBrute first firmware release

MANUALS

Manual	Date	Size	Version
New MatrixBrute DE Manual	04-Nov-2019	7.4 Mb	2.0.1
New MatrixBrute ES Manual	04-Nov-2019	7.5 Mb	2.0.1
New MatrixBrute FR Manual	04-Nov-2019	7.5 Mb	2.0.1
New MatrixBrute EN Manual	08-Nov-2019	7.4 Mb	2.0.1
New MatrixBrute JP Manual	08-Nov-2019	18.7 Mb	2.0.1
MatrixBrute ES 2.0 Changes Manual	22-Nov-2019	213.7 Kb	2.0
MatrixBrute FR 2.0 Changes Manual	22-Nov-2019	218.5 Kb	2.0
MatrixBrute EN 2.0 Changes Manual	23-Nov-2019	203.2 Kb	2.0
MatrixBrute DE 2.0 Changes Manual	25-Nov-2019	217.1 Kb	2.0
MatrixBrute JP 2.0 Changes Manual	25-Nov-2019	13.1 Mb	2.0
New MatrixBrute Cheat Sheet Manual	26-Nov-2019	1.3 Mb	2.0

Midi Control Center

SOFTWARE

Platform	Name	Date	Size	Version	Infos
10.10+	Midi Control Center	29-Jul-2019	39.5 Mb	1.9.1.1186	MIDI Control Center V 1.9.1 New Features Updated embedded firmware versions for all products Add support and parameters for KeyStep firmware 1.1.0 V 1.9.0 New Features Microlab integration KeyLab MKII : added support of USB to CV out KeyLab MKII : added acceleration on knobs Keylab MKII : added support of MMC messages Keylab MKII : Midi notes can now be assigned to sustain, expression and auxiliary pedals Improvements Improved Firmware version detection for every device V1.8.1 New features Integration of Keylab88 MKII Fixes Fix MicroFreak Factory Bank 1.1 V1.8.0 New features Integration of Microfreak Integration of Arturia USB MIDI driver for Microfreak in Windows version, allows "multi-client" MIDI handling, for Microfreak only. Integration of 2 factory preset banks for the Microfreak Improvements Improved Firmware version detection for every device Fixes MatrixBrute : Presets name, type, and characteristics can now be edited in device's area MatrixBrute : No more failure when renaming projects Matrixbrute : Interval between projects now follows scroll position properly V1.7.5 Fixes Updated embedded firmware versions for all products Various Typos corrections V 1.7.4 New Features DrumBrute Impact added to the list of devices V 1.7.3 New Features KeyLab mkII added to the list of devices MCC will recall the previous display size on reopening Fixes MatrixBrute : Factory project is now well displayed on osx 10.13 V 1.7.1 New Features Integration of MiniBrute 2 & MiniBrute 2S V 1.7.0 New Features Integration of Keylab Essential Integration of BeatStep Pro 2.0 Integration of MiniBrute Integration of MicroBrute MiniLab mk2 firmware update now expects later releases Uninstall from ASC Manual is accessible from the MCC Fixes Various BeatStep Pro fixes MIDI Console now shows events even when Sync is off Various MIDI Console fixes V 1.6.2 New Features MatrixBrute : Added VCO 1 & 2 CV 0v Offset MatrixBrute : Added Lower Part MIDI Channel MatrixBrute : Improved Sync Clock In/Out Settings Fixes MatrixBrute : Preset info properly loaded when selecting MatrixBrute in the list of devices V 1.6.1 New Features Drumbrute : added Roller/Looper section Improvements Improve tooltip message when Sync not available Failed to open device : a better workflow/popup is now provided Fixes Drumbrute : "All" has been removed from global midi channel V 1.6.0 New Features MatrixBrute added to the list of devices Fixes Updated Minilab MK2 firmware for offline update V 1.5.1 Fixes MIDI Control Center properly handles firmware updates when the computer is offline V 1.5.0 - Minilab-mkII New Features Minilab MkII added to the list of devices Fixes After a firmware update, MCC displays properly device settings No more crashes if drumbrute is disconnected while transferring data V 1.4.0 - DrumBrute New Features DrumBrute added to the list of devices Fixes Improved memory handling for MiniLab - Sync or Working Memory manipulations created issues Updated BeatStep firmware for offline update Devices are now not editable when in firmware update mode It is now possible to read the connected device's firmware version after an update of the MCC V 1.3.2 Fixes Beatstep : wrong embedded FW V 1.3.1 New Features Keystep : add courbe "soft" for aftertouch issue Keystep : set popup to update fw if version smaller Keystep : update fw reboot message Fixes Auto-Update : Updater tool is missing mouseUp/mouseDrag bad handled on Mac BeatStep Pro : update FW indicator issue Keylab 88 : missing value for pad velocity curve Keylab 88 : Snap button as KBD memory - memory number default value is wrong V 1.3.0 - KeyStep New Features KeyStep added to the list of devices KeyLab88 : velocity curves Fixes BeatStep pro : Crash when editing step Importing device settings, impossible to find the file to import User template(s) missing 's' Button configuration no more available Limit zoom out in piano roll and drum roll V 1.2.2 New Features BeatStep pro : Add Wait To Load Pattern function Fixes BeatStep pro : wrong global settings at opening BeatStep pro : Wrong param id Seq2 Hz/V 1V MIDI Note BeatStep pro : New factory preset (MIDI&USB, Wait to load ON, Pas to Midi Channel USER) BeatStep pro : "Device not connected" pop up when BSP not connected V 1.2.1 Fixes BeatStep pro : Remove Sync feature on BSP Update FW recalling update popup BeatStep pro : set drum map range to [0,127] BeatStep pro : inversion Seq1 Gate et Seq 2 Pitch KeyLab 88 : update (transpose, bank MSB for pads, sustain pedal threshold) Minimal Required version popup : 1.1.0.4 for KL88, 1.1.2.0 for BSP V 1.2.0 - BeatStepPro New Features Auto-Update MCC Automatic download of latest firmware HW Test interface BeatStepPro support : piano roll support bulks partial transfert of parameters from computer to device device global parameters V 1.1.0 - BeatStep New Features BeatStep support. Edit your sequences and user scales directly in the MIDI Control Center. V 1.0.1 Fixes Mac 10.9 and Windows 8: Some devices were not properly seen as connected or the communication failed. If you experienced this bug on Mac 10.9, you might have to open Audio MIDI Setup and remove the MIDI Devices that had this problem.
Win 7+	Midi Control Center	29-Jul-2019	25.2 Mb	1.9.1.1186	MIDI Control Center V 1.9.1 New Features Updated embedded firmware versions for all products Add support and parameters for KeyStep firmware 1.1.0 V 1.9.0 New Features Microlab integration KeyLab MKII : added support of USB to CV out KeyLab MKII : added acceleration on knobs Keylab MKII : added support of MMC messages Keylab MKII : Midi notes can now be assigned to sustain, expression and auxiliary pedals Improvements Improved Firmware version detection for every device V1.8.1 New features Integration of Keylab88 MKII Fixes Fix MicroFreak Factory Bank 1.1 V1.8.0 New features Integration of Microfreak Integration of Arturia USB MIDI driver for Microfreak in Windows version, allows "multi-client" MIDI handling, for Microfreak only. Integration of 2 factory preset banks for the Microfreak Improvements Improved Firmware version detection for every device Fixes MatrixBrute : Presets name, type, and characteristics can now be edited in device's area MatrixBrute : No more failure when renaming projects Matrixbrute : Interval between projects now follows scroll position properly V1.7.5 Fixes Updated embedded firmware versions for all products Various Typos corrections V 1.7.4 New Features DrumBrute Impact added to the list of devices V 1.7.3 New Features KeyLab mkII added to the list of devices MCC will recall the previous display size on reopening Fixes MatrixBrute : Factory project is now well displayed on osx 10.13 V 1.7.1 New Features Integration of MiniBrute 2 & MiniBrute 2S V 1.7.0 New Features Integration of Keylab Essential Integration of BeatStep Pro 2.0 Integration of MiniBrute Integration of MicroBrute MiniLab mk2 firmware update now expects later releases Uninstall from ASC Manual is accessible from the MCC Fixes Various BeatStep Pro fixes MIDI Console now shows events even when Sync is off Various MIDI Console fixes V 1.6.2 New Features MatrixBrute : Added VCO 1 & 2 CV 0v Offset MatrixBrute : Added Lower Part MIDI Channel MatrixBrute : Improved Sync Clock In/Out Settings Fixes MatrixBrute : Preset info properly loaded when selecting MatrixBrute in the list of devices V 1.6.1 New Features Drumbrute : added Roller/Looper section Improvements Improve tooltip message when Sync not available Failed to open device : a better workflow/popup is now provided Fixes Drumbrute : "All" has been removed from global midi channel V 1.6.0 New Features MatrixBrute added to the list of devices Fixes Updated Minilab MK2 firmware for offline update V 1.5.1 Fixes MIDI Control Center properly handles firmware updates when the computer is offline V 1.5.0 - Minilab-mkII New Features Minilab MkII added to the list of devices Fixes After a firmware update, MCC displays properly device settings No more crashes if drumbrute is disconnected while transferring data V 1.4.0 - DrumBrute New Features DrumBrute added to the list of devices Fixes Improved memory handling for MiniLab - Sync or Working Memory manipulations created issues Updated BeatStep firmware for offline update Devices are now not editable when in firmware update mode It is now possible to read the connected device's firmware version after an update of the MCC V 1.3.2 Fixes Beatstep : wrong embedded FW V 1.3.1 New Features Keystep : add courbe "soft" for aftertouch issue Keystep : set popup to update fw if version smaller Keystep : update fw reboot message Fixes Auto-Update : Updater tool is missing mouseUp/mouseDrag bad handled on Mac BeatStep Pro : update FW indicator issue Keylab 88 : missing value for pad velocity curve Keylab 88 : Snap button as KBD memory - memory number default value is wrong V 1.3.0 - KeyStep New Features KeyStep added to the list of devices KeyLab88 : velocity curves Fixes BeatStep pro : Crash when editing step Importing device settings, impossible to find the file to import User template(s) missing 's' Button configuration no more available Limit zoom out in piano roll and drum roll V 1.2.2 New Features BeatStep pro : Add Wait To Load Pattern function Fixes BeatStep pro : wrong global settings at opening BeatStep pro : Wrong param id Seq2 Hz/V 1V MIDI Note BeatStep pro : New factory preset (MIDI&USB, Wait to load ON, Pas to Midi Channel USER) BeatStep pro : "Device not connected" pop up when BSP not connected V 1.2.1 Fixes BeatStep pro : Remove Sync feature on BSP Update FW recalling update popup BeatStep pro : set drum map range to [0,127] BeatStep pro : inversion Seq1 Gate et Seq 2 Pitch KeyLab 88 : update (transpose, bank MSB for pads, sustain pedal threshold) Minimal Required version popup : 1.1.0.4 for KL88, 1.1.2.0 for BSP V 1.2.0 - BeatStepPro New Features Auto-Update MCC Automatic download of latest firmware HW Test interface BeatStepPro support : piano roll support bulks partial transfert of parameters from computer to device device global parameters V 1.1.0 - BeatStep New Features BeatStep support. Edit your sequences and user scales directly in the MIDI Control Center. V 1.0.1 Fixes Mac 10.9 and Windows 8: Some devices were not properly seen as connected or the communication failed. If you experienced this bug on Mac 10.9, you might have to open Audio MIDI Setup and remove the MIDI Devices that had this problem.
10.10+	Midi Control Center	22-Jul-2019	39.1 Mb	1.9.0.1174	MIDI Control Center V 1.9.0 New Features Microlab integration KeyLab MKII : added support of USB to CV out KeyLab MKII : added acceleration on knobs Keylab MKII : added support of MMC messages Keylab MKII : Midi notes can now be assigned to sustain, expression and auxiliary pedals Improvements Improved Firmware version detection for every device V1.8.1 New features Integration of Keylab88 MKII Fixes Fix MicroFreak Factory Bank 1.1 V1.8.0 New features Integration of Microfreak Integration of Arturia USB MIDI driver for Microfreak in Windows version, allows "multi-client" MIDI handling, for Microfreak only. Integration of 2 factory preset banks for the Microfreak Improvements Improved Firmware version detection for every device Fixes MatrixBrute : Presets name, type, and characteristics can now be edited in device's area MatrixBrute : No more failure when renaming projects Matrixbrute : Interval between projects now follows scroll position properly V1.7.5 Fixes Updated embedded firmware versions for all products Various Typos corrections V 1.7.4 New Features DrumBrute Impact added to the list of devices V 1.7.3 New Features KeyLab mkII added to the list of devices MCC will recall the previous display size on reopening Fixes MatrixBrute : Factory project is now well displayed on osx 10.13 V 1.7.1 New Features Integration of MiniBrute 2 & MiniBrute 2S V 1.7.0 New Features Integration of Keylab Essential Integration of BeatStep Pro 2.0 Integration of MiniBrute Integration of MicroBrute MiniLab mk2 firmware update now expects later releases Uninstall from ASC Manual is accessible from the MCC Fixes Various BeatStep Pro fixes MIDI Console now shows events even when Sync is off Various MIDI Console fixes V 1.6.2 New Features MatrixBrute : Added VCO 1 & 2 CV 0v Offset MatrixBrute : Added Lower Part MIDI Channel MatrixBrute : Improved Sync Clock In/Out Settings Fixes MatrixBrute : Preset info properly loaded when selecting MatrixBrute in the list of devices V 1.6.1 New Features Drumbrute : added Roller/Looper section Improvements Improve tooltip message when Sync not available Failed to open device : a better workflow/popup is now provided Fixes Drumbrute : "All" has been removed from global midi channel V 1.6.0 New Features MatrixBrute added to the list of devices Fixes Updated Minilab MK2 firmware for offline update V 1.5.1 Fixes MIDI Control Center properly handles firmware updates when the computer is offline V 1.5.0 - Minilab-mkII New Features Minilab MkII added to the list of devices Fixes After a firmware update, MCC displays properly device settings No more crashes if drumbrute is disconnected while transferring data V 1.4.0 - DrumBrute New Features DrumBrute added to the list of devices Fixes Improved memory handling for MiniLab - Sync or Working Memory manipulations created issues Updated BeatStep firmware for offline update Devices are now not editable when in firmware update mode It is now possible to read the connected device's firmware version after an update of the MCC V 1.3.2 Fixes Beatstep : wrong embedded FW V 1.3.1 New Features Keystep : add courbe "soft" for aftertouch issue Keystep : set popup to update fw if version smaller Keystep : update fw reboot message Fixes Auto-Update : Updater tool is missing mouseUp/mouseDrag bad handled on Mac BeatStep Pro : update FW indicator issue Keylab 88 : missing value for pad velocity curve Keylab 88 : Snap button as KBD memory - memory number default value is wrong V 1.3.0 - KeyStep New Features KeyStep added to the list of devices KeyLab88 : velocity curves Fixes BeatStep pro : Crash when editing step Importing device settings, impossible to find the file to import User template(s) missing 's' Button configuration no more available Limit zoom out in piano roll and drum roll V 1.2.2 New Features BeatStep pro : Add Wait To Load Pattern function Fixes BeatStep pro : wrong global settings at opening BeatStep pro : Wrong param id Seq2 Hz/V 1V MIDI Note BeatStep pro : New factory preset (MIDI&USB, Wait to load ON, Pas to Midi Channel USER) BeatStep pro : "Device not connected" pop up when BSP not connected V 1.2.1 Fixes BeatStep pro : Remove Sync feature on BSP Update FW recalling update popup BeatStep pro : set drum map range to [0,127] BeatStep pro : inversion Seq1 Gate et Seq 2 Pitch KeyLab 88 : update (transpose, bank MSB for pads, sustain pedal threshold) Minimal Required version popup : 1.1.0.4 for KL88, 1.1.2.0 for BSP V 1.2.0 - BeatStepPro New Features Auto-Update MCC Automatic download of latest firmware HW Test interface BeatStepPro support : piano roll support bulks partial transfert of parameters from computer to device device global parameters V 1.1.0 - BeatStep New Features BeatStep support. Edit your sequences and user scales directly in the MIDI Control Center. V 1.0.1 Fixes Mac 10.9 and Windows 8: Some devices were not properly seen as connected or the communication failed. If you experienced this bug on Mac 10.9, you might have to open Audio MIDI Setup and remove the MIDI Devices that had this problem.
Win 7+	Midi Control Center	22-Jul-2019	25.1 Mb	1.9.0.1174	MIDI Control Center V 1.9.0 New Features Microlab integration KeyLab MKII : added support of USB to CV out KeyLab MKII : added acceleration on knobs Keylab MKII : added support of MMC messages Keylab MKII : Midi notes can now be assigned to sustain, expression and auxiliary pedals Improvements Improved Firmware version detection for every device V1.8.1 New features Integration of Keylab88 MKII Fixes Fix MicroFreak Factory Bank 1.1 V1.8.0 New features Integration of Microfreak Integration of Arturia USB MIDI driver for Microfreak in Windows version, allows "multi-client" MIDI handling, for Microfreak only. Integration of 2 factory preset banks for the Microfreak Improvements Improved Firmware version detection for every device Fixes MatrixBrute : Presets name, type, and characteristics can now be edited in device's area MatrixBrute : No more failure when renaming projects Matrixbrute : Interval between projects now follows scroll position properly V1.7.5 Fixes Updated embedded firmware versions for all products Various Typos corrections V 1.7.4 New Features DrumBrute Impact added to the list of devices V 1.7.3 New Features KeyLab mkII added to the list of devices MCC will recall the previous display size on reopening Fixes MatrixBrute : Factory project is now well displayed on osx 10.13 V 1.7.1 New Features Integration of MiniBrute 2 & MiniBrute 2S V 1.7.0 New Features Integration of Keylab Essential Integration of BeatStep Pro 2.0 Integration of MiniBrute Integration of MicroBrute MiniLab mk2 firmware update now expects later releases Uninstall from ASC Manual is accessible from the MCC Fixes Various BeatStep Pro fixes MIDI Console now shows events even when Sync is off Various MIDI Console fixes V 1.6.2 New Features MatrixBrute : Added VCO 1 & 2 CV 0v Offset MatrixBrute : Added Lower Part MIDI Channel MatrixBrute : Improved Sync Clock In/Out Settings Fixes MatrixBrute : Preset info properly loaded when selecting MatrixBrute in the list of devices V 1.6.1 New Features Drumbrute : added Roller/Looper section Improvements Improve tooltip message when Sync not available Failed to open device : a better workflow/popup is now provided Fixes Drumbrute : "All" has been removed from global midi channel V 1.6.0 New Features MatrixBrute added to the list of devices Fixes Updated Minilab MK2 firmware for offline update V 1.5.1 Fixes MIDI Control Center properly handles firmware updates when the computer is offline V 1.5.0 - Minilab-mkII New Features Minilab MkII added to the list of devices Fixes After a firmware update, MCC displays properly device settings No more crashes if drumbrute is disconnected while transferring data V 1.4.0 - DrumBrute New Features DrumBrute added to the list of devices Fixes Improved memory handling for MiniLab - Sync or Working Memory manipulations created issues Updated BeatStep firmware for offline update Devices are now not editable when in firmware update mode It is now possible to read the connected device's firmware version after an update of the MCC V 1.3.2 Fixes Beatstep : wrong embedded FW V 1.3.1 New Features Keystep : add courbe "soft" for aftertouch issue Keystep : set popup to update fw if version smaller Keystep : update fw reboot message Fixes Auto-Update : Updater tool is missing mouseUp/mouseDrag bad handled on Mac BeatStep Pro : update FW indicator issue Keylab 88 : missing value for pad velocity curve Keylab 88 : Snap button as KBD memory - memory number default value is wrong V 1.3.0 - KeyStep New Features KeyStep added to the list of devices KeyLab88 : velocity curves Fixes BeatStep pro : Crash when editing step Importing device settings, impossible to find the file to import User template(s) missing 's' Button configuration no more available Limit zoom out in piano roll and drum roll V 1.2.2 New Features BeatStep pro : Add Wait To Load Pattern function Fixes BeatStep pro : wrong global settings at opening BeatStep pro : Wrong param id Seq2 Hz/V 1V MIDI Note BeatStep pro : New factory preset (MIDI&USB, Wait to load ON, Pas to Midi Channel USER) BeatStep pro : "Device not connected" pop up when BSP not connected V 1.2.1 Fixes BeatStep pro : Remove Sync feature on BSP Update FW recalling update popup BeatStep pro : set drum map range to [0,127] BeatStep pro : inversion Seq1 Gate et Seq 2 Pitch KeyLab 88 : update (transpose, bank MSB for pads, sustain pedal threshold) Minimal Required version popup : 1.1.0.4 for KL88, 1.1.2.0 for BSP V 1.2.0 - BeatStepPro New Features Auto-Update MCC Automatic download of latest firmware HW Test interface BeatStepPro support : piano roll support bulks partial transfert of parameters from computer to device device global parameters V 1.1.0 - BeatStep New Features BeatStep support. Edit your sequences and user scales directly in the MIDI Control Center. V 1.0.1 Fixes Mac 10.9 and Windows 8: Some devices were not properly seen as connected or the communication failed. If you experienced this bug on Mac 10.9, you might have to open Audio MIDI Setup and remove the MIDI Devices that had this problem.
10.10+	Midi Control Center	19-Jun-2019	38.6 Mb	1.8.1.1122	MIDI Control Center V1.8.1 New features Integration of Keylab88 MKII Fixes Fix MicroFreak Factory Bank 1.1 V1.8.0 New features Integration of Microfreak Integration of Arturia USB MIDI driver for Microfreak in Windows version, allows "multi-client" MIDI handling, for Microfreak only. Integration of 2 factory preset banks for the Microfreak Improvements Improved Firmware version detection for every device Fixes MatrixBrute : Presets name, type, and characteristics can now be edited in device's area MatrixBrute : No more failure when renaming projects Matrixbrute : Interval between projects now follows scroll position properly V1.7.5 Fixes Updated embedded firmware versions for all products Various Typos corrections V 1.7.4 New Features DrumBrute Impact added to the list of devices V 1.7.3 New Features KeyLab mkII added to the list of devices MCC will recall the previous display size on reopening Fixes MatrixBrute : Factory project is now well displayed on osx 10.13 V 1.7.1 New Features Integration of MiniBrute 2 & MiniBrute 2S V 1.7.0 New Features Integration of Keylab Essential Integration of BeatStep Pro 2.0 Integration of MiniBrute Integration of MicroBrute MiniLab mk2 firmware update now expects later releases Uninstall from ASC Manual is accessible from the MCC Fixes Various BeatStep Pro fixes MIDI Console now shows events even when Sync is off Various MIDI Console fixes V 1.6.2 New Features MatrixBrute : Added VCO 1 & 2 CV 0v Offset MatrixBrute : Added Lower Part MIDI Channel MatrixBrute : Improved Sync Clock In/Out Settings Fixes MatrixBrute : Preset info properly loaded when selecting MatrixBrute in the list of devices V 1.6.1 New Features Drumbrute : added Roller/Looper section Improvements Improve tooltip message when Sync not available Failed to open device : a better workflow/popup is now provided Fixes Drumbrute : "All" has been removed from global midi channel V 1.6.0 New Features MatrixBrute added to the list of devices Fixes Updated Minilab MK2 firmware for offline update V 1.5.1 Fixes MIDI Control Center properly handles firmware updates when the computer is offline V 1.5.0 - Minilab-mkII New Features Minilab MkII added to the list of devices Fixes After a firmware update, MCC displays properly device settings No more crashes if drumbrute is disconnected while transferring data V 1.4.0 - DrumBrute New Features DrumBrute added to the list of devices Fixes Improved memory handling for MiniLab - Sync or Working Memory manipulations created issues Updated BeatStep firmware for offline update Devices are now not editable when in firmware update mode It is now possible to read the connected device's firmware version after an update of the MCC V 1.3.2 Fixes Beatstep : wrong embedded FW V 1.3.1 New Features Keystep : add courbe "soft" for aftertouch issue Keystep : set popup to update fw if version smaller Keystep : update fw reboot message Fixes Auto-Update : Updater tool is missing mouseUp/mouseDrag bad handled on Mac BeatStep Pro : update FW indicator issue Keylab 88 : missing value for pad velocity curve Keylab 88 : Snap button as KBD memory - memory number default value is wrong V 1.3.0 - KeyStep New Features KeyStep added to the list of devices KeyLab88 : velocity curves Fixes BeatStep pro : Crash when editing step Importing device settings, impossible to find the file to import User template(s) missing 's' Button configuration no more available Limit zoom out in piano roll and drum roll V 1.2.2 New Features BeatStep pro : Add Wait To Load Pattern function Fixes BeatStep pro : wrong global settings at opening BeatStep pro : Wrong param id Seq2 Hz/V 1V MIDI Note BeatStep pro : New factory preset (MIDI&USB, Wait to load ON, Pas to Midi Channel USER) BeatStep pro : "Device not connected" pop up when BSP not connected V 1.2.1 Fixes BeatStep pro : Remove Sync feature on BSP Update FW recalling update popup BeatStep pro : set drum map range to [0,127] BeatStep pro : inversion Seq1 Gate et Seq 2 Pitch KeyLab 88 : update (transpose, bank MSB for pads, sustain pedal threshold) Minimal Required version popup : 1.1.0.4 for KL88, 1.1.2.0 for BSP V 1.2.0 - BeatStepPro New Features Auto-Update MCC Automatic download of latest firmware HW Test interface BeatStepPro support : piano roll support bulks partial transfert of parameters from computer to device device global parameters V 1.1.0 - BeatStep New Features BeatStep support. Edit your sequences and user scales directly in the MIDI Control Center. V 1.0.1 Fixes Mac 10.9 and Windows 8: Some devices were not properly seen as connected or the communication failed. If you experienced this bug on Mac 10.9, you might have to open Audio MIDI Setup and remove the MIDI Devices that had this problem.
Win 7+	Midi Control Center	19-Jun-2019	24.7 Mb	1.8.1.1122	MIDI Control Center V1.8.1 New features Integration of Keylab88 MKII Fixes Fix MicroFreak Factory Bank 1.1 V1.8.0 New features Integration of Microfreak Integration of Arturia USB MIDI driver for Microfreak in Windows version, allows "multi-client" MIDI handling, for Microfreak only. Integration of 2 factory preset banks for the Microfreak Improvements Improved Firmware version detection for every device Fixes MatrixBrute : Presets name, type, and characteristics can now be edited in device's area MatrixBrute : No more failure when renaming projects Matrixbrute : Interval between projects now follows scroll position properly V1.7.5 Fixes Updated embedded firmware versions for all products Various Typos corrections V 1.7.4 New Features DrumBrute Impact added to the list of devices V 1.7.3 New Features KeyLab mkII added to the list of devices MCC will recall the previous display size on reopening Fixes MatrixBrute : Factory project is now well displayed on osx 10.13 V 1.7.1 New Features Integration of MiniBrute 2 & MiniBrute 2S V 1.7.0 New Features Integration of Keylab Essential Integration of BeatStep Pro 2.0 Integration of MiniBrute Integration of MicroBrute MiniLab mk2 firmware update now expects later releases Uninstall from ASC Manual is accessible from the MCC Fixes Various BeatStep Pro fixes MIDI Console now shows events even when Sync is off Various MIDI Console fixes V 1.6.2 New Features MatrixBrute : Added VCO 1 & 2 CV 0v Offset MatrixBrute : Added Lower Part MIDI Channel MatrixBrute : Improved Sync Clock In/Out Settings Fixes MatrixBrute : Preset info properly loaded when selecting MatrixBrute in the list of devices V 1.6.1 New Features Drumbrute : added Roller/Looper section Improvements Improve tooltip message when Sync not available Failed to open device : a better workflow/popup is now provided Fixes Drumbrute : "All" has been removed from global midi channel V 1.6.0 New Features MatrixBrute added to the list of devices Fixes Updated Minilab MK2 firmware for offline update V 1.5.1 Fixes MIDI Control Center properly handles firmware updates when the computer is offline V 1.5.0 - Minilab-mkII New Features Minilab MkII added to the list of devices Fixes After a firmware update, MCC displays properly device settings No more crashes if drumbrute is disconnected while transferring data V 1.4.0 - DrumBrute New Features DrumBrute added to the list of devices Fixes Improved memory handling for MiniLab - Sync or Working Memory manipulations created issues Updated BeatStep firmware for offline update Devices are now not editable when in firmware update mode It is now possible to read the connected device's firmware version after an update of the MCC V 1.3.2 Fixes Beatstep : wrong embedded FW V 1.3.1 New Features Keystep : add courbe "soft" for aftertouch issue Keystep : set popup to update fw if version smaller Keystep : update fw reboot message Fixes Auto-Update : Updater tool is missing mouseUp/mouseDrag bad handled on Mac BeatStep Pro : update FW indicator issue Keylab 88 : missing value for pad velocity curve Keylab 88 : Snap button as KBD memory - memory number default value is wrong V 1.3.0 - KeyStep New Features KeyStep added to the list of devices KeyLab88 : velocity curves Fixes BeatStep pro : Crash when editing step Importing device settings, impossible to find the file to import User template(s) missing 's' Button configuration no more available Limit zoom out in piano roll and drum roll V 1.2.2 New Features BeatStep pro : Add Wait To Load Pattern function Fixes BeatStep pro : wrong global settings at opening BeatStep pro : Wrong param id Seq2 Hz/V 1V MIDI Note BeatStep pro : New factory preset (MIDI&USB, Wait to load ON, Pas to Midi Channel USER) BeatStep pro : "Device not connected" pop up when BSP not connected V 1.2.1 Fixes BeatStep pro : Remove Sync feature on BSP Update FW recalling update popup BeatStep pro : set drum map range to [0,127] BeatStep pro : inversion Seq1 Gate et Seq 2 Pitch KeyLab 88 : update (transpose, bank MSB for pads, sustain pedal threshold) Minimal Required version popup : 1.1.0.4 for KL88, 1.1.2.0 for BSP V 1.2.0 - BeatStepPro New Features Auto-Update MCC Automatic download of latest firmware HW Test interface BeatStepPro support : piano roll support bulks partial transfert of parameters from computer to device device global parameters V 1.1.0 - BeatStep New Features BeatStep support. Edit your sequences and user scales directly in the MIDI Control Center. V 1.0.1 Fixes Mac 10.9 and Windows 8: Some devices were not properly seen as connected or the communication failed. If you experienced this bug on Mac 10.9, you might have to open Audio MIDI Setup and remove the MIDI Devices that had this problem.
10.10+	Midi Control Center	04-Apr-2019	38.6 Mb	1.8.0.1031	MIDI Control Center V1.8.0 New features Integration of Microfreak Integration of Arturia USB MIDI driver for Microfreak in Windows version, allows "multi-client" MIDI handling, for Microfreak only. Integration of 2 factory preset banks for the Microfreak Improvements Improved Firmware version detection for every device Fixes MatrixBrute : Presets name, type, and characteristics can now be edited in device's area MatrixBrute : No more failure when renaming projects Matrixbrute : Interval between projects now follows scroll position properly V1.7.5 Fixes Updated embedded firmware versions for all products Various Typos corrections V 1.7.4 New Features DrumBrute Impact added to the list of devices V 1.7.3 New Features KeyLab mkII added to the list of devices MCC will recall the previous display size on reopening Fixes MatrixBrute : Factory project is now well displayed on osx 10.13 V 1.7.1 New Features Integration of MiniBrute 2 & MiniBrute 2S V 1.7.0 New Features Integration of Keylab Essential Integration of BeatStep Pro 2.0 Integration of MiniBrute Integration of MicroBrute MiniLab mk2 firmware update now expects later releases Uninstall from ASC Manual is accessible from the MCC Fixes Various BeatStep Pro fixes MIDI Console now shows events even when Sync is off Various MIDI Console fixes V 1.6.2 New Features MatrixBrute : Added VCO 1 & 2 CV 0v Offset MatrixBrute : Added Lower Part MIDI Channel MatrixBrute : Improved Sync Clock In/Out Settings Fixes MatrixBrute : Preset info properly loaded when selecting MatrixBrute in the list of devices V 1.6.1 New Features Drumbrute : added Roller/Looper section Improvements Improve tooltip message when Sync not available Failed to open device : a better workflow/popup is now provided Fixes Drumbrute : "All" has been removed from global midi channel V 1.6.0 New Features MatrixBrute added to the list of devices Fixes Updated Minilab MK2 firmware for offline update V 1.5.1 Fixes MIDI Control Center properly handles firmware updates when the computer is offline V 1.5.0 - Minilab-mkII New Features Minilab MkII added to the list of devices Fixes After a firmware update, MCC displays properly device settings No more crashes if drumbrute is disconnected while transferring data V 1.4.0 - DrumBrute New Features DrumBrute added to the list of devices Fixes Improved memory handling for MiniLab - Sync or Working Memory manipulations created issues Updated BeatStep firmware for offline update Devices are now not editable when in firmware update mode It is now possible to read the connected device's firmware version after an update of the MCC V 1.3.2 Fixes Beatstep : wrong embedded FW V 1.3.1 New Features Keystep : add courbe "soft" for aftertouch issue Keystep : set popup to update fw if version smaller Keystep : update fw reboot message Fixes Auto-Update : Updater tool is missing mouseUp/mouseDrag bad handled on Mac BeatStep Pro : update FW indicator issue Keylab 88 : missing value for pad velocity curve Keylab 88 : Snap button as KBD memory - memory number default value is wrong V 1.3.0 - KeyStep New Features KeyStep added to the list of devices KeyLab88 : velocity curves Fixes BeatStep pro : Crash when editing step Importing device settings, impossible to find the file to import User template(s) missing 's' Button configuration no more available Limit zoom out in piano roll and drum roll V 1.2.2 New Features BeatStep pro : Add Wait To Load Pattern function Fixes BeatStep pro : wrong global settings at opening BeatStep pro : Wrong param id Seq2 Hz/V 1V MIDI Note BeatStep pro : New factory preset (MIDI&USB, Wait to load ON, Pas to Midi Channel USER) BeatStep pro : "Device not connected" pop up when BSP not connected V 1.2.1 Fixes BeatStep pro : Remove Sync feature on BSP Update FW recalling update popup BeatStep pro : set drum map range to [0,127] BeatStep pro : inversion Seq1 Gate et Seq 2 Pitch KeyLab 88 : update (transpose, bank MSB for pads, sustain pedal threshold) Minimal Required version popup : 1.1.0.4 for KL88, 1.1.2.0 for BSP V 1.2.0 - BeatStepPro New Features Auto-Update MCC Automatic download of latest firmware HW Test interface BeatStepPro support : piano roll support bulks partial transfert of parameters from computer to device device global parameters V 1.1.0 - BeatStep New Features BeatStep support. Edit your sequences and user scales directly in the MIDI Control Center. V 1.0.1 Fixes Mac 10.9 and Windows 8: Some devices were not properly seen as connected or the communication failed. If you experienced this bug on Mac 10.9, you might have to open Audio MIDI Setup and remove the MIDI Devices that had this problem.
Win 7+	Midi Control Center	04-Apr-2019	24.7 Mb	1.8.0.1031	MIDI Control Center V1.8.0 New features Integration of Microfreak Integration of Arturia USB MIDI driver for Microfreak in Windows version, allows "multi-client" MIDI handling, for Microfreak only. Integration of 2 factory preset banks for the Microfreak Improvements Improved Firmware version detection for every device Fixes MatrixBrute : Presets name, type, and characteristics can now be edited in device's area MatrixBrute : No more failure when renaming projects Matrixbrute : Interval between projects now follows scroll position properly V1.7.5 Fixes Updated embedded firmware versions for all products Various Typos corrections V 1.7.4 New Features DrumBrute Impact added to the list of devices V 1.7.3 New Features KeyLab mkII added to the list of devices MCC will recall the previous display size on reopening Fixes MatrixBrute : Factory project is now well displayed on osx 10.13 V 1.7.1 New Features Integration of MiniBrute 2 & MiniBrute 2S V 1.7.0 New Features Integration of Keylab Essential Integration of BeatStep Pro 2.0 Integration of MiniBrute Integration of MicroBrute MiniLab mk2 firmware update now expects later releases Uninstall from ASC Manual is accessible from the MCC Fixes Various BeatStep Pro fixes MIDI Console now shows events even when Sync is off Various MIDI Console fixes V 1.6.2 New Features MatrixBrute : Added VCO 1 & 2 CV 0v Offset MatrixBrute : Added Lower Part MIDI Channel MatrixBrute : Improved Sync Clock In/Out Settings Fixes MatrixBrute : Preset info properly loaded when selecting MatrixBrute in the list of devices V 1.6.1 New Features Drumbrute : added Roller/Looper section Improvements Improve tooltip message when Sync not available Failed to open device : a better workflow/popup is now provided Fixes Drumbrute : "All" has been removed from global midi channel V 1.6.0 New Features MatrixBrute added to the list of devices Fixes Updated Minilab MK2 firmware for offline update V 1.5.1 Fixes MIDI Control Center properly handles firmware updates when the computer is offline V 1.5.0 - Minilab-mkII New Features Minilab MkII added to the list of devices Fixes After a firmware update, MCC displays properly device settings No more crashes if drumbrute is disconnected while transferring data V 1.4.0 - DrumBrute New Features DrumBrute added to the list of devices Fixes Improved memory handling for MiniLab - Sync or Working Memory manipulations created issues Updated BeatStep firmware for offline update Devices are now not editable when in firmware update mode It is now possible to read the connected device's firmware version after an update of the MCC V 1.3.2 Fixes Beatstep : wrong embedded FW V 1.3.1 New Features Keystep : add courbe "soft" for aftertouch issue Keystep : set popup to update fw if version smaller Keystep : update fw reboot message Fixes Auto-Update : Updater tool is missing mouseUp/mouseDrag bad handled on Mac BeatStep Pro : update FW indicator issue Keylab 88 : missing value for pad velocity curve Keylab 88 : Snap button as KBD memory - memory number default value is wrong V 1.3.0 - KeyStep New Features KeyStep added to the list of devices KeyLab88 : velocity curves Fixes BeatStep pro : Crash when editing step Importing device settings, impossible to find the file to import User template(s) missing 's' Button configuration no more available Limit zoom out in piano roll and drum roll V 1.2.2 New Features BeatStep pro : Add Wait To Load Pattern function Fixes BeatStep pro : wrong global settings at opening BeatStep pro : Wrong param id Seq2 Hz/V 1V MIDI Note BeatStep pro : New factory preset (MIDI&USB, Wait to load ON, Pas to Midi Channel USER) BeatStep pro : "Device not connected" pop up when BSP not connected V 1.2.1 Fixes BeatStep pro : Remove Sync feature on BSP Update FW recalling update popup BeatStep pro : set drum map range to [0,127] BeatStep pro : inversion Seq1 Gate et Seq 2 Pitch KeyLab 88 : update (transpose, bank MSB for pads, sustain pedal threshold) Minimal Required version popup : 1.1.0.4 for KL88, 1.1.2.0 for BSP V 1.2.0 - BeatStepPro New Features Auto-Update MCC Automatic download of latest firmware HW Test interface BeatStepPro support : piano roll support bulks partial transfert of parameters from computer to device device global parameters V 1.1.0 - BeatStep New Features BeatStep support. Edit your sequences and user scales directly in the MIDI Control Center. V 1.0.1 Fixes Mac 10.9 and Windows 8: Some devices were not properly seen as connected or the communication failed. If you experienced this bug on Mac 10.9, you might have to open Audio MIDI Setup and remove the MIDI Devices that had this problem.
10.10+	Midi Control Center	10-Oct-2018	42.3 Mb	1.7.5.812	MIDI Control Center V1.7.5 Fixes Updated embedded firmware versions for all products Various Typos corrections V 1.7.4 New Features DrumBrute Impact added to the list of devices V 1.7.3 New Features KeyLab mkII added to the list of devices MCC will recall the previous display size on reopening Fixes MatrixBrute : Factory project is now well displayed on osx 10.13 V 1.7.1 New Features Integration of MiniBrute 2 & MiniBrute 2S V 1.7.0 New Features Integration of Keylab Essential Integration of BeatStep Pro 2.0 Integration of MiniBrute Integration of MicroBrute MiniLab mk2 firmware update now expects later releases Uninstall from ASC Manual is accessible from the MCC Fixes Various BeatStep Pro fixes MIDI Console now shows events even when Sync is off Various MIDI Console fixes V 1.6.2 New Features MatrixBrute : Added VCO 1 & 2 CV 0v Offset MatrixBrute : Added Lower Part MIDI Channel MatrixBrute : Improved Sync Clock In/Out Settings Fixes MatrixBrute : Preset info properly loaded when selecting MatrixBrute in the list of devices V 1.6.1 New Features Drumbrute : added Roller/Looper section Improvements Improve tooltip message when Sync not available Failed to open device : a better workflow/popup is now provided Fixes Drumbrute : "All" has been removed from global midi channel V 1.6.0 New Features MatrixBrute added to the list of devices Fixes Updated Minilab MK2 firmware for offline update V 1.5.1 Fixes MIDI Control Center properly handles firmware updates when the computer is offline V 1.5.0 - Minilab-mkII New Features Minilab MkII added to the list of devices Fixes After a firmware update, MCC displays properly device settings No more crashes if drumbrute is disconnected while transferring data V 1.4.0 - DrumBrute New Features DrumBrute added to the list of devices Fixes Improved memory handling for MiniLab - Sync or Working Memory manipulations created issues Updated BeatStep firmware for offline update Devices are now not editable when in firmware update mode It is now possible to read the connected device's firmware version after an update of the MCC V 1.3.2 Fixes Beatstep : wrong embedded FW V 1.3.1 New Features Keystep : add courbe "soft" for aftertouch issue Keystep : set popup to update fw if version smaller Keystep : update fw reboot message Fixes Auto-Update : Updater tool is missing mouseUp/mouseDrag bad handled on Mac BeatStep Pro : update FW indicator issue Keylab 88 : missing value for pad velocity curve Keylab 88 : Snap button as KBD memory - memory number default value is wrong V 1.3.0 - KeyStep New Features KeyStep added to the list of devices KeyLab88 : velocity curves Fixes BeatStep pro : Crash when editing step Importing device settings, impossible to find the file to import User template(s) missing 's' Button configuration no more available Limit zoom out in piano roll and drum roll V 1.2.2 New Features BeatStep pro : Add Wait To Load Pattern function Fixes BeatStep pro : wrong global settings at opening BeatStep pro : Wrong param id Seq2 Hz/V 1V MIDI Note BeatStep pro : New factory preset (MIDI&USB, Wait to load ON, Pas to Midi Channel USER) BeatStep pro : "Device not connected" pop up when BSP not connected V 1.2.1 Fixes BeatStep pro : Remove Sync feature on BSP Update FW recalling update popup BeatStep pro : set drum map range to [0,127] BeatStep pro : inversion Seq1 Gate et Seq 2 Pitch KeyLab 88 : update (transpose, bank MSB for pads, sustain pedal threshold) Minimal Required version popup : 1.1.0.4 for KL88, 1.1.2.0 for BSP V 1.2.0 - BeatStepPro New Features Auto-Update MCC Automatic download of latest firmware HW Test interface BeatStepPro support : piano roll support bulks partial transfert of parameters from computer to device device global parameters V 1.1.0 - BeatStep New Features BeatStep support. Edit your sequences and user scales directly in the MIDI Control Center. V 1.0.1 Fixes Mac 10.9 and Windows 8: Some devices were not properly seen as connected or the communication failed. If you experienced this bug on Mac 10.9, you might have to open Audio MIDI Setup and remove the MIDI Devices that had this problem.
Win 7+	Midi Control Center	10-Oct-2018	22.2 Mb	1.7.5.812	MIDI Control Center V1.7.5 Fixes Updated embedded firmware versions for all products Various Typos corrections V 1.7.4 New Features DrumBrute Impact added to the list of devices V 1.7.3 New Features KeyLab mkII added to the list of devices MCC will recall the previous display size on reopening Fixes MatrixBrute : Factory project is now well displayed on osx 10.13 V 1.7.1 New Features Integration of MiniBrute 2 & MiniBrute 2S V 1.7.0 New Features Integration of Keylab Essential Integration of BeatStep Pro 2.0 Integration of MiniBrute Integration of MicroBrute MiniLab mk2 firmware update now expects later releases Uninstall from ASC Manual is accessible from the MCC Fixes Various BeatStep Pro fixes MIDI Console now shows events even when Sync is off Various MIDI Console fixes V 1.6.2 New Features MatrixBrute : Added VCO 1 & 2 CV 0v Offset MatrixBrute : Added Lower Part MIDI Channel MatrixBrute : Improved Sync Clock In/Out Settings Fixes MatrixBrute : Preset info properly loaded when selecting MatrixBrute in the list of devices V 1.6.1 New Features Drumbrute : added Roller/Looper section Improvements Improve tooltip message when Sync not available Failed to open device : a better workflow/popup is now provided Fixes Drumbrute : "All" has been removed from global midi channel V 1.6.0 New Features MatrixBrute added to the list of devices Fixes Updated Minilab MK2 firmware for offline update V 1.5.1 Fixes MIDI Control Center properly handles firmware updates when the computer is offline V 1.5.0 - Minilab-mkII New Features Minilab MkII added to the list of devices Fixes After a firmware update, MCC displays properly device settings No more crashes if drumbrute is disconnected while transferring data V 1.4.0 - DrumBrute New Features DrumBrute added to the list of devices Fixes Improved memory handling for MiniLab - Sync or Working Memory manipulations created issues Updated BeatStep firmware for offline update Devices are now not editable when in firmware update mode It is now possible to read the connected device's firmware version after an update of the MCC V 1.3.2 Fixes Beatstep : wrong embedded FW V 1.3.1 New Features Keystep : add courbe "soft" for aftertouch issue Keystep : set popup to update fw if version smaller Keystep : update fw reboot message Fixes Auto-Update : Updater tool is missing mouseUp/mouseDrag bad handled on Mac BeatStep Pro : update FW indicator issue Keylab 88 : missing value for pad velocity curve Keylab 88 : Snap button as KBD memory - memory number default value is wrong V 1.3.0 - KeyStep New Features KeyStep added to the list of devices KeyLab88 : velocity curves Fixes BeatStep pro : Crash when editing step Importing device settings, impossible to find the file to import User template(s) missing 's' Button configuration no more available Limit zoom out in piano roll and drum roll V 1.2.2 New Features BeatStep pro : Add Wait To Load Pattern function Fixes BeatStep pro : wrong global settings at opening BeatStep pro : Wrong param id Seq2 Hz/V 1V MIDI Note BeatStep pro : New factory preset (MIDI&USB, Wait to load ON, Pas to Midi Channel USER) BeatStep pro : "Device not connected" pop up when BSP not connected V 1.2.1 Fixes BeatStep pro : Remove Sync feature on BSP Update FW recalling update popup BeatStep pro : set drum map range to [0,127] BeatStep pro : inversion Seq1 Gate et Seq 2 Pitch KeyLab 88 : update (transpose, bank MSB for pads, sustain pedal threshold) Minimal Required version popup : 1.1.0.4 for KL88, 1.1.2.0 for BSP V 1.2.0 - BeatStepPro New Features Auto-Update MCC Automatic download of latest firmware HW Test interface BeatStepPro support : piano roll support bulks partial transfert of parameters from computer to device device global parameters V 1.1.0 - BeatStep New Features BeatStep support. Edit your sequences and user scales directly in the MIDI Control Center. V 1.0.1 Fixes Mac 10.9 and Windows 8: Some devices were not properly seen as connected or the communication failed. If you experienced this bug on Mac 10.9, you might have to open Audio MIDI Setup and remove the MIDI Devices that had this problem.
10.10+	Midi Control Center	04-Jul-2018	42.3 Mb	1.7.4.701	MIDI Control Center V 1.7.4 New Features DrumBrute Impact added to the list of devices V 1.7.3 New Features KeyLab mkII added to the list of devices MCC will recall the previous display size on reopening Fixes MatrixBrute : Factory project is now well displayed on osx 10.13 V 1.7.1 New Features Integration of MiniBrute 2 & MiniBrute 2S V 1.7.0 New Features Integration of Keylab Essential Integration of BeatStep Pro 2.0 Integration of MiniBrute Integration of MicroBrute MiniLab mk2 firmware update now expects later releases Uninstall from ASC Manual is accessible from the MCC Fixes Various BeatStep Pro fixes MIDI Console now shows events even when Sync is off Various MIDI Console fixes V 1.6.2 New Features MatrixBrute : Added VCO 1 & 2 CV 0v Offset MatrixBrute : Added Lower Part MIDI Channel MatrixBrute : Improved Sync Clock In/Out Settings Fixes MatrixBrute : Preset info properly loaded when selecting MatrixBrute in the list of devices V 1.6.1 New Features Drumbrute : added Roller/Looper section Improvements Improve tooltip message when Sync not available Failed to open device : a better workflow/popup is now provided Fixes Drumbrute : "All" has been removed from global midi channel V 1.6.0 New Features MatrixBrute added to the list of devices Fixes Updated Minilab MK2 firmware for offline update V 1.5.1 Fixes MIDI Control Center properly handles firmware updates when the computer is offline V 1.5.0 - Minilab-mkII New Features Minilab MkII added to the list of devices Fixes After a firmware update, MCC displays properly device settings No more crashes if drumbrute is disconnected while transferring data V 1.4.0 - DrumBrute New Features DrumBrute added to the list of devices Fixes Improved memory handling for MiniLab - Sync or Working Memory manipulations created issues Updated BeatStep firmware for offline update Devices are now not editable when in firmware update mode It is now possible to read the connected device's firmware version after an update of the MCC V 1.3.2 Fixes Beatstep : wrong embedded FW V 1.3.1 New Features Keystep : add courbe "soft" for aftertouch issue Keystep : set popup to update fw if version smaller Keystep : update fw reboot message Fixes Auto-Update : Updater tool is missing mouseUp/mouseDrag bad handled on Mac BeatStep Pro : update FW indicator issue Keylab 88 : missing value for pad velocity curve Keylab 88 : Snap button as KBD memory - memory number default value is wrong V 1.3.0 - KeyStep New Features KeyStep added to the list of devices KeyLab88 : velocity curves Fixes BeatStep pro : Crash when editing step Importing device settings, impossible to find the file to import User template(s) missing 's' Button configuration no more available Limit zoom out in piano roll and drum roll V 1.2.2 New Features BeatStep pro : Add Wait To Load Pattern function Fixes BeatStep pro : wrong global settings at opening BeatStep pro : Wrong param id Seq2 Hz/V 1V MIDI Note BeatStep pro : New factory preset (MIDI&USB, Wait to load ON, Pas to Midi Channel USER) BeatStep pro : "Device not connected" pop up when BSP not connected V 1.2.1 Fixes BeatStep pro : Remove Sync feature on BSP Update FW recalling update popup BeatStep pro : set drum map range to [0,127] BeatStep pro : inversion Seq1 Gate et Seq 2 Pitch KeyLab 88 : update (transpose, bank MSB for pads, sustain pedal threshold) Minimal Required version popup : 1.1.0.4 for KL88, 1.1.2.0 for BSP V 1.2.0 - BeatStepPro New Features Auto-Update MCC Automatic download of latest firmware HW Test interface BeatStepPro support : piano roll support bulks partial transfert of parameters from computer to device device global parameters V 1.1.0 - BeatStep New Features BeatStep support. Edit your sequences and user scales directly in the MIDI Control Center. V 1.0.1 Fixes Mac 10.9 and Windows 8: Some devices were not properly seen as connected or the communication failed. If you experienced this bug on Mac 10.9, you might have to open Audio MIDI Setup and remove the MIDI Devices that had this problem.
Win 7+	Midi Control Center	04-Jul-2018	22.2 Mb	1.7.4.701	MIDI Control Center V 1.7.4 New Features DrumBrute Impact added to the list of devices V 1.7.3 New Features KeyLab mkII added to the list of devices MCC will recall the previous display size on reopening Fixes MatrixBrute : Factory project is now well displayed on osx 10.13 V 1.7.1 New Features Integration of MiniBrute 2 & MiniBrute 2S V 1.7.0 New Features Integration of Keylab Essential Integration of BeatStep Pro 2.0 Integration of MiniBrute Integration of MicroBrute MiniLab mk2 firmware update now expects later releases Uninstall from ASC Manual is accessible from the MCC Fixes Various BeatStep Pro fixes MIDI Console now shows events even when Sync is off Various MIDI Console fixes V 1.6.2 New Features MatrixBrute : Added VCO 1 & 2 CV 0v Offset MatrixBrute : Added Lower Part MIDI Channel MatrixBrute : Improved Sync Clock In/Out Settings Fixes MatrixBrute : Preset info properly loaded when selecting MatrixBrute in the list of devices V 1.6.1 New Features Drumbrute : added Roller/Looper section Improvements Improve tooltip message when Sync not available Failed to open device : a better workflow/popup is now provided Fixes Drumbrute : "All" has been removed from global midi channel V 1.6.0 New Features MatrixBrute added to the list of devices Fixes Updated Minilab MK2 firmware for offline update V 1.5.1 Fixes MIDI Control Center properly handles firmware updates when the computer is offline V 1.5.0 - Minilab-mkII New Features Minilab MkII added to the list of devices Fixes After a firmware update, MCC displays properly device settings No more crashes if drumbrute is disconnected while transferring data V 1.4.0 - DrumBrute New Features DrumBrute added to the list of devices Fixes Improved memory handling for MiniLab - Sync or Working Memory manipulations created issues Updated BeatStep firmware for offline update Devices are now not editable when in firmware update mode It is now possible to read the connected device's firmware version after an update of the MCC V 1.3.2 Fixes Beatstep : wrong embedded FW V 1.3.1 New Features Keystep : add courbe "soft" for aftertouch issue Keystep : set popup to update fw if version smaller Keystep : update fw reboot message Fixes Auto-Update : Updater tool is missing mouseUp/mouseDrag bad handled on Mac BeatStep Pro : update FW indicator issue Keylab 88 : missing value for pad velocity curve Keylab 88 : Snap button as KBD memory - memory number default value is wrong V 1.3.0 - KeyStep New Features KeyStep added to the list of devices KeyLab88 : velocity curves Fixes BeatStep pro : Crash when editing step Importing device settings, impossible to find the file to import User template(s) missing 's' Button configuration no more available Limit zoom out in piano roll and drum roll V 1.2.2 New Features BeatStep pro : Add Wait To Load Pattern function Fixes BeatStep pro : wrong global settings at opening BeatStep pro : Wrong param id Seq2 Hz/V 1V MIDI Note BeatStep pro : New factory preset (MIDI&USB, Wait to load ON, Pas to Midi Channel USER) BeatStep pro : "Device not connected" pop up when BSP not connected V 1.2.1 Fixes BeatStep pro : Remove Sync feature on BSP Update FW recalling update popup BeatStep pro : set drum map range to [0,127] BeatStep pro : inversion Seq1 Gate et Seq 2 Pitch KeyLab 88 : update (transpose, bank MSB for pads, sustain pedal threshold) Minimal Required version popup : 1.1.0.4 for KL88, 1.1.2.0 for BSP V 1.2.0 - BeatStepPro New Features Auto-Update MCC Automatic download of latest firmware HW Test interface BeatStepPro support : piano roll support bulks partial transfert of parameters from computer to device device global parameters V 1.1.0 - BeatStep New Features BeatStep support. Edit your sequences and user scales directly in the MIDI Control Center. V 1.0.1 Fixes Mac 10.9 and Windows 8: Some devices were not properly seen as connected or the communication failed. If you experienced this bug on Mac 10.9, you might have to open Audio MIDI Setup and remove the MIDI Devices that had this problem.
10.10+	Midi Control Center	15-Jun-2018	40.7 Mb	1.7.3.678	MIDI Control Center V 1.7.3 New Features KeyLab mkII added to the list of devices MCC will recall the previous display size on reopening Fixes MatrixBrute : Factory project is now well displayed on osx 10.13 V 1.7.1 New Features Integration of MiniBrute 2 & MiniBrute 2S V 1.7.0 New Features Integration of Keylab Essential Integration of BeatStep Pro 2.0 Integration of MiniBrute Integration of MicroBrute MiniLab mk2 firmware update now expects later releases Uninstall from ASC Manual is accessible from the MCC Fixes Various BeatStep Pro fixes MIDI Console now shows events even when Sync is off Various MIDI Console fixes V 1.6.2 New Features MatrixBrute : Added VCO 1 & 2 CV 0v Offset MatrixBrute : Added Lower Part MIDI Channel MatrixBrute : Improved Sync Clock In/Out Settings Fixes MatrixBrute : Preset info properly loaded when selecting MatrixBrute in the list of devices V 1.6.1 New Features Drumbrute : added Roller/Looper section Improvements Improve tooltip message when Sync not available Failed to open device : a better workflow/popup is now provided Fixes Drumbrute : "All" has been removed from global midi channel V 1.6.0 New Features MatrixBrute added to the list of devices Fixes Updated Minilab MK2 firmware for offline update V 1.5.1 Fixes MIDI Control Center properly handles firmware updates when the computer is offline V 1.5.0 - Minilab-mkII New Features Minilab MkII added to the list of devices Fixes After a firmware update, MCC displays properly device settings No more crashes if drumbrute is disconnected while transferring data V 1.4.0 - DrumBrute New Features DrumBrute added to the list of devices Fixes Improved memory handling for MiniLab - Sync or Working Memory manipulations created issues Updated BeatStep firmware for offline update Devices are now not editable when in firmware update mode It is now possible to read the connected device's firmware version after an update of the MCC V 1.3.2 Fixes Beatstep : wrong embedded FW V 1.3.1 New Features Keystep : add courbe "soft" for aftertouch issue Keystep : set popup to update fw if version smaller Keystep : update fw reboot message Fixes Auto-Update : Updater tool is missing mouseUp/mouseDrag bad handled on Mac BeatStep Pro : update FW indicator issue Keylab 88 : missing value for pad velocity curve Keylab 88 : Snap button as KBD memory - memory number default value is wrong V 1.3.0 - KeyStep New Features KeyStep added to the list of devices KeyLab88 : velocity curves Fixes BeatStep pro : Crash when editing step Importing device settings, impossible to find the file to import User template(s) missing 's' Button configuration no more available Limit zoom out in piano roll and drum roll V 1.2.2 New Features BeatStep pro : Add Wait To Load Pattern function Fixes BeatStep pro : wrong global settings at opening BeatStep pro : Wrong param id Seq2 Hz/V 1V MIDI Note BeatStep pro : New factory preset (MIDI&USB, Wait to load ON, Pas to Midi Channel USER) BeatStep pro : "Device not connected" pop up when BSP not connected V 1.2.1 Fixes BeatStep pro : Remove Sync feature on BSP Update FW recalling update popup BeatStep pro : set drum map range to [0,127] BeatStep pro : inversion Seq1 Gate et Seq 2 Pitch KeyLab 88 : update (transpose, bank MSB for pads, sustain pedal threshold) Minimal Required version popup : 1.1.0.4 for KL88, 1.1.2.0 for BSP V 1.2.0 - BeatStepPro New Features Auto-Update MCC Automatic download of latest firmware HW Test interface BeatStepPro support : piano roll support bulks partial transfert of parameters from computer to device device global parameters V 1.1.0 - BeatStep New Features BeatStep support. Edit your sequences and user scales directly in the MIDI Control Center. V 1.0.1 Fixes Mac 10.9 and Windows 8: Some devices were not properly seen as connected or the communication failed. If you experienced this bug on Mac 10.9, you might have to open Audio MIDI Setup and remove the MIDI Devices that had this problem.
Win 7+	Midi Control Center	15-Jun-2018	20.7 Mb	1.7.3.678	MIDI Control Center V 1.7.3 New Features KeyLab mkII added to the list of devices MCC will recall the previous display size on reopening Fixes MatrixBrute : Factory project is now well displayed on osx 10.13 V 1.7.1 New Features Integration of MiniBrute 2 & MiniBrute 2S V 1.7.0 New Features Integration of Keylab Essential Integration of BeatStep Pro 2.0 Integration of MiniBrute Integration of MicroBrute MiniLab mk2 firmware update now expects later releases Uninstall from ASC Manual is accessible from the MCC Fixes Various BeatStep Pro fixes MIDI Console now shows events even when Sync is off Various MIDI Console fixes V 1.6.2 New Features MatrixBrute : Added VCO 1 & 2 CV 0v Offset MatrixBrute : Added Lower Part MIDI Channel MatrixBrute : Improved Sync Clock In/Out Settings Fixes MatrixBrute : Preset info properly loaded when selecting MatrixBrute in the list of devices V 1.6.1 New Features Drumbrute : added Roller/Looper section Improvements Improve tooltip message when Sync not available Failed to open device : a better workflow/popup is now provided Fixes Drumbrute : "All" has been removed from global midi channel V 1.6.0 New Features MatrixBrute added to the list of devices Fixes Updated Minilab MK2 firmware for offline update V 1.5.1 Fixes MIDI Control Center properly handles firmware updates when the computer is offline V 1.5.0 - Minilab-mkII New Features Minilab MkII added to the list of devices Fixes After a firmware update, MCC displays properly device settings No more crashes if drumbrute is disconnected while transferring data V 1.4.0 - DrumBrute New Features DrumBrute added to the list of devices Fixes Improved memory handling for MiniLab - Sync or Working Memory manipulations created issues Updated BeatStep firmware for offline update Devices are now not editable when in firmware update mode It is now possible to read the connected device's firmware version after an update of the MCC V 1.3.2 Fixes Beatstep : wrong embedded FW V 1.3.1 New Features Keystep : add courbe "soft" for aftertouch issue Keystep : set popup to update fw if version smaller Keystep : update fw reboot message Fixes Auto-Update : Updater tool is missing mouseUp/mouseDrag bad handled on Mac BeatStep Pro : update FW indicator issue Keylab 88 : missing value for pad velocity curve Keylab 88 : Snap button as KBD memory - memory number default value is wrong V 1.3.0 - KeyStep New Features KeyStep added to the list of devices KeyLab88 : velocity curves Fixes BeatStep pro : Crash when editing step Importing device settings, impossible to find the file to import User template(s) missing 's' Button configuration no more available Limit zoom out in piano roll and drum roll V 1.2.2 New Features BeatStep pro : Add Wait To Load Pattern function Fixes BeatStep pro : wrong global settings at opening BeatStep pro : Wrong param id Seq2 Hz/V 1V MIDI Note BeatStep pro : New factory preset (MIDI&USB, Wait to load ON, Pas to Midi Channel USER) BeatStep pro : "Device not connected" pop up when BSP not connected V 1.2.1 Fixes BeatStep pro : Remove Sync feature on BSP Update FW recalling update popup BeatStep pro : set drum map range to [0,127] BeatStep pro : inversion Seq1 Gate et Seq 2 Pitch KeyLab 88 : update (transpose, bank MSB for pads, sustain pedal threshold) Minimal Required version popup : 1.1.0.4 for KL88, 1.1.2.0 for BSP V 1.2.0 - BeatStepPro New Features Auto-Update MCC Automatic download of latest firmware HW Test interface BeatStepPro support : piano roll support bulks partial transfert of parameters from computer to device device global parameters V 1.1.0 - BeatStep New Features BeatStep support. Edit your sequences and user scales directly in the MIDI Control Center. V 1.0.1 Fixes Mac 10.9 and Windows 8: Some devices were not properly seen as connected or the communication failed. If you experienced this bug on Mac 10.9, you might have to open Audio MIDI Setup and remove the MIDI Devices that had this problem.
10.10+	New Midi Control Center	08-Dec-2021	78.8 Mb	1.13.6.8	MIDI Control Center V 1.13.6 New features MiniLab MkII : Changed Firmware file extension to .mnl2 Keylab Essential series : Changed Firmware file extension to .kle V 1.13.5 New Features KeyLab MKII: Embedded firmware is now version 1.3.1 V 1.13.4 New Features KeyLab MKII: Added Global Velocity curve in the Keyboard and Device Settings KeyLab MKII: Added Custom Velocity curve in the Device Settings Fixes MicroFreak : Audio files are now properly converted into wavetables V 1.13.3 New Features MicroFreak : Added a “Wavetables” panel for User Wavetables management MicroFreak : Added a “New presets 4.0” bank of 64 presets made for firmware 4.0.1 MicroFreak : Added a factory bank of wavetables in “Wavetables” Panel MicroFreak : Import any WAV or AIFF wavetable or audio file to convert it into User Wavetable MicroFreak : Support for drag and drop of Audio Files from computer to both “Computer” and “Microfreak” areas. MicroFreak : Integration of Firmware 4.0.1 Features (Oct LED Blink + Osc knob speed) V 1.13.2 New Features MatrixBrute : Embedded firmware is now version 2.0.0 Improvements Fix USB Crash V 1.13.1 New Features KeyStep Pro: Embedded firmware is now version 2.0.0 V 1.13.0 New Features MicroFreak : Firmware 3.0.6 integration MicroFreak : Added 128 preset slots in MicroFreak MicroFreak : Preset bank "Factory 3.0", with Vocoder presets on slots 304 to 320 Improvements MCC does not crash anymore when performing recall from KLE MicroFreak : improved preset transfer speed Various MicroFreak fixes Updated warning message when sending a bank to MicroFreak V 1.12.1 New Features KeyLab MKII: FW 1.2.4 support All Devices: Minor firmware upgrades bugfixes V 1.12.0 New Features KeyStep 37 integration V 1.11.5 New Features KeyStep Pro: Embedded firmware is now version 1.3.2 V 1.11.4 New Features KeyStep Pro: Embedded firmware is now version 1.3.1 KeyStep Pro: Add option to set Mod Wheel CV MOD Source KeyStep Pro: Add support for setting a Track output MIDI channel per project V 1.11.3 New Features MicroFreak : Added support for Firmware 2.1.3 (Vocoder Edition), compatible with all MicroFreak units MicroFreak : Added "Factory 2.1" bank of 224 presets , with Vocoder presets on slots 208 to 224 Updated embedded Firmware version for MicroFreak V 1.11.2 Improvements Minilab MKII 1.1.2.1166 integration Add the new pad backlight mode control from MCC Change the default color for pads in red Add the no color param for pads to allow pad backlight deactivation Allow the user to stop the octave led blinking Matrixbrute : implemented sleep mode setting V 1.11.1 New Features Embedded KeyStep Pro firmware is now version 1.1.7 Added a "firmware update available" popup Fixes KeyStep Pro: Controller Map is no longer visible KeyStep Pro: Added option to change CV Pitch Bend Range KeyStep Pro: Removed Knob Mode option in Control mode section KeyStep Pro: Minor text changes V 1.11.0 New Features KeyStep Pro integration Fixes MatrixBrute : update pop-up message is now fixed Matrixbrute : regeneration does not oscillate anymore on some presets Progress bar now better reflect the real firmware loading progress V 1.10.1 New Features KeyLab Essential 88 integration Microfreak firmware 2.0.3 integration Added "Factory 2.0" presets bank for the Microfreak Added relative bend, scale, and root note settings for the Microfreak Updated embedded firmware versions for all products V 1.10.0 New Features Added MatrixBrute Factory 2.0 bank for MCC MatrixBrute 2.0 Firmware integration Catalina compatibility: Notarize macOs installer Added a modal popup when transfering preset or memories Improvements Various improvements for preset transfer and communication with devices V 1.9.1 New Features Updated embedded firmware versions for all products Add support and parameters for KeyStep firmware 1.1.0 V 1.9.0 New Features Microlab integration KeyLab MKII : added support of USB to CV out KeyLab MKII : added acceleration on knobs Keylab MKII : added support of MMC messages Keylab MKII : Midi notes can now be assigned to sustain, expression and auxiliary pedals Improvements Improved Firmware version detection for every device V1.8.1 New features Integration of Keylab88 MKII Fixes Fix MicroFreak Factory Bank 1.1 V1.8.0 New features Integration of Microfreak Integration of Arturia USB MIDI driver for Microfreak in Windows version, allows "multi-client" MIDI handling, for Microfreak only. Integration of 2 factory preset banks for the Microfreak Improvements Improved Firmware version detection for every device Fixes MatrixBrute : Presets name, type, and characteristics can now be edited in device's area MatrixBrute : No more failure when renaming projects Matrixbrute : Interval between projects now follows scroll position properly V1.7.5 Fixes Updated embedded firmware versions for all products Various Typos corrections V 1.7.4 New Features DrumBrute Impact added to the list of devices V 1.7.3 New Features KeyLab mkII added to the list of devices MCC will recall the previous display size on reopening Fixes MatrixBrute : Factory project is now well displayed on osx 10.13 V 1.7.1 New Features Integration of MiniBrute 2 & MiniBrute 2S V 1.7.0 New Features Integration of Keylab Essential Integration of BeatStep Pro 2.0 Integration of MiniBrute Integration of MicroBrute MiniLab mk2 firmware update now expects later releases Uninstall from ASC Manual is accessible from the MCC Fixes Various BeatStep Pro fixes MIDI Console now shows events even when Sync is off Various MIDI Console fixes V 1.6.2 New Features MatrixBrute : Added VCO 1 & 2 CV 0v Offset MatrixBrute : Added Lower Part MIDI Channel MatrixBrute : Improved Sync Clock In/Out Settings Fixes MatrixBrute : Preset info properly loaded when selecting MatrixBrute in the list of devices V 1.6.1 New Features Drumbrute : added Roller/Looper section Improvements Improve tooltip message when Sync not available Failed to open device : a better workflow/popup is now provided Fixes Drumbrute : "All" has been removed from global midi channel V 1.6.0 New Features MatrixBrute added to the list of devices Fixes Updated Minilab MK2 firmware for offline update V 1.5.1 Fixes MIDI Control Center properly handles firmware updates when the computer is offline V 1.5.0 - Minilab-mkII New Features Minilab MkII added to the list of devices Fixes After a firmware update, MCC displays properly device settings No more crashes if drumbrute is disconnected while transferring data V 1.4.0 - DrumBrute New Features DrumBrute added to the list of devices Fixes Improved memory handling for MiniLab - Sync or Working Memory manipulations created issues Updated BeatStep firmware for offline update Devices are now not editable when in firmware update mode It is now possible to read the connected device's firmware version after an update of the MCC V 1.3.2 Fixes Beatstep : wrong embedded FW V 1.3.1 New Features Keystep : add courbe "soft" for aftertouch issue Keystep : set popup to update fw if version smaller Keystep : update fw reboot message Fixes Auto-Update : Updater tool is missing mouseUp/mouseDrag bad handled on Mac BeatStep Pro : update FW indicator issue Keylab 88 : missing value for pad velocity curve Keylab 88 : Snap button as KBD memory - memory number default value is wrong V 1.3.0 - KeyStep New Features KeyStep added to the list of devices KeyLab88 : velocity curves Fixes BeatStep pro : Crash when editing step Importing device settings, impossible to find the file to import User template(s) missing 's' Button configuration no more available Limit zoom out in piano roll and drum roll V 1.2.2 New Features BeatStep pro : Add Wait To Load Pattern function Fixes BeatStep pro : wrong global settings at opening BeatStep pro : Wrong param id Seq2 Hz/V 1V MIDI Note BeatStep pro : New factory preset (MIDI&USB, Wait to load ON, Pas to Midi Channel USER) BeatStep pro : "Device not connected" pop up when BSP not connected V 1.2.1 Fixes BeatStep pro : Remove Sync feature on BSP Update FW recalling update popup BeatStep pro : set drum map range to [0,127] BeatStep pro : inversion Seq1 Gate et Seq 2 Pitch KeyLab 88 : update (transpose, bank MSB for pads, sustain pedal threshold) Minimal Required version popup : 1.1.0.4 for KL88, 1.1.2.0 for BSP V 1.2.0 - BeatStepPro New Features Auto-Update MCC Automatic download of latest firmware HW Test interface BeatStepPro support : piano roll support bulks partial transfert of parameters from computer to device device global parameters V 1.1.0 - BeatStep New Features BeatStep support. Edit your sequences and user scales directly in the MIDI Control Center. V 1.0.1 Fixes Mac 10.9 and Windows 8: Some devices were not properly seen as connected or the communication failed. If you experienced this bug on Mac 10.9, you might have to open Audio MIDI Setup and remove the MIDI Devices that had this problem.
Win 7+	New Midi Control Center	08-Dec-2021	59.2 Mb	1.13.6.8	MIDI Control Center V 1.13.6 New features MiniLab MkII : Changed Firmware file extension to .mnl2 Keylab Essential series : Changed Firmware file extension to .kle V 1.13.5 New Features KeyLab MKII: Embedded firmware is now version 1.3.1 V 1.13.4 New Features KeyLab MKII: Added Global Velocity curve in the Keyboard and Device Settings KeyLab MKII: Added Custom Velocity curve in the Device Settings Fixes MicroFreak : Audio files are now properly converted into wavetables V 1.13.3 New Features MicroFreak : Added a “Wavetables” panel for User Wavetables management MicroFreak : Added a “New presets 4.0” bank of 64 presets made for firmware 4.0.1 MicroFreak : Added a factory bank of wavetables in “Wavetables” Panel MicroFreak : Import any WAV or AIFF wavetable or audio file to convert it into User Wavetable MicroFreak : Support for drag and drop of Audio Files from computer to both “Computer” and “Microfreak” areas. MicroFreak : Integration of Firmware 4.0.1 Features (Oct LED Blink + Osc knob speed) V 1.13.2 New Features MatrixBrute : Embedded firmware is now version 2.0.0 Improvements Fix USB Crash V 1.13.1 New Features KeyStep Pro: Embedded firmware is now version 2.0.0 V 1.13.0 New Features MicroFreak : Firmware 3.0.6 integration MicroFreak : Added 128 preset slots in MicroFreak MicroFreak : Preset bank "Factory 3.0", with Vocoder presets on slots 304 to 320 Improvements MCC does not crash anymore when performing recall from KLE MicroFreak : improved preset transfer speed Various MicroFreak fixes Updated warning message when sending a bank to MicroFreak V 1.12.1 New Features KeyLab MKII: FW 1.2.4 support All Devices: Minor firmware upgrades bugfixes V 1.12.0 New Features KeyStep 37 integration V 1.11.5 New Features KeyStep Pro: Embedded firmware is now version 1.3.2 V 1.11.4 New Features KeyStep Pro: Embedded firmware is now version 1.3.1 KeyStep Pro: Add option to set Mod Wheel CV MOD Source KeyStep Pro: Add support for setting a Track output MIDI channel per project V 1.11.3 New Features MicroFreak : Added support for Firmware 2.1.3 (Vocoder Edition), compatible with all MicroFreak units MicroFreak : Added "Factory 2.1" bank of 224 presets , with Vocoder presets on slots 208 to 224 Updated embedded Firmware version for MicroFreak V 1.11.2 Improvements Minilab MKII 1.1.2.1166 integration Add the new pad backlight mode control from MCC Change the default color for pads in red Add the no color param for pads to allow pad backlight deactivation Allow the user to stop the octave led blinking Matrixbrute : implemented sleep mode setting V 1.11.1 New Features Embedded KeyStep Pro firmware is now version 1.1.7 Added a "firmware update available" popup Fixes KeyStep Pro: Controller Map is no longer visible KeyStep Pro: Added option to change CV Pitch Bend Range KeyStep Pro: Removed Knob Mode option in Control mode section KeyStep Pro: Minor text changes V 1.11.0 New Features KeyStep Pro integration Fixes MatrixBrute : update pop-up message is now fixed Matrixbrute : regeneration does not oscillate anymore on some presets Progress bar now better reflect the real firmware loading progress V 1.10.1 New Features KeyLab Essential 88 integration Microfreak firmware 2.0.3 integration Added "Factory 2.0" presets bank for the Microfreak Added relative bend, scale, and root note settings for the Microfreak Updated embedded firmware versions for all products V 1.10.0 New Features Added MatrixBrute Factory 2.0 bank for MCC MatrixBrute 2.0 Firmware integration Catalina compatibility: Notarize macOs installer Added a modal popup when transfering preset or memories Improvements Various improvements for preset transfer and communication with devices V 1.9.1 New Features Updated embedded firmware versions for all products Add support and parameters for KeyStep firmware 1.1.0 V 1.9.0 New Features Microlab integration KeyLab MKII : added support of USB to CV out KeyLab MKII : added acceleration on knobs Keylab MKII : added support of MMC messages Keylab MKII : Midi notes can now be assigned to sustain, expression and auxiliary pedals Improvements Improved Firmware version detection for every device V1.8.1 New features Integration of Keylab88 MKII Fixes Fix MicroFreak Factory Bank 1.1 V1.8.0 New features Integration of Microfreak Integration of Arturia USB MIDI driver for Microfreak in Windows version, allows "multi-client" MIDI handling, for Microfreak only. Integration of 2 factory preset banks for the Microfreak Improvements Improved Firmware version detection for every device Fixes MatrixBrute : Presets name, type, and characteristics can now be edited in device's area MatrixBrute : No more failure when renaming projects Matrixbrute : Interval between projects now follows scroll position properly V1.7.5 Fixes Updated embedded firmware versions for all products Various Typos corrections V 1.7.4 New Features DrumBrute Impact added to the list of devices V 1.7.3 New Features KeyLab mkII added to the list of devices MCC will recall the previous display size on reopening Fixes MatrixBrute : Factory project is now well displayed on osx 10.13 V 1.7.1 New Features Integration of MiniBrute 2 & MiniBrute 2S V 1.7.0 New Features Integration of Keylab Essential Integration of BeatStep Pro 2.0 Integration of MiniBrute Integration of MicroBrute MiniLab mk2 firmware update now expects later releases Uninstall from ASC Manual is accessible from the MCC Fixes Various BeatStep Pro fixes MIDI Console now shows events even when Sync is off Various MIDI Console fixes V 1.6.2 New Features MatrixBrute : Added VCO 1 & 2 CV 0v Offset MatrixBrute : Added Lower Part MIDI Channel MatrixBrute : Improved Sync Clock In/Out Settings Fixes MatrixBrute : Preset info properly loaded when selecting MatrixBrute in the list of devices V 1.6.1 New Features Drumbrute : added Roller/Looper section Improvements Improve tooltip message when Sync not available Failed to open device : a better workflow/popup is now provided Fixes Drumbrute : "All" has been removed from global midi channel V 1.6.0 New Features MatrixBrute added to the list of devices Fixes Updated Minilab MK2 firmware for offline update V 1.5.1 Fixes MIDI Control Center properly handles firmware updates when the computer is offline V 1.5.0 - Minilab-mkII New Features Minilab MkII added to the list of devices Fixes After a firmware update, MCC displays properly device settings No more crashes if drumbrute is disconnected while transferring data V 1.4.0 - DrumBrute New Features DrumBrute added to the list of devices Fixes Improved memory handling for MiniLab - Sync or Working Memory manipulations created issues Updated BeatStep firmware for offline update Devices are now not editable when in firmware update mode It is now possible to read the connected device's firmware version after an update of the MCC V 1.3.2 Fixes Beatstep : wrong embedded FW V 1.3.1 New Features Keystep : add courbe "soft" for aftertouch issue Keystep : set popup to update fw if version smaller Keystep : update fw reboot message Fixes Auto-Update : Updater tool is missing mouseUp/mouseDrag bad handled on Mac BeatStep Pro : update FW indicator issue Keylab 88 : missing value for pad velocity curve Keylab 88 : Snap button as KBD memory - memory number default value is wrong V 1.3.0 - KeyStep New Features KeyStep added to the list of devices KeyLab88 : velocity curves Fixes BeatStep pro : Crash when editing step Importing device settings, impossible to find the file to import User template(s) missing 's' Button configuration no more available Limit zoom out in piano roll and drum roll V 1.2.2 New Features BeatStep pro : Add Wait To Load Pattern function Fixes BeatStep pro : wrong global settings at opening BeatStep pro : Wrong param id Seq2 Hz/V 1V MIDI Note BeatStep pro : New factory preset (MIDI&USB, Wait to load ON, Pas to Midi Channel USER) BeatStep pro : "Device not connected" pop up when BSP not connected V 1.2.1 Fixes BeatStep pro : Remove Sync feature on BSP Update FW recalling update popup BeatStep pro : set drum map range to [0,127] BeatStep pro : inversion Seq1 Gate et Seq 2 Pitch KeyLab 88 : update (transpose, bank MSB for pads, sustain pedal threshold) Minimal Required version popup : 1.1.0.4 for KL88, 1.1.2.0 for BSP V 1.2.0 - BeatStepPro New Features Auto-Update MCC Automatic download of latest firmware HW Test interface BeatStepPro support : piano roll support bulks partial transfert of parameters from computer to device device global parameters V 1.1.0 - BeatStep New Features BeatStep support. Edit your sequences and user scales directly in the MIDI Control Center. V 1.0.1 Fixes Mac 10.9 and Windows 8: Some devices were not properly seen as connected or the communication failed. If you experienced this bug on Mac 10.9, you might have to open Audio MIDI Setup and remove the MIDI Devices that had this problem.
10.10+	Midi Control Center	19-Nov-2021	67.9 Mb	1.13.5.1	MIDI Control Center V 1.13.5 New Features KeyLab MKII: Embedded firmware is now version 1.3.1 V 1.13.4 New Features KeyLab MKII: Added Global Velocity curve in the Keyboard and Device Settings KeyLab MKII: Added Custom Velocity curve in the Device Settings Fixes MicroFreak : Audio files are now properly converted into wavetables V 1.13.3 New Features MicroFreak : Added a “Wavetables” panel for User Wavetables management MicroFreak : Added a “New presets 4.0” bank of 64 presets made for firmware 4.0.1 MicroFreak : Added a factory bank of wavetables in “Wavetables” Panel MicroFreak : Import any WAV or AIFF wavetable or audio file to convert it into User Wavetable MicroFreak : Support for drag and drop of Audio Files from computer to both “Computer” and “Microfreak” areas. MicroFreak : Integration of Firmware 4.0.1 Features (Oct LED Blink + Osc knob speed) V 1.13.2 New Features MatrixBrute : Embedded firmware is now version 2.0.0 Improvements Fix USB Crash V 1.13.1 New Features KeyStep Pro: Embedded firmware is now version 2.0.0 V 1.13.0 New Features MicroFreak : Firmware 3.0.6 integration MicroFreak : Added 128 preset slots in MicroFreak MicroFreak : Preset bank "Factory 3.0", with Vocoder presets on slots 304 to 320 Improvements MCC does not crash anymore when performing recall from KLE MicroFreak : improved preset transfer speed Various MicroFreak fixes Updated warning message when sending a bank to MicroFreak V 1.12.1 New Features KeyLab MKII: FW 1.2.4 support All Devices: Minor firmware upgrades bugfixes V 1.12.0 New Features KeyStep 37 integration V 1.11.5 New Features KeyStep Pro: Embedded firmware is now version 1.3.2 V 1.11.4 New Features KeyStep Pro: Embedded firmware is now version 1.3.1 KeyStep Pro: Add option to set Mod Wheel CV MOD Source KeyStep Pro: Add support for setting a Track output MIDI channel per project V 1.11.3 New Features MicroFreak : Added support for Firmware 2.1.3 (Vocoder Edition), compatible with all MicroFreak units MicroFreak : Added "Factory 2.1" bank of 224 presets , with Vocoder presets on slots 208 to 224 Updated embedded Firmware version for MicroFreak V 1.11.2 Improvements Minilab MKII 1.1.2.1166 integration Add the new pad backlight mode control from MCC Change the default color for pads in red Add the no color param for pads to allow pad backlight deactivation Allow the user to stop the octave led blinking Matrixbrute : implemented sleep mode setting V 1.11.1 New Features Embedded KeyStep Pro firmware is now version 1.1.7 Added a "firmware update available" popup Fixes KeyStep Pro: Controller Map is no longer visible KeyStep Pro: Added option to change CV Pitch Bend Range KeyStep Pro: Removed Knob Mode option in Control mode section KeyStep Pro: Minor text changes V 1.11.0 New Features KeyStep Pro integration Fixes MatrixBrute : update pop-up message is now fixed Matrixbrute : regeneration does not oscillate anymore on some presets Progress bar now better reflect the real firmware loading progress V 1.10.1 New Features KeyLab Essential 88 integration Microfreak firmware 2.0.3 integration Added "Factory 2.0" presets bank for the Microfreak Added relative bend, scale, and root note settings for the Microfreak Updated embedded firmware versions for all products V 1.10.0 New Features Added MatrixBrute Factory 2.0 bank for MCC MatrixBrute 2.0 Firmware integration Catalina compatibility: Notarize macOs installer Added a modal popup when transfering preset or memories Improvements Various improvements for preset transfer and communication with devices V 1.9.1 New Features Updated embedded firmware versions for all products Add support and parameters for KeyStep firmware 1.1.0 V 1.9.0 New Features Microlab integration KeyLab MKII : added support of USB to CV out KeyLab MKII : added acceleration on knobs Keylab MKII : added support of MMC messages Keylab MKII : Midi notes can now be assigned to sustain, expression and auxiliary pedals Improvements Improved Firmware version detection for every device V1.8.1 New features Integration of Keylab88 MKII Fixes Fix MicroFreak Factory Bank 1.1 V1.8.0 New features Integration of Microfreak Integration of Arturia USB MIDI driver for Microfreak in Windows version, allows "multi-client" MIDI handling, for Microfreak only. Integration of 2 factory preset banks for the Microfreak Improvements Improved Firmware version detection for every device Fixes MatrixBrute : Presets name, type, and characteristics can now be edited in device's area MatrixBrute : No more failure when renaming projects Matrixbrute : Interval between projects now follows scroll position properly V1.7.5 Fixes Updated embedded firmware versions for all products Various Typos corrections V 1.7.4 New Features DrumBrute Impact added to the list of devices V 1.7.3 New Features KeyLab mkII added to the list of devices MCC will recall the previous display size on reopening Fixes MatrixBrute : Factory project is now well displayed on osx 10.13 V 1.7.1 New Features Integration of MiniBrute 2 & MiniBrute 2S V 1.7.0 New Features Integration of Keylab Essential Integration of BeatStep Pro 2.0 Integration of MiniBrute Integration of MicroBrute MiniLab mk2 firmware update now expects later releases Uninstall from ASC Manual is accessible from the MCC Fixes Various BeatStep Pro fixes MIDI Console now shows events even when Sync is off Various MIDI Console fixes V 1.6.2 New Features MatrixBrute : Added VCO 1 & 2 CV 0v Offset MatrixBrute : Added Lower Part MIDI Channel MatrixBrute : Improved Sync Clock In/Out Settings Fixes MatrixBrute : Preset info properly loaded when selecting MatrixBrute in the list of devices V 1.6.1 New Features Drumbrute : added Roller/Looper section Improvements Improve tooltip message when Sync not available Failed to open device : a better workflow/popup is now provided Fixes Drumbrute : "All" has been removed from global midi channel V 1.6.0 New Features MatrixBrute added to the list of devices Fixes Updated Minilab MK2 firmware for offline update V 1.5.1 Fixes MIDI Control Center properly handles firmware updates when the computer is offline V 1.5.0 - Minilab-mkII New Features Minilab MkII added to the list of devices Fixes After a firmware update, MCC displays properly device settings No more crashes if drumbrute is disconnected while transferring data V 1.4.0 - DrumBrute New Features DrumBrute added to the list of devices Fixes Improved memory handling for MiniLab - Sync or Working Memory manipulations created issues Updated BeatStep firmware for offline update Devices are now not editable when in firmware update mode It is now possible to read the connected device's firmware version after an update of the MCC V 1.3.2 Fixes Beatstep : wrong embedded FW V 1.3.1 New Features Keystep : add courbe "soft" for aftertouch issue Keystep : set popup to update fw if version smaller Keystep : update fw reboot message Fixes Auto-Update : Updater tool is missing mouseUp/mouseDrag bad handled on Mac BeatStep Pro : update FW indicator issue Keylab 88 : missing value for pad velocity curve Keylab 88 : Snap button as KBD memory - memory number default value is wrong V 1.3.0 - KeyStep New Features KeyStep added to the list of devices KeyLab88 : velocity curves Fixes BeatStep pro : Crash when editing step Importing device settings, impossible to find the file to import User template(s) missing 's' Button configuration no more available Limit zoom out in piano roll and drum roll V 1.2.2 New Features BeatStep pro : Add Wait To Load Pattern function Fixes BeatStep pro : wrong global settings at opening BeatStep pro : Wrong param id Seq2 Hz/V 1V MIDI Note BeatStep pro : New factory preset (MIDI&USB, Wait to load ON, Pas to Midi Channel USER) BeatStep pro : "Device not connected" pop up when BSP not connected V 1.2.1 Fixes BeatStep pro : Remove Sync feature on BSP Update FW recalling update popup BeatStep pro : set drum map range to [0,127] BeatStep pro : inversion Seq1 Gate et Seq 2 Pitch KeyLab 88 : update (transpose, bank MSB for pads, sustain pedal threshold) Minimal Required version popup : 1.1.0.4 for KL88, 1.1.2.0 for BSP V 1.2.0 - BeatStepPro New Features Auto-Update MCC Automatic download of latest firmware HW Test interface BeatStepPro support : piano roll support bulks partial transfert of parameters from computer to device device global parameters V 1.1.0 - BeatStep New Features BeatStep support. Edit your sequences and user scales directly in the MIDI Control Center. V 1.0.1 Fixes Mac 10.9 and Windows 8: Some devices were not properly seen as connected or the communication failed. If you experienced this bug on Mac 10.9, you might have to open Audio MIDI Setup and remove the MIDI Devices that had this problem.
Win 7+	Midi Control Center	19-Nov-2021	59.2 Mb	1.13.5.1	MIDI Control Center V 1.13.5 New Features KeyLab MKII: Embedded firmware is now version 1.3.1 V 1.13.4 New Features KeyLab MKII: Added Global Velocity curve in the Keyboard and Device Settings KeyLab MKII: Added Custom Velocity curve in the Device Settings Fixes MicroFreak : Audio files are now properly converted into wavetables V 1.13.3 New Features MicroFreak : Added a “Wavetables” panel for User Wavetables management MicroFreak : Added a “New presets 4.0” bank of 64 presets made for firmware 4.0.1 MicroFreak : Added a factory bank of wavetables in “Wavetables” Panel MicroFreak : Import any WAV or AIFF wavetable or audio file to convert it into User Wavetable MicroFreak : Support for drag and drop of Audio Files from computer to both “Computer” and “Microfreak” areas. MicroFreak : Integration of Firmware 4.0.1 Features (Oct LED Blink + Osc knob speed) V 1.13.2 New Features MatrixBrute : Embedded firmware is now version 2.0.0 Improvements Fix USB Crash V 1.13.1 New Features KeyStep Pro: Embedded firmware is now version 2.0.0 V 1.13.0 New Features MicroFreak : Firmware 3.0.6 integration MicroFreak : Added 128 preset slots in MicroFreak MicroFreak : Preset bank "Factory 3.0", with Vocoder presets on slots 304 to 320 Improvements MCC does not crash anymore when performing recall from KLE MicroFreak : improved preset transfer speed Various MicroFreak fixes Updated warning message when sending a bank to MicroFreak V 1.12.1 New Features KeyLab MKII: FW 1.2.4 support All Devices: Minor firmware upgrades bugfixes V 1.12.0 New Features KeyStep 37 integration V 1.11.5 New Features KeyStep Pro: Embedded firmware is now version 1.3.2 V 1.11.4 New Features KeyStep Pro: Embedded firmware is now version 1.3.1 KeyStep Pro: Add option to set Mod Wheel CV MOD Source KeyStep Pro: Add support for setting a Track output MIDI channel per project V 1.11.3 New Features MicroFreak : Added support for Firmware 2.1.3 (Vocoder Edition), compatible with all MicroFreak units MicroFreak : Added "Factory 2.1" bank of 224 presets , with Vocoder presets on slots 208 to 224 Updated embedded Firmware version for MicroFreak V 1.11.2 Improvements Minilab MKII 1.1.2.1166 integration Add the new pad backlight mode control from MCC Change the default color for pads in red Add the no color param for pads to allow pad backlight deactivation Allow the user to stop the octave led blinking Matrixbrute : implemented sleep mode setting V 1.11.1 New Features Embedded KeyStep Pro firmware is now version 1.1.7 Added a "firmware update available" popup Fixes KeyStep Pro: Controller Map is no longer visible KeyStep Pro: Added option to change CV Pitch Bend Range KeyStep Pro: Removed Knob Mode option in Control mode section KeyStep Pro: Minor text changes V 1.11.0 New Features KeyStep Pro integration Fixes MatrixBrute : update pop-up message is now fixed Matrixbrute : regeneration does not oscillate anymore on some presets Progress bar now better reflect the real firmware loading progress V 1.10.1 New Features KeyLab Essential 88 integration Microfreak firmware 2.0.3 integration Added "Factory 2.0" presets bank for the Microfreak Added relative bend, scale, and root note settings for the Microfreak Updated embedded firmware versions for all products V 1.10.0 New Features Added MatrixBrute Factory 2.0 bank for MCC MatrixBrute 2.0 Firmware integration Catalina compatibility: Notarize macOs installer Added a modal popup when transfering preset or memories Improvements Various improvements for preset transfer and communication with devices V 1.9.1 New Features Updated embedded firmware versions for all products Add support and parameters for KeyStep firmware 1.1.0 V 1.9.0 New Features Microlab integration KeyLab MKII : added support of USB to CV out KeyLab MKII : added acceleration on knobs Keylab MKII : added support of MMC messages Keylab MKII : Midi notes can now be assigned to sustain, expression and auxiliary pedals Improvements Improved Firmware version detection for every device V1.8.1 New features Integration of Keylab88 MKII Fixes Fix MicroFreak Factory Bank 1.1 V1.8.0 New features Integration of Microfreak Integration of Arturia USB MIDI driver for Microfreak in Windows version, allows "multi-client" MIDI handling, for Microfreak only. Integration of 2 factory preset banks for the Microfreak Improvements Improved Firmware version detection for every device Fixes MatrixBrute : Presets name, type, and characteristics can now be edited in device's area MatrixBrute : No more failure when renaming projects Matrixbrute : Interval between projects now follows scroll position properly V1.7.5 Fixes Updated embedded firmware versions for all products Various Typos corrections V 1.7.4 New Features DrumBrute Impact added to the list of devices V 1.7.3 New Features KeyLab mkII added to the list of devices MCC will recall the previous display size on reopening Fixes MatrixBrute : Factory project is now well displayed on osx 10.13 V 1.7.1 New Features Integration of MiniBrute 2 & MiniBrute 2S V 1.7.0 New Features Integration of Keylab Essential Integration of BeatStep Pro 2.0 Integration of MiniBrute Integration of MicroBrute MiniLab mk2 firmware update now expects later releases Uninstall from ASC Manual is accessible from the MCC Fixes Various BeatStep Pro fixes MIDI Console now shows events even when Sync is off Various MIDI Console fixes V 1.6.2 New Features MatrixBrute : Added VCO 1 & 2 CV 0v Offset MatrixBrute : Added Lower Part MIDI Channel MatrixBrute : Improved Sync Clock In/Out Settings Fixes MatrixBrute : Preset info properly loaded when selecting MatrixBrute in the list of devices V 1.6.1 New Features Drumbrute : added Roller/Looper section Improvements Improve tooltip message when Sync not available Failed to open device : a better workflow/popup is now provided Fixes Drumbrute : "All" has been removed from global midi channel V 1.6.0 New Features MatrixBrute added to the list of devices Fixes Updated Minilab MK2 firmware for offline update V 1.5.1 Fixes MIDI Control Center properly handles firmware updates when the computer is offline V 1.5.0 - Minilab-mkII New Features Minilab MkII added to the list of devices Fixes After a firmware update, MCC displays properly device settings No more crashes if drumbrute is disconnected while transferring data V 1.4.0 - DrumBrute New Features DrumBrute added to the list of devices Fixes Improved memory handling for MiniLab - Sync or Working Memory manipulations created issues Updated BeatStep firmware for offline update Devices are now not editable when in firmware update mode It is now possible to read the connected device's firmware version after an update of the MCC V 1.3.2 Fixes Beatstep : wrong embedded FW V 1.3.1 New Features Keystep : add courbe "soft" for aftertouch issue Keystep : set popup to update fw if version smaller Keystep : update fw reboot message Fixes Auto-Update : Updater tool is missing mouseUp/mouseDrag bad handled on Mac BeatStep Pro : update FW indicator issue Keylab 88 : missing value for pad velocity curve Keylab 88 : Snap button as KBD memory - memory number default value is wrong V 1.3.0 - KeyStep New Features KeyStep added to the list of devices KeyLab88 : velocity curves Fixes BeatStep pro : Crash when editing step Importing device settings, impossible to find the file to import User template(s) missing 's' Button configuration no more available Limit zoom out in piano roll and drum roll V 1.2.2 New Features BeatStep pro : Add Wait To Load Pattern function Fixes BeatStep pro : wrong global settings at opening BeatStep pro : Wrong param id Seq2 Hz/V 1V MIDI Note BeatStep pro : New factory preset (MIDI&USB, Wait to load ON, Pas to Midi Channel USER) BeatStep pro : "Device not connected" pop up when BSP not connected V 1.2.1 Fixes BeatStep pro : Remove Sync feature on BSP Update FW recalling update popup BeatStep pro : set drum map range to [0,127] BeatStep pro : inversion Seq1 Gate et Seq 2 Pitch KeyLab 88 : update (transpose, bank MSB for pads, sustain pedal threshold) Minimal Required version popup : 1.1.0.4 for KL88, 1.1.2.0 for BSP V 1.2.0 - BeatStepPro New Features Auto-Update MCC Automatic download of latest firmware HW Test interface BeatStepPro support : piano roll support bulks partial transfert of parameters from computer to device device global parameters V 1.1.0 - BeatStep New Features BeatStep support. Edit your sequences and user scales directly in the MIDI Control Center. V 1.0.1 Fixes Mac 10.9 and Windows 8: Some devices were not properly seen as connected or the communication failed. If you experienced this bug on Mac 10.9, you might have to open Audio MIDI Setup and remove the MIDI Devices that had this problem.
10.10+	Midi Control Center	04-Nov-2021	67.9 Mb	1.13.4.40	MIDI Control Center V 1.13.4 New Features KeyLab MKII: Added Global Velocity curve in the Keyboard and Device Settings KeyLab MKII: Added Custom Velocity curve in the Device Settings Fixes MicroFreak : Audio files are now properly converted into wavetables V 1.13.3 New Features MicroFreak : Added a “Wavetables” panel for User Wavetables management MicroFreak : Added a “New presets 4.0” bank of 64 presets made for firmware 4.0.1 MicroFreak : Added a factory bank of wavetables in “Wavetables” Panel MicroFreak : Import any WAV or AIFF wavetable or audio file to convert it into User Wavetable MicroFreak : Support for drag and drop of Audio Files from computer to both “Computer” and “Microfreak” areas. MicroFreak : Integration of Firmware 4.0.1 Features (Oct LED Blink + Osc knob speed) V 1.13.2 New Features MatrixBrute : Embedded firmware is now version 2.0.0 Improvements Fix USB Crash V 1.13.1 New Features KeyStep Pro: Embedded firmware is now version 2.0.0 V 1.13.0 New Features MicroFreak : Firmware 3.0.6 integration MicroFreak : Added 128 preset slots in MicroFreak MicroFreak : Preset bank "Factory 3.0", with Vocoder presets on slots 304 to 320 Improvements MCC does not crash anymore when performing recall from KLE MicroFreak : improved preset transfer speed Various MicroFreak fixes Updated warning message when sending a bank to MicroFreak V 1.12.1 New Features KeyLab MKII: FW 1.2.4 support All Devices: Minor firmware upgrades bugfixes V 1.12.0 New Features KeyStep 37 integration V 1.11.5 New Features KeyStep Pro: Embedded firmware is now version 1.3.2 V 1.11.4 New Features KeyStep Pro: Embedded firmware is now version 1.3.1 KeyStep Pro: Add option to set Mod Wheel CV MOD Source KeyStep Pro: Add support for setting a Track output MIDI channel per project V 1.11.3 New Features MicroFreak : Added support for Firmware 2.1.3 (Vocoder Edition), compatible with all MicroFreak units MicroFreak : Added "Factory 2.1" bank of 224 presets , with Vocoder presets on slots 208 to 224 Updated embedded Firmware version for MicroFreak V 1.11.2 Improvements Minilab MKII 1.1.2.1166 integration Add the new pad backlight mode control from MCC Change the default color for pads in red Add the no color param for pads to allow pad backlight deactivation Allow the user to stop the octave led blinking Matrixbrute : implemented sleep mode setting V 1.11.1 New Features Embedded KeyStep Pro firmware is now version 1.1.7 Added a "firmware update available" popup Fixes KeyStep Pro: Controller Map is no longer visible KeyStep Pro: Added option to change CV Pitch Bend Range KeyStep Pro: Removed Knob Mode option in Control mode section KeyStep Pro: Minor text changes V 1.11.0 New Features KeyStep Pro integration Fixes MatrixBrute : update pop-up message is now fixed Matrixbrute : regeneration does not oscillate anymore on some presets Progress bar now better reflect the real firmware loading progress V 1.10.1 New Features KeyLab Essential 88 integration Microfreak firmware 2.0.3 integration Added "Factory 2.0" presets bank for the Microfreak Added relative bend, scale, and root note settings for the Microfreak Updated embedded firmware versions for all products V 1.10.0 New Features Added MatrixBrute Factory 2.0 bank for MCC MatrixBrute 2.0 Firmware integration Catalina compatibility: Notarize macOs installer Added a modal popup when transfering preset or memories Improvements Various improvements for preset transfer and communication with devices V 1.9.1 New Features Updated embedded firmware versions for all products Add support and parameters for KeyStep firmware 1.1.0 V 1.9.0 New Features Microlab integration KeyLab MKII : added support of USB to CV out KeyLab MKII : added acceleration on knobs Keylab MKII : added support of MMC messages Keylab MKII : Midi notes can now be assigned to sustain, expression and auxiliary pedals Improvements Improved Firmware version detection for every device V1.8.1 New features Integration of Keylab88 MKII Fixes Fix MicroFreak Factory Bank 1.1 V1.8.0 New features Integration of Microfreak Integration of Arturia USB MIDI driver for Microfreak in Windows version, allows "multi-client" MIDI handling, for Microfreak only. Integration of 2 factory preset banks for the Microfreak Improvements Improved Firmware version detection for every device Fixes MatrixBrute : Presets name, type, and characteristics can now be edited in device's area MatrixBrute : No more failure when renaming projects Matrixbrute : Interval between projects now follows scroll position properly V1.7.5 Fixes Updated embedded firmware versions for all products Various Typos corrections V 1.7.4 New Features DrumBrute Impact added to the list of devices V 1.7.3 New Features KeyLab mkII added to the list of devices MCC will recall the previous display size on reopening Fixes MatrixBrute : Factory project is now well displayed on osx 10.13 V 1.7.1 New Features Integration of MiniBrute 2 & MiniBrute 2S V 1.7.0 New Features Integration of Keylab Essential Integration of BeatStep Pro 2.0 Integration of MiniBrute Integration of MicroBrute MiniLab mk2 firmware update now expects later releases Uninstall from ASC Manual is accessible from the MCC Fixes Various BeatStep Pro fixes MIDI Console now shows events even when Sync is off Various MIDI Console fixes V 1.6.2 New Features MatrixBrute : Added VCO 1 & 2 CV 0v Offset MatrixBrute : Added Lower Part MIDI Channel MatrixBrute : Improved Sync Clock In/Out Settings Fixes MatrixBrute : Preset info properly loaded when selecting MatrixBrute in the list of devices V 1.6.1 New Features Drumbrute : added Roller/Looper section Improvements Improve tooltip message when Sync not available Failed to open device : a better workflow/popup is now provided Fixes Drumbrute : "All" has been removed from global midi channel V 1.6.0 New Features MatrixBrute added to the list of devices Fixes Updated Minilab MK2 firmware for offline update V 1.5.1 Fixes MIDI Control Center properly handles firmware updates when the computer is offline V 1.5.0 - Minilab-mkII New Features Minilab MkII added to the list of devices Fixes After a firmware update, MCC displays properly device settings No more crashes if drumbrute is disconnected while transferring data V 1.4.0 - DrumBrute New Features DrumBrute added to the list of devices Fixes Improved memory handling for MiniLab - Sync or Working Memory manipulations created issues Updated BeatStep firmware for offline update Devices are now not editable when in firmware update mode It is now possible to read the connected device's firmware version after an update of the MCC V 1.3.2 Fixes Beatstep : wrong embedded FW V 1.3.1 New Features Keystep : add courbe "soft" for aftertouch issue Keystep : set popup to update fw if version smaller Keystep : update fw reboot message Fixes Auto-Update : Updater tool is missing mouseUp/mouseDrag bad handled on Mac BeatStep Pro : update FW indicator issue Keylab 88 : missing value for pad velocity curve Keylab 88 : Snap button as KBD memory - memory number default value is wrong V 1.3.0 - KeyStep New Features KeyStep added to the list of devices KeyLab88 : velocity curves Fixes BeatStep pro : Crash when editing step Importing device settings, impossible to find the file to import User template(s) missing 's' Button configuration no more available Limit zoom out in piano roll and drum roll V 1.2.2 New Features BeatStep pro : Add Wait To Load Pattern function Fixes BeatStep pro : wrong global settings at opening BeatStep pro : Wrong param id Seq2 Hz/V 1V MIDI Note BeatStep pro : New factory preset (MIDI&USB, Wait to load ON, Pas to Midi Channel USER) BeatStep pro : "Device not connected" pop up when BSP not connected V 1.2.1 Fixes BeatStep pro : Remove Sync feature on BSP Update FW recalling update popup BeatStep pro : set drum map range to [0,127] BeatStep pro : inversion Seq1 Gate et Seq 2 Pitch KeyLab 88 : update (transpose, bank MSB for pads, sustain pedal threshold) Minimal Required version popup : 1.1.0.4 for KL88, 1.1.2.0 for BSP V 1.2.0 - BeatStepPro New Features Auto-Update MCC Automatic download of latest firmware HW Test interface BeatStepPro support : piano roll support bulks partial transfert of parameters from computer to device device global parameters V 1.1.0 - BeatStep New Features BeatStep support. Edit your sequences and user scales directly in the MIDI Control Center. V 1.0.1 Fixes Mac 10.9 and Windows 8: Some devices were not properly seen as connected or the communication failed. If you experienced this bug on Mac 10.9, you might have to open Audio MIDI Setup and remove the MIDI Devices that had this problem.
Win 7+	Midi Control Center	04-Nov-2021	59.1 Mb	1.13.4.40	MIDI Control Center V 1.13.4 New Features KeyLab MKII: Added Global Velocity curve in the Keyboard and Device Settings KeyLab MKII: Added Custom Velocity curve in the Device Settings Fixes MicroFreak : Audio files are now properly converted into wavetables V 1.13.3 New Features MicroFreak : Added a “Wavetables” panel for User Wavetables management MicroFreak : Added a “New presets 4.0” bank of 64 presets made for firmware 4.0.1 MicroFreak : Added a factory bank of wavetables in “Wavetables” Panel MicroFreak : Import any WAV or AIFF wavetable or audio file to convert it into User Wavetable MicroFreak : Support for drag and drop of Audio Files from computer to both “Computer” and “Microfreak” areas. MicroFreak : Integration of Firmware 4.0.1 Features (Oct LED Blink + Osc knob speed) V 1.13.2 New Features MatrixBrute : Embedded firmware is now version 2.0.0 Improvements Fix USB Crash V 1.13.1 New Features KeyStep Pro: Embedded firmware is now version 2.0.0 V 1.13.0 New Features MicroFreak : Firmware 3.0.6 integration MicroFreak : Added 128 preset slots in MicroFreak MicroFreak : Preset bank "Factory 3.0", with Vocoder presets on slots 304 to 320 Improvements MCC does not crash anymore when performing recall from KLE MicroFreak : improved preset transfer speed Various MicroFreak fixes Updated warning message when sending a bank to MicroFreak V 1.12.1 New Features KeyLab MKII: FW 1.2.4 support All Devices: Minor firmware upgrades bugfixes V 1.12.0 New Features KeyStep 37 integration V 1.11.5 New Features KeyStep Pro: Embedded firmware is now version 1.3.2 V 1.11.4 New Features KeyStep Pro: Embedded firmware is now version 1.3.1 KeyStep Pro: Add option to set Mod Wheel CV MOD Source KeyStep Pro: Add support for setting a Track output MIDI channel per project V 1.11.3 New Features MicroFreak : Added support for Firmware 2.1.3 (Vocoder Edition), compatible with all MicroFreak units MicroFreak : Added "Factory 2.1" bank of 224 presets , with Vocoder presets on slots 208 to 224 Updated embedded Firmware version for MicroFreak V 1.11.2 Improvements Minilab MKII 1.1.2.1166 integration Add the new pad backlight mode control from MCC Change the default color for pads in red Add the no color param for pads to allow pad backlight deactivation Allow the user to stop the octave led blinking Matrixbrute : implemented sleep mode setting V 1.11.1 New Features Embedded KeyStep Pro firmware is now version 1.1.7 Added a "firmware update available" popup Fixes KeyStep Pro: Controller Map is no longer visible KeyStep Pro: Added option to change CV Pitch Bend Range KeyStep Pro: Removed Knob Mode option in Control mode section KeyStep Pro: Minor text changes V 1.11.0 New Features KeyStep Pro integration Fixes MatrixBrute : update pop-up message is now fixed Matrixbrute : regeneration does not oscillate anymore on some presets Progress bar now better reflect the real firmware loading progress V 1.10.1 New Features KeyLab Essential 88 integration Microfreak firmware 2.0.3 integration Added "Factory 2.0" presets bank for the Microfreak Added relative bend, scale, and root note settings for the Microfreak Updated embedded firmware versions for all products V 1.10.0 New Features Added MatrixBrute Factory 2.0 bank for MCC MatrixBrute 2.0 Firmware integration Catalina compatibility: Notarize macOs installer Added a modal popup when transfering preset or memories Improvements Various improvements for preset transfer and communication with devices V 1.9.1 New Features Updated embedded firmware versions for all products Add support and parameters for KeyStep firmware 1.1.0 V 1.9.0 New Features Microlab integration KeyLab MKII : added support of USB to CV out KeyLab MKII : added acceleration on knobs Keylab MKII : added support of MMC messages Keylab MKII : Midi notes can now be assigned to sustain, expression and auxiliary pedals Improvements Improved Firmware version detection for every device V1.8.1 New features Integration of Keylab88 MKII Fixes Fix MicroFreak Factory Bank 1.1 V1.8.0 New features Integration of Microfreak Integration of Arturia USB MIDI driver for Microfreak in Windows version, allows "multi-client" MIDI handling, for Microfreak only. Integration of 2 factory preset banks for the Microfreak Improvements Improved Firmware version detection for every device Fixes MatrixBrute : Presets name, type, and characteristics can now be edited in device's area MatrixBrute : No more failure when renaming projects Matrixbrute : Interval between projects now follows scroll position properly V1.7.5 Fixes Updated embedded firmware versions for all products Various Typos corrections V 1.7.4 New Features DrumBrute Impact added to the list of devices V 1.7.3 New Features KeyLab mkII added to the list of devices MCC will recall the previous display size on reopening Fixes MatrixBrute : Factory project is now well displayed on osx 10.13 V 1.7.1 New Features Integration of MiniBrute 2 & MiniBrute 2S V 1.7.0 New Features Integration of Keylab Essential Integration of BeatStep Pro 2.0 Integration of MiniBrute Integration of MicroBrute MiniLab mk2 firmware update now expects later releases Uninstall from ASC Manual is accessible from the MCC Fixes Various BeatStep Pro fixes MIDI Console now shows events even when Sync is off Various MIDI Console fixes V 1.6.2 New Features MatrixBrute : Added VCO 1 & 2 CV 0v Offset MatrixBrute : Added Lower Part MIDI Channel MatrixBrute : Improved Sync Clock In/Out Settings Fixes MatrixBrute : Preset info properly loaded when selecting MatrixBrute in the list of devices V 1.6.1 New Features Drumbrute : added Roller/Looper section Improvements Improve tooltip message when Sync not available Failed to open device : a better workflow/popup is now provided Fixes Drumbrute : "All" has been removed from global midi channel V 1.6.0 New Features MatrixBrute added to the list of devices Fixes Updated Minilab MK2 firmware for offline update V 1.5.1 Fixes MIDI Control Center properly handles firmware updates when the computer is offline V 1.5.0 - Minilab-mkII New Features Minilab MkII added to the list of devices Fixes After a firmware update, MCC displays properly device settings No more crashes if drumbrute is disconnected while transferring data V 1.4.0 - DrumBrute New Features DrumBrute added to the list of devices Fixes Improved memory handling for MiniLab - Sync or Working Memory manipulations created issues Updated BeatStep firmware for offline update Devices are now not editable when in firmware update mode It is now possible to read the connected device's firmware version after an update of the MCC V 1.3.2 Fixes Beatstep : wrong embedded FW V 1.3.1 New Features Keystep : add courbe "soft" for aftertouch issue Keystep : set popup to update fw if version smaller Keystep : update fw reboot message Fixes Auto-Update : Updater tool is missing mouseUp/mouseDrag bad handled on Mac BeatStep Pro : update FW indicator issue Keylab 88 : missing value for pad velocity curve Keylab 88 : Snap button as KBD memory - memory number default value is wrong V 1.3.0 - KeyStep New Features KeyStep added to the list of devices KeyLab88 : velocity curves Fixes BeatStep pro : Crash when editing step Importing device settings, impossible to find the file to import User template(s) missing 's' Button configuration no more available Limit zoom out in piano roll and drum roll V 1.2.2 New Features BeatStep pro : Add Wait To Load Pattern function Fixes BeatStep pro : wrong global settings at opening BeatStep pro : Wrong param id Seq2 Hz/V 1V MIDI Note BeatStep pro : New factory preset (MIDI&USB, Wait to load ON, Pas to Midi Channel USER) BeatStep pro : "Device not connected" pop up when BSP not connected V 1.2.1 Fixes BeatStep pro : Remove Sync feature on BSP Update FW recalling update popup BeatStep pro : set drum map range to [0,127] BeatStep pro : inversion Seq1 Gate et Seq 2 Pitch KeyLab 88 : update (transpose, bank MSB for pads, sustain pedal threshold) Minimal Required version popup : 1.1.0.4 for KL88, 1.1.2.0 for BSP V 1.2.0 - BeatStepPro New Features Auto-Update MCC Automatic download of latest firmware HW Test interface BeatStepPro support : piano roll support bulks partial transfert of parameters from computer to device device global parameters V 1.1.0 - BeatStep New Features BeatStep support. Edit your sequences and user scales directly in the MIDI Control Center. V 1.0.1 Fixes Mac 10.9 and Windows 8: Some devices were not properly seen as connected or the communication failed. If you experienced this bug on Mac 10.9, you might have to open Audio MIDI Setup and remove the MIDI Devices that had this problem.
10.10+	Midi Control Center	21-Oct-2021	67.9 Mb	1.13.3.110	MIDI Control Center V 1.13.3 New Features MicroFreak : Added a “Wavetables” panel for User Wavetables management MicroFreak : Added a “New presets 4.0” bank of 64 presets made for firmware 4.0.1 MicroFreak : Added a factory bank of wavetables in “Wavetables” Panel MicroFreak : Import any WAV or AIFF wavetable or audio file to convert it into User Wavetable MicroFreak : Support for drag and drop of Audio Files from computer to both “Computer” and “Microfreak” areas. MicroFreak : Integration of Firmware 4.0.1 Features (Oct LED Blink + Osc knob speed) V 1.13.2 New Features MatrixBrute : Embedded firmware is now version 2.0.0 Improvements Fix USB Crash V 1.13.1 New Features KeyStep Pro: Embedded firmware is now version 2.0.0 V 1.13.0 New Features MicroFreak : Firmware 3.0.6 integration MicroFreak : Added 128 preset slots in MicroFreak MicroFreak : Preset bank "Factory 3.0", with Vocoder presets on slots 304 to 320 Improvements MCC does not crash anymore when performing recall from KLE MicroFreak : improved preset transfer speed Various MicroFreak fixes Updated warning message when sending a bank to MicroFreak V 1.12.1 New Features KeyLab MKII: FW 1.2.4 support All Devices: Minor firmware upgrades bugfixes V 1.12.0 New Features KeyStep 37 integration V 1.11.5 New Features KeyStep Pro: Embedded firmware is now version 1.3.2 V 1.11.4 New Features KeyStep Pro: Embedded firmware is now version 1.3.1 KeyStep Pro: Add option to set Mod Wheel CV MOD Source KeyStep Pro: Add support for setting a Track output MIDI channel per project V 1.11.3 New Features MicroFreak : Added support for Firmware 2.1.3 (Vocoder Edition), compatible with all MicroFreak units MicroFreak : Added "Factory 2.1" bank of 224 presets , with Vocoder presets on slots 208 to 224 Updated embedded Firmware version for MicroFreak V 1.11.2 Improvements Minilab MKII 1.1.2.
Win 7+	Midi Control Center	21-Oct-2021	59.1 Mb	1.13.3.110	MIDI Control Center V 1.13.3 New Features MicroFreak : Added a “Wavetables” panel for User Wavetables management MicroFreak : Added a “New presets 4.0” bank of 64 presets made for firmware 4.0.1 MicroFreak : Added a factory bank of wavetables in “Wavetables” Panel MicroFreak : Import any WAV or AIFF wavetable or audio file to convert it into User Wavetable MicroFreak : Support for drag and drop of Audio Files from computer to both “Computer” and “Microfreak” areas. MicroFreak : Integration of Firmware 4.0.1 Features (Oct LED Blink + Osc knob speed) V 1.13.2 New Features MatrixBrute : Embedded firmware is now version 2.0.0 Improvements Fix USB Crash V 1.13.1 New Features KeyStep Pro: Embedded firmware is now version 2.0.0 V 1.13.0 New Features MicroFreak : Firmware 3.0.6 integration MicroFreak : Added 128 preset slots in MicroFreak MicroFreak : Preset bank "Factory 3.0", with Vocoder presets on slots 304 to 320 Improvements MCC does not crash anymore when performing recall from KLE MicroFreak : improved preset transfer speed Various MicroFreak fixes Updated warning message when sending a bank to MicroFreak V 1.12.1 New Features KeyLab MKII: FW 1.2.4 support All Devices: Minor firmware upgrades bugfixes V 1.12.0 New Features KeyStep 37 integration V 1.11.5 New Features KeyStep Pro: Embedded firmware is now version 1.3.2 V 1.11.4 New Features KeyStep Pro: Embedded firmware is now version 1.3.1 KeyStep Pro: Add option to set Mod Wheel CV MOD Source KeyStep Pro: Add support for setting a Track output MIDI channel per project V 1.11.3 New Features MicroFreak : Added support for Firmware 2.1.3 (Vocoder Edition), compatible with all MicroFreak units MicroFreak : Added "Factory 2.1" bank of 224 presets , with Vocoder presets on slots 208 to 224 Updated embedded Firmware version for MicroFreak V 1.11.2 Improvements Minilab MKII 1.1.2.
10.10+	Midi Control Center	14-Jun-2021	66.6 Mb	1.13.2.1875	MIDI Control Center V 1.13.2 New Features MatrixBrute : Embedded firmware is now version 2.0.2 Improvements Fix USB Crash V 1.13.1 New Features KeyStep Pro: Embedded firmware is now version 2.0.0 V 1.13.0 New Features MicroFreak : Firmware 3.0.6 integration MicroFreak : Added 128 preset slots in MicroFreak MicroFreak : Preset bank "Factory 3.0", with Vocoder presets on slots 304 to 320 Improvements MCC does not crash anymore when performing recall from KLE MicroFreak : improved preset transfer speed Various MicroFreak fixes Updated warning message when sending a bank to MicroFreak V 1.12.1 New Features KeyLab MKII: FW 1.2.4 support All Devices: Minor firmware upgrades bugfixes V 1.12.0 New Features KeyStep 37 integration V 1.11.5 New Features KeyStep Pro: Embedded firmware is now version 1.3.2 V 1.11.4 New Features KeyStep Pro: Embedded firmware is now version 1.3.1 KeyStep Pro: Add option to set Mod Wheel CV MOD Source KeyStep Pro: Add support for setting a Track output MIDI channel per project V 1.11.3 New Features MicroFreak : Added support for Firmware 2.1.3 (Vocoder Edition), compatible with all MicroFreak units MicroFreak : Added "Factory 2.1" bank of 224 presets , with Vocoder presets on slots 208 to 224 Updated embedded Firmware version for MicroFreak V 1.11.2 Improvements Minilab MKII 1.1.2.1166 integration Add the new pad backlight mode control from MCC Change the default color for pads in red Add the no color param for pads to allow pad backlight deactivation Allow the user to stop the octave led blinking Matrixbrute : implemented sleep mode setting V 1.11.1 New Features Embedded KeyStep Pro firmware is now version 1.1.7 Added a "firmware update available" popup Fixes KeyStep Pro: Controller Map is no longer visible KeyStep Pro: Added option to change CV Pitch Bend Range KeyStep Pro: Removed Knob Mode option in Control mode section KeyStep Pro: Minor text changes V 1.11.0 New Features KeyStep Pro integration Fixes MatrixBrute : update pop-up message is now fixed Matrixbrute : regeneration does not oscillate anymore on some presets Progress bar now better reflect the real firmware loading progress V 1.10.1 New Features KeyLab Essential 88 integration Microfreak firmware 2.0.3 integration Added "Factory 2.0" presets bank for the Microfreak Added relative bend, scale, and root note settings for the Microfreak Updated embedded firmware versions for all products V 1.10.0 New Features Added MatrixBrute Factory 2.0 bank for MCC MatrixBrute 2.0 Firmware integration Catalina compatibility: Notarize macOs installer Added a modal popup when transfering preset or memories Improvements Various improvements for preset transfer and communication with devices V 1.9.1 New Features Updated embedded firmware versions for all products Add support and parameters for KeyStep firmware 1.1.0 V 1.9.0 New Features Microlab integration KeyLab MKII : added support of USB to CV out KeyLab MKII : added acceleration on knobs Keylab MKII : added support of MMC messages Keylab MKII : Midi notes can now be assigned to sustain, expression and auxiliary pedals Improvements Improved Firmware version detection for every device V1.8.1 New features Integration of Keylab88 MKII Fixes Fix MicroFreak Factory Bank 1.1 V1.8.0 New features Integration of Microfreak Integration of Arturia USB MIDI driver for Microfreak in Windows version, allows "multi-client" MIDI handling, for Microfreak only. Integration of 2 factory preset banks for the Microfreak Improvements Improved Firmware version detection for every device Fixes MatrixBrute : Presets name, type, and characteristics can now be edited in device's area MatrixBrute : No more failure when renaming projects Matrixbrute : Interval between projects now follows scroll position properly V1.7.5 Fixes Updated embedded firmware versions for all products Various Typos corrections V 1.7.4 New Features DrumBrute Impact added to the list of devices V 1.7.3 New Features KeyLab mkII added to the list of devices MCC will recall the previous display size on reopening Fixes MatrixBrute : Factory project is now well displayed on osx 10.13 V 1.7.1 New Features Integration of MiniBrute 2 & MiniBrute 2S V 1.7.0 New Features Integration of Keylab Essential Integration of BeatStep Pro 2.0 Integration of MiniBrute Integration of MicroBrute MiniLab mk2 firmware update now expects later releases Uninstall from ASC Manual is accessible from the MCC Fixes Various BeatStep Pro fixes MIDI Console now shows events even when Sync is off Various MIDI Console fixes V 1.6.2 New Features MatrixBrute : Added VCO 1 & 2 CV 0v Offset MatrixBrute : Added Lower Part MIDI Channel MatrixBrute : Improved Sync Clock In/Out Settings Fixes MatrixBrute : Preset info properly loaded when selecting MatrixBrute in the list of devices V 1.6.1 New Features Drumbrute : added Roller/Looper section Improvements Improve tooltip message when Sync not available Failed to open device : a better workflow/popup is now provided Fixes Drumbrute : "All" has been removed from global midi channel V 1.6.0 New Features MatrixBrute added to the list of devices Fixes Updated Minilab MK2 firmware for offline update V 1.5.1 Fixes MIDI Control Center properly handles firmware updates when the computer is offline V 1.5.0 - Minilab-mkII New Features Minilab MkII added to the list of devices Fixes After a firmware update, MCC displays properly device settings No more crashes if drumbrute is disconnected while transferring data V 1.4.0 - DrumBrute New Features DrumBrute added to the list of devices Fixes Improved memory handling for MiniLab - Sync or Working Memory manipulations created issues Updated BeatStep firmware for offline update Devices are now not editable when in firmware update mode It is now possible to read the connected device's firmware version after an update of the MCC V 1.3.2 Fixes Beatstep : wrong embedded FW V 1.3.1 New Features Keystep : add courbe "soft" for aftertouch issue Keystep : set popup to update fw if version smaller Keystep : update fw reboot message Fixes Auto-Update : Updater tool is missing mouseUp/mouseDrag bad handled on Mac BeatStep Pro : update FW indicator issue Keylab 88 : missing value for pad velocity curve Keylab 88 : Snap button as KBD memory - memory number default value is wrong V 1.3.0 - KeyStep New Features KeyStep added to the list of devices KeyLab88 : velocity curves Fixes BeatStep pro : Crash when editing step Importing device settings, impossible to find the file to import User template(s) missing 's' Button configuration no more available Limit zoom out in piano roll and drum roll V 1.2.2 New Features BeatStep pro : Add Wait To Load Pattern function Fixes BeatStep pro : wrong global settings at opening BeatStep pro : Wrong param id Seq2 Hz/V 1V MIDI Note BeatStep pro : New factory preset (MIDI&USB, Wait to load ON, Pas to Midi Channel USER) BeatStep pro : "Device not connected" pop up when BSP not connected V 1.2.1 Fixes BeatStep pro : Remove Sync feature on BSP Update FW recalling update popup BeatStep pro : set drum map range to [0,127] BeatStep pro : inversion Seq1 Gate et Seq 2 Pitch KeyLab 88 : update (transpose, bank MSB for pads, sustain pedal threshold) Minimal Required version popup : 1.1.0.4 for KL88, 1.1.2.0 for BSP V 1.2.0 - BeatStepPro New Features Auto-Update MCC Automatic download of latest firmware HW Test interface BeatStepPro support : piano roll support bulks partial transfert of parameters from computer to device device global parameters V 1.1.0 - BeatStep New Features BeatStep support. Edit your sequences and user scales directly in the MIDI Control Center. V 1.0.1 Fixes Mac 10.9 and Windows 8: Some devices were not properly seen as connected or the communication failed. If you experienced this bug on Mac 10.9, you might have to open Audio MIDI Setup and remove the MIDI Devices that had this problem.
Win 7+	Midi Control Center	14-Jun-2021	58.4 Mb	1.13.2.1875	MIDI Control Center V 1.13.2 New Features MatrixBrute : Embedded firmware is now version 2.0.2 Improvements Fix USB Crash V 1.13.1 New Features KeyStep Pro: Embedded firmware is now version 2.0.0 V 1.13.0 New Features MicroFreak : Firmware 3.0.6 integration MicroFreak : Added 128 preset slots in MicroFreak MicroFreak : Preset bank "Factory 3.0", with Vocoder presets on slots 304 to 320 Improvements MCC does not crash anymore when performing recall from KLE MicroFreak : improved preset transfer speed Various MicroFreak fixes Updated warning message when sending a bank to MicroFreak V 1.12.1 New Features KeyLab MKII: FW 1.2.4 support All Devices: Minor firmware upgrades bugfixes V 1.12.0 New Features KeyStep 37 integration V 1.11.5 New Features KeyStep Pro: Embedded firmware is now version 1.3.2 V 1.11.4 New Features KeyStep Pro: Embedded firmware is now version 1.3.1 KeyStep Pro: Add option to set Mod Wheel CV MOD Source KeyStep Pro: Add support for setting a Track output MIDI channel per project V 1.11.3 New Features MicroFreak : Added support for Firmware 2.1.3 (Vocoder Edition), compatible with all MicroFreak units MicroFreak : Added "Factory 2.1" bank of 224 presets , with Vocoder presets on slots 208 to 224 Updated embedded Firmware version for MicroFreak V 1.11.2 Improvements Minilab MKII 1.1.2.1166 integration Add the new pad backlight mode control from MCC Change the default color for pads in red Add the no color param for pads to allow pad backlight deactivation Allow the user to stop the octave led blinking Matrixbrute : implemented sleep mode setting V 1.11.1 New Features Embedded KeyStep Pro firmware is now version 1.1.7 Added a "firmware update available" popup Fixes KeyStep Pro: Controller Map is no longer visible KeyStep Pro: Added option to change CV Pitch Bend Range KeyStep Pro: Removed Knob Mode option in Control mode section KeyStep Pro: Minor text changes V 1.11.0 New Features KeyStep Pro integration Fixes MatrixBrute : update pop-up message is now fixed Matrixbrute : regeneration does not oscillate anymore on some presets Progress bar now better reflect the real firmware loading progress V 1.10.1 New Features KeyLab Essential 88 integration Microfreak firmware 2.0.3 integration Added "Factory 2.0" presets bank for the Microfreak Added relative bend, scale, and root note settings for the Microfreak Updated embedded firmware versions for all products V 1.10.0 New Features Added MatrixBrute Factory 2.0 bank for MCC MatrixBrute 2.0 Firmware integration Catalina compatibility: Notarize macOs installer Added a modal popup when transfering preset or memories Improvements Various improvements for preset transfer and communication with devices V 1.9.1 New Features Updated embedded firmware versions for all products Add support and parameters for KeyStep firmware 1.1.0 V 1.9.0 New Features Microlab integration KeyLab MKII : added support of USB to CV out KeyLab MKII : added acceleration on knobs Keylab MKII : added support of MMC messages Keylab MKII : Midi notes can now be assigned to sustain, expression and auxiliary pedals Improvements Improved Firmware version detection for every device V1.8.1 New features Integration of Keylab88 MKII Fixes Fix MicroFreak Factory Bank 1.1 V1.8.0 New features Integration of Microfreak Integration of Arturia USB MIDI driver for Microfreak in Windows version, allows "multi-client" MIDI handling, for Microfreak only. Integration of 2 factory preset banks for the Microfreak Improvements Improved Firmware version detection for every device Fixes MatrixBrute : Presets name, type, and characteristics can now be edited in device's area MatrixBrute : No more failure when renaming projects Matrixbrute : Interval between projects now follows scroll position properly V1.7.5 Fixes Updated embedded firmware versions for all products Various Typos corrections V 1.7.4 New Features DrumBrute Impact added to the list of devices V 1.7.3 New Features KeyLab mkII added to the list of devices MCC will recall the previous display size on reopening Fixes MatrixBrute : Factory project is now well displayed on osx 10.13 V 1.7.1 New Features Integration of MiniBrute 2 & MiniBrute 2S V 1.7.0 New Features Integration of Keylab Essential Integration of BeatStep Pro 2.0 Integration of MiniBrute Integration of MicroBrute MiniLab mk2 firmware update now expects later releases Uninstall from ASC Manual is accessible from the MCC Fixes Various BeatStep Pro fixes MIDI Console now shows events even when Sync is off Various MIDI Console fixes V 1.6.2 New Features MatrixBrute : Added VCO 1 & 2 CV 0v Offset MatrixBrute : Added Lower Part MIDI Channel MatrixBrute : Improved Sync Clock In/Out Settings Fixes MatrixBrute : Preset info properly loaded when selecting MatrixBrute in the list of devices V 1.6.1 New Features Drumbrute : added Roller/Looper section Improvements Improve tooltip message when Sync not available Failed to open device : a better workflow/popup is now provided Fixes Drumbrute : "All" has been removed from global midi channel V 1.6.0 New Features MatrixBrute added to the list of devices Fixes Updated Minilab MK2 firmware for offline update V 1.5.1 Fixes MIDI Control Center properly handles firmware updates when the computer is offline V 1.5.0 - Minilab-mkII New Features Minilab MkII added to the list of devices Fixes After a firmware update, MCC displays properly device settings No more crashes if drumbrute is disconnected while transferring data V 1.4.0 - DrumBrute New Features DrumBrute added to the list of devices Fixes Improved memory handling for MiniLab - Sync or Working Memory manipulations created issues Updated BeatStep firmware for offline update Devices are now not editable when in firmware update mode It is now possible to read the connected device's firmware version after an update of the MCC V 1.3.2 Fixes Beatstep : wrong embedded FW V 1.3.1 New Features Keystep : add courbe "soft" for aftertouch issue Keystep : set popup to update fw if version smaller Keystep : update fw reboot message Fixes Auto-Update : Updater tool is missing mouseUp/mouseDrag bad handled on Mac BeatStep Pro : update FW indicator issue Keylab 88 : missing value for pad velocity curve Keylab 88 : Snap button as KBD memory - memory number default value is wrong V 1.3.0 - KeyStep New Features KeyStep added to the list of devices KeyLab88 : velocity curves Fixes BeatStep pro : Crash when editing step Importing device settings, impossible to find the file to import User template(s) missing 's' Button configuration no more available Limit zoom out in piano roll and drum roll V 1.2.2 New Features BeatStep pro : Add Wait To Load Pattern function Fixes BeatStep pro : wrong global settings at opening BeatStep pro : Wrong param id Seq2 Hz/V 1V MIDI Note BeatStep pro : New factory preset (MIDI&USB, Wait to load ON, Pas to Midi Channel USER) BeatStep pro : "Device not connected" pop up when BSP not connected V 1.2.1 Fixes BeatStep pro : Remove Sync feature on BSP Update FW recalling update popup BeatStep pro : set drum map range to [0,127] BeatStep pro : inversion Seq1 Gate et Seq 2 Pitch KeyLab 88 : update (transpose, bank MSB for pads, sustain pedal threshold) Minimal Required version popup : 1.1.0.4 for KL88, 1.1.2.0 for BSP V 1.2.0 - BeatStepPro New Features Auto-Update MCC Automatic download of latest firmware HW Test interface BeatStepPro support : piano roll support bulks partial transfert of parameters from computer to device device global parameters V 1.1.0 - BeatStep New Features BeatStep support. Edit your sequences and user scales directly in the MIDI Control Center. V 1.0.1 Fixes Mac 10.9 and Windows 8: Some devices were not properly seen as connected or the communication failed. If you experienced this bug on Mac 10.9, you might have to open Audio MIDI Setup and remove the MIDI Devices that had this problem.
10.10+	Midi Control Center	05-May-2021	65.9 Mb	1.13.1.1844	MIDI Control Center V 1.13.0 New Features MicroFreak : Firmware 3.0.6 integration MicroFreak : Added 128 preset slots in MicroFreak MicroFreak : Preset bank "Factory 3.0", with Vocoder presets on slots 304 to 320 Improvements MCC does not crash anymore when performing recall from KLE MicroFreak : improved preset transfer speed Various MicroFreak fixes Updated warning message when sending a bank to MicroFreak V 1.12.1 New Features KeyLab MKII: FW 1.2.4 support All Devices: Minor firmware upgrades bugfixes V 1.12.0 New Features KeyStep 37 integration V 1.11.5 New Features KeyStep Pro: Embedded firmware is now version 1.3.2 V 1.11.4 New Features KeyStep Pro: Embedded firmware is now version 1.3.1 KeyStep Pro: Add option to set Mod Wheel CV MOD Source KeyStep Pro: Add support for setting a Track output MIDI channel per project V 1.11.3 New Features MicroFreak : Added support for Firmware 2.1.3 (Vocoder Edition), compatible with all MicroFreak units MicroFreak : Added "Factory 2.1" bank of 224 presets , with Vocoder presets on slots 208 to 224 Updated embedded Firmware version for MicroFreak V 1.11.2 Improvements Minilab MKII 1.1.2.1166 integration Add the new pad backlight mode control from MCC Change the default color for pads in red Add the no color param for pads to allow pad backlight deactivation Allow the user to stop the octave led blinking Matrixbrute : implemented sleep mode setting V 1.11.1 New Features Embedded KeyStep Pro firmware is now version 1.1.7 Added a "firmware update available" popup Fixes KeyStep Pro: Controller Map is no longer visible KeyStep Pro: Added option to change CV Pitch Bend Range KeyStep Pro: Removed Knob Mode option in Control mode section KeyStep Pro: Minor text changes V 1.11.0 New Features KeyStep Pro integration Fixes MatrixBrute : update pop-up message is now fixed Matrixbrute : regeneration does not oscillate anymore on some presets Progress bar now better reflect the real firmware loading progress V 1.10.1 New Features KeyLab Essential 88 integration Microfreak firmware 2.0.3 integration Added "Factory 2.0" presets bank for the Microfreak Added relative bend, scale, and root note settings for the Microfreak Updated embedded firmware versions for all products V 1.10.0 New Features Added MatrixBrute Factory 2.0 bank for MCC MatrixBrute 2.0 Firmware integration Catalina compatibility: Notarize macOs installer Added a modal popup when transfering preset or memories Improvements Various improvements for preset transfer and communication with devices V 1.9.1 New Features Updated embedded firmware versions for all products Add support and parameters for KeyStep firmware 1.1.0 V 1.9.0 New Features Microlab integration KeyLab MKII : added support of USB to CV out KeyLab MKII : added acceleration on knobs Keylab MKII : added support of MMC messages Keylab MKII : Midi notes can now be assigned to sustain, expression and auxiliary pedals Improvements Improved Firmware version detection for every device V1.8.1 New features Integration of Keylab88 MKII Fixes Fix MicroFreak Factory Bank 1.1 V1.8.0 New features Integration of Microfreak Integration of Arturia USB MIDI driver for Microfreak in Windows version, allows "multi-client" MIDI handling, for Microfreak only. Integration of 2 factory preset banks for the Microfreak Improvements Improved Firmware version detection for every device Fixes MatrixBrute : Presets name, type, and characteristics can now be edited in device's area MatrixBrute : No more failure when renaming projects Matrixbrute : Interval between projects now follows scroll position properly V1.7.5 Fixes Updated embedded firmware versions for all products Various Typos corrections V 1.7.4 New Features DrumBrute Impact added to the list of devices V 1.7.3 New Features KeyLab mkII added to the list of devices MCC will recall the previous display size on reopening Fixes MatrixBrute : Factory project is now well displayed on osx 10.13 V 1.7.1 New Features Integration of MiniBrute 2 & MiniBrute 2S V 1.7.0 New Features Integration of Keylab Essential Integration of BeatStep Pro 2.0 Integration of MiniBrute Integration of MicroBrute MiniLab mk2 firmware update now expects later releases Uninstall from ASC Manual is accessible from the MCC Fixes Various BeatStep Pro fixes MIDI Console now shows events even when Sync is off Various MIDI Console fixes V 1.6.2 New Features MatrixBrute : Added VCO 1 & 2 CV 0v Offset MatrixBrute : Added Lower Part MIDI Channel MatrixBrute : Improved Sync Clock In/Out Settings Fixes MatrixBrute : Preset info properly loaded when selecting MatrixBrute in the list of devices V 1.6.1 New Features Drumbrute : added Roller/Looper section Improvements Improve tooltip message when Sync not available Failed to open device : a better workflow/popup is now provided Fixes Drumbrute : "All" has been removed from global midi channel V 1.6.0 New Features MatrixBrute added to the list of devices Fixes Updated Minilab MK2 firmware for offline update V 1.5.1 Fixes MIDI Control Center properly handles firmware updates when the computer is offline V 1.5.0 - Minilab-mkII New Features Minilab MkII added to the list of devices Fixes After a firmware update, MCC displays properly device settings No more crashes if drumbrute is disconnected while transferring data V 1.4.0 - DrumBrute New Features DrumBrute added to the list of devices Fixes Improved memory handling for MiniLab - Sync or Working Memory manipulations created issues Updated BeatStep firmware for offline update Devices are now not editable when in firmware update mode It is now possible to read the connected device's firmware version after an update of the MCC V 1.3.2 Fixes Beatstep : wrong embedded FW V 1.3.1 New Features Keystep : add courbe "soft" for aftertouch issue Keystep : set popup to update fw if version smaller Keystep : update fw reboot message Fixes Auto-Update : Updater tool is missing mouseUp/mouseDrag bad handled on Mac BeatStep Pro : update FW indicator issue Keylab 88 : missing value for pad velocity curve Keylab 88 : Snap button as KBD memory - memory number default value is wrong V 1.3.0 - KeyStep New Features KeyStep added to the list of devices KeyLab88 : velocity curves Fixes BeatStep pro : Crash when editing step Importing device settings, impossible to find the file to import User template(s) missing 's' Button configuration no more available Limit zoom out in piano roll and drum roll V 1.2.2 New Features BeatStep pro : Add Wait To Load Pattern function Fixes BeatStep pro : wrong global settings at opening BeatStep pro : Wrong param id Seq2 Hz/V 1V MIDI Note BeatStep pro : New factory preset (MIDI&USB, Wait to load ON, Pas to Midi Channel USER) BeatStep pro : "Device not connected" pop up when BSP not connected V 1.2.1 Fixes BeatStep pro : Remove Sync feature on BSP Update FW recalling update popup BeatStep pro : set drum map range to [0,127] BeatStep pro : inversion Seq1 Gate et Seq 2 Pitch KeyLab 88 : update (transpose, bank MSB for pads, sustain pedal threshold) Minimal Required version popup : 1.1.0.4 for KL88, 1.1.2.0 for BSP V 1.2.0 - BeatStepPro New Features Auto-Update MCC Automatic download of latest firmware HW Test interface BeatStepPro support : piano roll support bulks partial transfert of parameters from computer to device device global parameters V 1.1.0 - BeatStep New Features BeatStep support. Edit your sequences and user scales directly in the MIDI Control Center. V 1.0.1 Fixes Mac 10.9 and Windows 8: Some devices were not properly seen as connected or the communication failed. If you experienced this bug on Mac 10.9, you might have to open Audio MIDI Setup and remove the MIDI Devices that had this problem.
Win 7+	Midi Control Center	05-May-2021	58.2 Mb	1.13.1.1844	MIDI Control Center V 1.13.0 New Features MicroFreak : Firmware 3.0.6 integration MicroFreak : Added 128 preset slots in MicroFreak MicroFreak : Preset bank "Factory 3.0", with Vocoder presets on slots 304 to 320 Improvements MCC does not crash anymore when performing recall from KLE MicroFreak : improved preset transfer speed Various MicroFreak fixes Updated warning message when sending a bank to MicroFreak V 1.12.1 New Features KeyLab MKII: FW 1.2.4 support All Devices: Minor firmware upgrades bugfixes V 1.12.0 New Features KeyStep 37 integration V 1.11.5 New Features KeyStep Pro: Embedded firmware is now version 1.3.2 V 1.11.4 New Features KeyStep Pro: Embedded firmware is now version 1.3.1 KeyStep Pro: Add option to set Mod Wheel CV MOD Source KeyStep Pro: Add support for setting a Track output MIDI channel per project V 1.11.3 New Features MicroFreak : Added support for Firmware 2.1.3 (Vocoder Edition), compatible with all MicroFreak units MicroFreak : Added "Factory 2.1" bank of 224 presets , with Vocoder presets on slots 208 to 224 Updated embedded Firmware version for MicroFreak V 1.11.2 Improvements Minilab MKII 1.1.2.1166 integration Add the new pad backlight mode control from MCC Change the default color for pads in red Add the no color param for pads to allow pad backlight deactivation Allow the user to stop the octave led blinking Matrixbrute : implemented sleep mode setting V 1.11.1 New Features Embedded KeyStep Pro firmware is now version 1.1.7 Added a "firmware update available" popup Fixes KeyStep Pro: Controller Map is no longer visible KeyStep Pro: Added option to change CV Pitch Bend Range KeyStep Pro: Removed Knob Mode option in Control mode section KeyStep Pro: Minor text changes V 1.11.0 New Features KeyStep Pro integration Fixes MatrixBrute : update pop-up message is now fixed Matrixbrute : regeneration does not oscillate anymore on some presets Progress bar now better reflect the real firmware loading progress V 1.10.1 New Features KeyLab Essential 88 integration Microfreak firmware 2.0.3 integration Added "Factory 2.0" presets bank for the Microfreak Added relative bend, scale, and root note settings for the Microfreak Updated embedded firmware versions for all products V 1.10.0 New Features Added MatrixBrute Factory 2.0 bank for MCC MatrixBrute 2.0 Firmware integration Catalina compatibility: Notarize macOs installer Added a modal popup when transfering preset or memories Improvements Various improvements for preset transfer and communication with devices V 1.9.1 New Features Updated embedded firmware versions for all products Add support and parameters for KeyStep firmware 1.1.0 V 1.9.0 New Features Microlab integration KeyLab MKII : added support of USB to CV out KeyLab MKII : added acceleration on knobs Keylab MKII : added support of MMC messages Keylab MKII : Midi notes can now be assigned to sustain, expression and auxiliary pedals Improvements Improved Firmware version detection for every device V1.8.1 New features Integration of Keylab88 MKII Fixes Fix MicroFreak Factory Bank 1.1 V1.8.0 New features Integration of Microfreak Integration of Arturia USB MIDI driver for Microfreak in Windows version, allows "multi-client" MIDI handling, for Microfreak only. Integration of 2 factory preset banks for the Microfreak Improvements Improved Firmware version detection for every device Fixes MatrixBrute : Presets name, type, and characteristics can now be edited in device's area MatrixBrute : No more failure when renaming projects Matrixbrute : Interval between projects now follows scroll position properly V1.7.5 Fixes Updated embedded firmware versions for all products Various Typos corrections V 1.7.4 New Features DrumBrute Impact added to the list of devices V 1.7.3 New Features KeyLab mkII added to the list of devices MCC will recall the previous display size on reopening Fixes MatrixBrute : Factory project is now well displayed on osx 10.13 V 1.7.1 New Features Integration of MiniBrute 2 & MiniBrute 2S V 1.7.0 New Features Integration of Keylab Essential Integration of BeatStep Pro 2.0 Integration of MiniBrute Integration of MicroBrute MiniLab mk2 firmware update now expects later releases Uninstall from ASC Manual is accessible from the MCC Fixes Various BeatStep Pro fixes MIDI Console now shows events even when Sync is off Various MIDI Console fixes V 1.6.2 New Features MatrixBrute : Added VCO 1 & 2 CV 0v Offset MatrixBrute : Added Lower Part MIDI Channel MatrixBrute : Improved Sync Clock In/Out Settings Fixes MatrixBrute : Preset info properly loaded when selecting MatrixBrute in the list of devices V 1.6.1 New Features Drumbrute : added Roller/Looper section Improvements Improve tooltip message when Sync not available Failed to open device : a better workflow/popup is now provided Fixes Drumbrute : "All" has been removed from global midi channel V 1.6.0 New Features MatrixBrute added to the list of devices Fixes Updated Minilab MK2 firmware for offline update V 1.5.1 Fixes MIDI Control Center properly handles firmware updates when the computer is offline V 1.5.0 - Minilab-mkII New Features Minilab MkII added to the list of devices Fixes After a firmware update, MCC displays properly device settings No more crashes if drumbrute is disconnected while transferring data V 1.4.0 - DrumBrute New Features DrumBrute added to the list of devices Fixes Improved memory handling for MiniLab - Sync or Working Memory manipulations created issues Updated BeatStep firmware for offline update Devices are now not editable when in firmware update mode It is now possible to read the connected device's firmware version after an update of the MCC V 1.3.2 Fixes Beatstep : wrong embedded FW V 1.3.1 New Features Keystep : add courbe "soft" for aftertouch issue Keystep : set popup to update fw if version smaller Keystep : update fw reboot message Fixes Auto-Update : Updater tool is missing mouseUp/mouseDrag bad handled on Mac BeatStep Pro : update FW indicator issue Keylab 88 : missing value for pad velocity curve Keylab 88 : Snap button as KBD memory - memory number default value is wrong V 1.3.0 - KeyStep New Features KeyStep added to the list of devices KeyLab88 : velocity curves Fixes BeatStep pro : Crash when editing step Importing device settings, impossible to find the file to import User template(s) missing 's' Button configuration no more available Limit zoom out in piano roll and drum roll V 1.2.2 New Features BeatStep pro : Add Wait To Load Pattern function Fixes BeatStep pro : wrong global settings at opening BeatStep pro : Wrong param id Seq2 Hz/V 1V MIDI Note BeatStep pro : New factory preset (MIDI&USB, Wait to load ON, Pas to Midi Channel USER) BeatStep pro : "Device not connected" pop up when BSP not connected V 1.2.1 Fixes BeatStep pro : Remove Sync feature on BSP Update FW recalling update popup BeatStep pro : set drum map range to [0,127] BeatStep pro : inversion Seq1 Gate et Seq 2 Pitch KeyLab 88 : update (transpose, bank MSB for pads, sustain pedal threshold) Minimal Required version popup : 1.1.0.4 for KL88, 1.1.2.0 for BSP V 1.2.0 - BeatStepPro New Features Auto-Update MCC Automatic download of latest firmware HW Test interface BeatStepPro support : piano roll support bulks partial transfert of parameters from computer to device device global parameters V 1.1.0 - BeatStep New Features BeatStep support. Edit your sequences and user scales directly in the MIDI Control Center. V 1.0.1 Fixes Mac 10.9 and Windows 8: Some devices were not properly seen as connected or the communication failed. If you experienced this bug on Mac 10.9, you might have to open Audio MIDI Setup and remove the MIDI Devices that had this problem.
10.10+	Midi Control Center	14-Jan-2021	37.4 Mb	1.13.0.75	MIDI Control Center V 1.13.0 New Features MicroFreak : Firmware 3.0.6 integration MicroFreak : Added 128 preset slots in MicroFreak MicroFreak : Preset bank "Factory 3.0", with Vocoder presets on slots 304 to 320 Improvements MCC does not crash anymore when performing recall from KLE MicroFreak : improved preset transfer speed Various MicroFreak fixes Updated warning message when sending a bank to MicroFreak V 1.12.1 New Features KeyLab MKII: FW 1.2.4 support All Devices: Minor firmware upgrades bugfixes V 1.12.0 New Features KeyStep 37 integration V 1.11.5 New Features KeyStep Pro: Embedded firmware is now version 1.3.2 V 1.11.4 New Features KeyStep Pro: Embedded firmware is now version 1.3.1 KeyStep Pro: Add option to set Mod Wheel CV MOD Source KeyStep Pro: Add support for setting a Track output MIDI channel per project V 1.11.3 New Features MicroFreak : Added support for Firmware 2.1.3 (Vocoder Edition), compatible with all MicroFreak units MicroFreak : Added "Factory 2.1" bank of 224 presets , with Vocoder presets on slots 208 to 224 Updated embedded Firmware version for MicroFreak V 1.11.2 Improvements Minilab MKII 1.1.2.1166 integration Add the new pad backlight mode control from MCC Change the default color for pads in red Add the no color param for pads to allow pad backlight deactivation Allow the user to stop the octave led blinking Matrixbrute : implemented sleep mode setting V 1.11.1 New Features Embedded KeyStep Pro firmware is now version 1.1.7 Added a "firmware update available" popup Fixes KeyStep Pro: Controller Map is no longer visible KeyStep Pro: Added option to change CV Pitch Bend Range KeyStep Pro: Removed Knob Mode option in Control mode section KeyStep Pro: Minor text changes V 1.11.0 New Features KeyStep Pro integration Fixes MatrixBrute : update pop-up message is now fixed Matrixbrute : regeneration does not oscillate anymore on some presets
Win 7+	Midi Control Center	14-Jan-2021	28.2 Mb	1.13.0.75	MIDI Control Center V 1.13.0 New Features MicroFreak : Firmware 3.0.6 integration MicroFreak : Added 128 preset slots in MicroFreak MicroFreak : Preset bank "Factory 3.0", with Vocoder presets on slots 304 to 320 Improvements MCC does not crash anymore when performing recall from KLE MicroFreak : improved preset transfer speed Various MicroFreak fixes Updated warning message when sending a bank to MicroFreak V 1.12.1 New Features KeyLab MKII: FW 1.2.4 support All Devices: Minor firmware upgrades bugfixes V 1.12.0 New Features KeyStep 37 integration V 1.11.5 New Features KeyStep Pro: Embedded firmware is now version 1.3.2 V 1.11.4 New Features KeyStep Pro: Embedded firmware is now version 1.3.1 KeyStep Pro: Add option to set Mod Wheel CV MOD Source KeyStep Pro: Add support for setting a Track output MIDI channel per project V 1.11.3 New Features MicroFreak : Added support for Firmware 2.1.3 (Vocoder Edition), compatible with all MicroFreak units MicroFreak : Added "Factory 2.1" bank of 224 presets , with Vocoder presets on slots 208 to 224 Updated embedded Firmware version for MicroFreak V 1.11.2 Improvements Minilab MKII 1.1.2.1166 integration Add the new pad backlight mode control from MCC Change the default color for pads in red Add the no color param for pads to allow pad backlight deactivation Allow the user to stop the octave led blinking Matrixbrute : implemented sleep mode setting V 1.11.1 New Features Embedded KeyStep Pro firmware is now version 1.1.7 Added a "firmware update available" popup Fixes KeyStep Pro: Controller Map is no longer visible KeyStep Pro: Added option to change CV Pitch Bend Range KeyStep Pro: Removed Knob Mode option in Control mode section KeyStep Pro: Minor text changes V 1.11.0 New Features KeyStep Pro integration Fixes MatrixBrute : update pop-up message is now fixed Matrixbrute : regeneration does not oscillate anymore on some presets
10.10+	Midi Control Center	07-Oct-2020	37.2 Mb	1.12.1.33	MIDI Control Center V 1.12.1 New Features KeyLab MKII: FW 1.2.4 support All Devices: Minor firmware upgrades bugfixes V 1.12.0 New Features KeyStep 37 integration V 1.11.5 New Features KeyStep Pro: Embedded firmware is now version 1.3.2 V 1.11.4 New Features KeyStep Pro: Embedded firmware is now version 1.3.1 KeyStep Pro: Add option to set Mod Wheel CV MOD Source KeyStep Pro: Add support for setting a Track output MIDI channel per project V 1.11.3 New Features MicroFreak : Added support for Firmware 2.1.3 (Vocoder Edition), compatible with all MicroFreak units MicroFreak : Added "Factory 2.1" bank of 224 presets , with Vocoder presets on slots 208 to 224 Updated embedded Firmware version for MicroFreak V 1.11.2 Improvements Minilab MKII 1.1.2.1166 integration Add the new pad backlight mode control from MCC Change the default color for pads in red Add the no color param for pads to allow pad backlight deactivation Allow the user to stop the octave led blinking Matrixbrute : implemented sleep mode setting V 1.11.1 New Features Embedded KeyStep Pro firmware is now version 1.1.7 Added a "firmware update available" popup Fixes KeyStep Pro: Controller Map is no longer visible KeyStep Pro: Added option to change CV Pitch Bend Range KeyStep Pro: Removed Knob Mode option in Control mode section KeyStep Pro: Minor text changes V 1.11.0 New Features KeyStep Pro integration Fixes MatrixBrute : update pop-up message is now fixed Matrixbrute : regeneration does not oscillate anymore on some presets Progress bar now better reflect the real firmware loading progress V 1.10.1 New Features KeyLab Essential 88 integration Microfreak firmware 2.0.3 integration Added "Factory 2.0" presets bank for the Microfreak Added relative bend, scale, and root note settings for the Microfreak Updated embedded firmware versions for all products V 1.10.0 New Features Added MatrixBrute Factory 2.0 bank for MCC MatrixBrute 2.0 Firmware integration Catalina compatibility: Notarize macOs installer Added a modal popup when transfering preset or memories Improvements Various improvements for preset transfer and communication with devices V 1.9.1 New Features Updated embedded firmware versions for all products Add support and parameters for KeyStep firmware 1.1.0 V 1.9.0 New Features Microlab integration KeyLab MKII : added support of USB to CV out KeyLab MKII : added acceleration on knobs Keylab MKII : added support of MMC messages Keylab MKII : Midi notes can now be assigned to sustain, expression and auxiliary pedals Improvements Improved Firmware version detection for every device V1.8.1 New features Integration of Keylab88 MKII Fixes Fix MicroFreak Factory Bank 1.1 V1.8.0 New features Integration of Microfreak Integration of Arturia USB MIDI driver for Microfreak in Windows version, allows "multi-client" MIDI handling, for Microfreak only. Integration of 2 factory preset banks for the Microfreak Improvements Improved Firmware version detection for every device Fixes MatrixBrute : Presets name, type, and characteristics can now be edited in device's area MatrixBrute : No more failure when renaming projects Matrixbrute : Interval between projects now follows scroll position properly V1.7.5 Fixes Updated embedded firmware versions for all products Various Typos corrections V 1.7.4 New Features DrumBrute Impact added to the list of devices V 1.7.3 New Features KeyLab mkII added to the list of devices MCC will recall the previous display size on reopening Fixes MatrixBrute : Factory project is now well displayed on osx 10.13 V 1.7.1 New Features Integration of MiniBrute 2 & MiniBrute 2S V 1.7.0 New Features Integration of Keylab Essential Integration of BeatStep Pro 2.0 Integration of MiniBrute Integration of MicroBrute MiniLab mk2 firmware update now expects later releases Uninstall from ASC Manual is accessible from the MCC Fixes Various BeatStep Pro fixes MIDI Console now shows events even when Sync is off Various MIDI Console fixes V 1.6.2 New Features MatrixBrute : Added VCO 1 & 2 CV 0v Offset MatrixBrute : Added Lower Part MIDI Channel MatrixBrute : Improved Sync Clock In/Out Settings Fixes MatrixBrute : Preset info properly loaded when selecting MatrixBrute in the list of devices V 1.6.1 New Features Drumbrute : added Roller/Looper section Improvements Improve tooltip message when Sync not available Failed to open device : a better workflow/popup is now provided Fixes Drumbrute : "All" has been removed from global midi channel V 1.6.0 New Features MatrixBrute added to the list of devices Fixes Updated Minilab MK2 firmware for offline update V 1.5.1 Fixes MIDI Control Center properly handles firmware updates when the computer is offline V 1.5.0 - Minilab-mkII New Features Minilab MkII added to the list of devices Fixes After a firmware update, MCC displays properly device settings No more crashes if drumbrute is disconnected while transferring data V 1.4.0 - DrumBrute New Features DrumBrute added to the list of devices Fixes Improved memory handling for MiniLab - Sync or Working Memory manipulations created issues Updated BeatStep firmware for offline update Devices are now not editable when in firmware update mode It is now possible to read the connected device's firmware version after an update of the MCC V 1.3.2 Fixes Beatstep : wrong embedded FW V 1.3.1 New Features Keystep : add courbe "soft" for aftertouch issue Keystep : set popup to update fw if version smaller Keystep : update fw reboot message Fixes Auto-Update : Updater tool is missing mouseUp/mouseDrag bad handled on Mac BeatStep Pro : update FW indicator issue Keylab 88 : missing value for pad velocity curve Keylab 88 : Snap button as KBD memory - memory number default value is wrong V 1.3.0 - KeyStep New Features KeyStep added to the list of devices KeyLab88 : velocity curves Fixes BeatStep pro : Crash when editing step Importing device settings, impossible to find the file to import User template(s) missing 's' Button configuration no more available Limit zoom out in piano roll and drum roll V 1.2.2 New Features BeatStep pro : Add Wait To Load Pattern function Fixes BeatStep pro : wrong global settings at opening BeatStep pro : Wrong param id Seq2 Hz/V 1V MIDI Note BeatStep pro : New factory preset (MIDI&USB, Wait to load ON, Pas to Midi Channel USER) BeatStep pro : "Device not connected" pop up when BSP not connected V 1.2.1 Fixes BeatStep pro : Remove Sync feature on BSP Update FW recalling update popup BeatStep pro : set drum map range to [0,127] BeatStep pro : inversion Seq1 Gate et Seq 2 Pitch KeyLab 88 : update (transpose, bank MSB for pads, sustain pedal threshold) Minimal Required version popup : 1.1.0.4 for KL88, 1.1.2.0 for BSP V 1.2.0 - BeatStepPro New Features Auto-Update MCC Automatic download of latest firmware HW Test interface BeatStepPro support : piano roll support bulks partial transfert of parameters from computer to device device global parameters V 1.1.0 - BeatStep New Features BeatStep support. Edit your sequences and user scales directly in the MIDI Control Center. V 1.0.1 Fixes Mac 10.9 and Windows 8: Some devices were not properly seen as connected or the communication failed. If you experienced this bug on Mac 10.9, you might have to open Audio MIDI Setup and remove the MIDI Devices that had this problem.
Win 7+	Midi Control Center	07-Oct-2020	28.1 Mb	1.12.1.33	MIDI Control Center V 1.12.1 New Features KeyLab MKII: FW 1.2.4 support All Devices: Minor firmware upgrades bugfixes V 1.12.0 New Features KeyStep 37 integration V 1.11.5 New Features KeyStep Pro: Embedded firmware is now version 1.3.2 V 1.11.4 New Features KeyStep Pro: Embedded firmware is now version 1.3.1 KeyStep Pro: Add option to set Mod Wheel CV MOD Source KeyStep Pro: Add support for setting a Track output MIDI channel per project V 1.11.3 New Features MicroFreak : Added support for Firmware 2.1.3 (Vocoder Edition), compatible with all MicroFreak units MicroFreak : Added "Factory 2.1" bank of 224 presets , with Vocoder presets on slots 208 to 224 Updated embedded Firmware version for MicroFreak V 1.11.2 Improvements Minilab MKII 1.1.2.1166 integration Add the new pad backlight mode control from MCC Change the default color for pads in red Add the no color param for pads to allow pad backlight deactivation Allow the user to stop the octave led blinking Matrixbrute : implemented sleep mode setting V 1.11.1 New Features Embedded KeyStep Pro firmware is now version 1.1.7 Added a "firmware update available" popup Fixes KeyStep Pro: Controller Map is no longer visible KeyStep Pro: Added option to change CV Pitch Bend Range KeyStep Pro: Removed Knob Mode option in Control mode section KeyStep Pro: Minor text changes V 1.11.0 New Features KeyStep Pro integration Fixes MatrixBrute : update pop-up message is now fixed Matrixbrute : regeneration does not oscillate anymore on some presets Progress bar now better reflect the real firmware loading progress V 1.10.1 New Features KeyLab Essential 88 integration Microfreak firmware 2.0.3 integration Added "Factory 2.0" presets bank for the Microfreak Added relative bend, scale, and root note settings for the Microfreak Updated embedded firmware versions for all products V 1.10.0 New Features Added MatrixBrute Factory 2.0 bank for MCC MatrixBrute 2.0 Firmware integration Catalina compatibility: Notarize macOs installer Added a modal popup when transfering preset or memories Improvements Various improvements for preset transfer and communication with devices V 1.9.1 New Features Updated embedded firmware versions for all products Add support and parameters for KeyStep firmware 1.1.0 V 1.9.0 New Features Microlab integration KeyLab MKII : added support of USB to CV out KeyLab MKII : added acceleration on knobs Keylab MKII : added support of MMC messages Keylab MKII : Midi notes can now be assigned to sustain, expression and auxiliary pedals Improvements Improved Firmware version detection for every device V1.8.1 New features Integration of Keylab88 MKII Fixes Fix MicroFreak Factory Bank 1.1 V1.8.0 New features Integration of Microfreak Integration of Arturia USB MIDI driver for Microfreak in Windows version, allows "multi-client" MIDI handling, for Microfreak only. Integration of 2 factory preset banks for the Microfreak Improvements Improved Firmware version detection for every device Fixes MatrixBrute : Presets name, type, and characteristics can now be edited in device's area MatrixBrute : No more failure when renaming projects Matrixbrute : Interval between projects now follows scroll position properly V1.7.5 Fixes Updated embedded firmware versions for all products Various Typos corrections V 1.7.4 New Features DrumBrute Impact added to the list of devices V 1.7.3 New Features KeyLab mkII added to the list of devices MCC will recall the previous display size on reopening Fixes MatrixBrute : Factory project is now well displayed on osx 10.13 V 1.7.1 New Features Integration of MiniBrute 2 & MiniBrute 2S V 1.7.0 New Features Integration of Keylab Essential Integration of BeatStep Pro 2.0 Integration of MiniBrute Integration of MicroBrute MiniLab mk2 firmware update now expects later releases Uninstall from ASC Manual is accessible from the MCC Fixes Various BeatStep Pro fixes MIDI Console now shows events even when Sync is off Various MIDI Console fixes V 1.6.2 New Features MatrixBrute : Added VCO 1 & 2 CV 0v Offset MatrixBrute : Added Lower Part MIDI Channel MatrixBrute : Improved Sync Clock In/Out Settings Fixes MatrixBrute : Preset info properly loaded when selecting MatrixBrute in the list of devices V 1.6.1 New Features Drumbrute : added Roller/Looper section Improvements Improve tooltip message when Sync not available Failed to open device : a better workflow/popup is now provided Fixes Drumbrute : "All" has been removed from global midi channel V 1.6.0 New Features MatrixBrute added to the list of devices Fixes Updated Minilab MK2 firmware for offline update V 1.5.1 Fixes MIDI Control Center properly handles firmware updates when the computer is offline V 1.5.0 - Minilab-mkII New Features Minilab MkII added to the list of devices Fixes After a firmware update, MCC displays properly device settings No more crashes if drumbrute is disconnected while transferring data V 1.4.0 - DrumBrute New Features DrumBrute added to the list of devices Fixes Improved memory handling for MiniLab - Sync or Working Memory manipulations created issues Updated BeatStep firmware for offline update Devices are now not editable when in firmware update mode It is now possible to read the connected device's firmware version after an update of the MCC V 1.3.2 Fixes Beatstep : wrong embedded FW V 1.3.1 New Features Keystep : add courbe "soft" for aftertouch issue Keystep : set popup to update fw if version smaller Keystep : update fw reboot message Fixes Auto-Update : Updater tool is missing mouseUp/mouseDrag bad handled on Mac BeatStep Pro : update FW indicator issue Keylab 88 : missing value for pad velocity curve Keylab 88 : Snap button as KBD memory - memory number default value is wrong V 1.3.0 - KeyStep New Features KeyStep added to the list of devices KeyLab88 : velocity curves Fixes BeatStep pro : Crash when editing step Importing device settings, impossible to find the file to import User template(s) missing 's' Button configuration no more available Limit zoom out in piano roll and drum roll V 1.2.2 New Features BeatStep pro : Add Wait To Load Pattern function Fixes BeatStep pro : wrong global settings at opening BeatStep pro : Wrong param id Seq2 Hz/V 1V MIDI Note BeatStep pro : New factory preset (MIDI&USB, Wait to load ON, Pas to Midi Channel USER) BeatStep pro : "Device not connected" pop up when BSP not connected V 1.2.1 Fixes BeatStep pro : Remove Sync feature on BSP Update FW recalling update popup BeatStep pro : set drum map range to [0,127] BeatStep pro : inversion Seq1 Gate et Seq 2 Pitch KeyLab 88 : update (transpose, bank MSB for pads, sustain pedal threshold) Minimal Required version popup : 1.1.0.4 for KL88, 1.1.2.0 for BSP V 1.2.0 - BeatStepPro New Features Auto-Update MCC Automatic download of latest firmware HW Test interface BeatStepPro support : piano roll support bulks partial transfert of parameters from computer to device device global parameters V 1.1.0 - BeatStep New Features BeatStep support. Edit your sequences and user scales directly in the MIDI Control Center. V 1.0.1 Fixes Mac 10.9 and Windows 8: Some devices were not properly seen as connected or the communication failed. If you experienced this bug on Mac 10.9, you might have to open Audio MIDI Setup and remove the MIDI Devices that had this problem.
10.10+	Midi Control Center	07-Sep-2020	37.2 Mb	1.12.0.1679	MIDI Control Center V 1.12.0 New Features KeyStep 37 integration V 1.11.5 New Features KeyStep Pro: Embedded firmware is now version 1.3.2 V 1.11.4 New Features KeyStep Pro: Embedded firmware is now version 1.3.1 KeyStep Pro: Add option to set Mod Wheel CV MOD Source KeyStep Pro: Add support for setting a Track output MIDI channel per project V 1.11.3 New Features MicroFreak : Added support for Firmware 2.1.3 (Vocoder Edition), compatible with all MicroFreak units MicroFreak : Added "Factory 2.1" bank of 224 presets , with Vocoder presets on slots 208 to 224 Updated embedded Firmware version for MicroFreak V 1.11.2 Improvements Minilab MKII 1.1.2.1166 integration Add the new pad backlight mode control from MCC Change the default color for pads in red Add the no color param for pads to allow pad backlight deactivation Allow the user to stop the octave led blinking Matrixbrute : implemented sleep mode setting V 1.11.1 New Features Embedded KeyStep Pro firmware is now version 1.1.7 Added a "firmware update available" popup Fixes KeyStep Pro: Controller Map is no longer visible KeyStep Pro: Added option to change CV Pitch Bend Range KeyStep Pro: Removed Knob Mode option in Control mode section KeyStep Pro: Minor text changes V 1.11.0 New Features KeyStep Pro integration Fixes MatrixBrute : update pop-up message is now fixed Matrixbrute : regeneration does not oscillate anymore on some presets Progress bar now better reflect the real firmware loading progress V 1.10.1 New Features KeyLab Essential 88 integration Microfreak firmware 2.0.3 integration Added "Factory 2.0" presets bank for the Microfreak Added relative bend, scale, and root note settings for the Microfreak Updated embedded firmware versions for all products V 1.10.0 New Features Added MatrixBrute Factory 2.0 bank for MCC MatrixBrute 2.0 Firmware integration Catalina compatibility: Notarize macOs installer Added a modal popup when transfering preset or memories Improvements Various improvements for preset transfer and communication with devices V 1.9.1 New Features Updated embedded firmware versions for all products Add support and parameters for KeyStep firmware 1.1.0 V 1.9.0 New Features Microlab integration KeyLab MKII : added support of USB to CV out KeyLab MKII : added acceleration on knobs Keylab MKII : added support of MMC messages Keylab MKII : Midi notes can now be assigned to sustain, expression and auxiliary pedals Improvements Improved Firmware version detection for every device V1.8.1 New features Integration of Keylab88 MKII Fixes Fix MicroFreak Factory Bank 1.1 V1.8.0 New features Integration of Microfreak Integration of Arturia USB MIDI driver for Microfreak in Windows version, allows "multi-client" MIDI handling, for Microfreak only. Integration of 2 factory preset banks for the Microfreak Improvements Improved Firmware version detection for every device Fixes MatrixBrute : Presets name, type, and characteristics can now be edited in device's area MatrixBrute : No more failure when renaming projects Matrixbrute : Interval between projects now follows scroll position properly V1.7.5 Fixes Updated embedded firmware versions for all products Various Typos corrections V 1.7.4 New Features DrumBrute Impact added to the list of devices V 1.7.3 New Features KeyLab mkII added to the list of devices MCC will recall the previous display size on reopening Fixes MatrixBrute : Factory project is now well displayed on osx 10.13 V 1.7.1 New Features Integration of MiniBrute 2 & MiniBrute 2S V 1.7.0 New Features Integration of Keylab Essential Integration of BeatStep Pro 2.0 Integration of MiniBrute Integration of MicroBrute MiniLab mk2 firmware update now expects later releases Uninstall from ASC Manual is accessible from the MCC Fixes Various BeatStep Pro fixes MIDI Console now shows events even when Sync is off Various MIDI Console fixes V 1.6.2 New Features MatrixBrute : Added VCO 1 & 2 CV 0v Offset MatrixBrute : Added Lower Part MIDI Channel MatrixBrute : Improved Sync Clock In/Out Settings Fixes MatrixBrute : Preset info properly loaded when selecting MatrixBrute in the list of devices V 1.6.1 New Features Drumbrute : added Roller/Looper section Improvements Improve tooltip message when Sync not available Failed to open device : a better workflow/popup is now provided Fixes Drumbrute : "All" has been removed from global midi channel V 1.6.0 New Features MatrixBrute added to the list of devices Fixes Updated Minilab MK2 firmware for offline update V 1.5.1 Fixes MIDI Control Center properly handles firmware updates when the computer is offline V 1.5.0 - Minilab-mkII New Features Minilab MkII added to the list of devices Fixes After a firmware update, MCC displays properly device settings No more crashes if drumbrute is disconnected while transferring data V 1.4.0 - DrumBrute New Features DrumBrute added to the list of devices Fixes Improved memory handling for MiniLab - Sync or Working Memory manipulations created issues Updated BeatStep firmware for offline update Devices are now not editable when in firmware update mode It is now possible to read the connected device's firmware version after an update of the MCC V 1.3.2 Fixes Beatstep : wrong embedded FW V 1.3.1 New Features Keystep : add courbe "soft" for aftertouch issue Keystep : set popup to update fw if version smaller Keystep : update fw reboot message Fixes Auto-Update : Updater tool is missing mouseUp/mouseDrag bad handled on Mac BeatStep Pro : update FW indicator issue Keylab 88 : missing value for pad velocity curve Keylab 88 : Snap button as KBD memory - memory number default value is wrong V 1.3.0 - KeyStep New Features KeyStep added to the list of devices KeyLab88 : velocity curves Fixes BeatStep pro : Crash when editing step Importing device settings, impossible to find the file to import User template(s) missing 's' Button configuration no more available Limit zoom out in piano roll and drum roll V 1.2.2 New Features BeatStep pro : Add Wait To Load Pattern function Fixes BeatStep pro : wrong global settings at opening BeatStep pro : Wrong param id Seq2 Hz/V 1V MIDI Note BeatStep pro : New factory preset (MIDI&USB, Wait to load ON, Pas to Midi Channel USER) BeatStep pro : "Device not connected" pop up when BSP not connected V 1.2.1 Fixes BeatStep pro : Remove Sync feature on BSP Update FW recalling update popup BeatStep pro : set drum map range to [0,127] BeatStep pro : inversion Seq1 Gate et Seq 2 Pitch KeyLab 88 : update (transpose, bank MSB for pads, sustain pedal threshold) Minimal Required version popup : 1.1.0.4 for KL88, 1.1.2.0 for BSP V 1.2.0 - BeatStepPro New Features Auto-Update MCC Automatic download of latest firmware HW Test interface BeatStepPro support : piano roll support bulks partial transfert of parameters from computer to device device global parameters V 1.1.0 - BeatStep New Features BeatStep support. Edit your sequences and user scales directly in the MIDI Control Center. V 1.0.1 Fixes Mac 10.9 and Windows 8: Some devices were not properly seen as connected or the communication failed. If you experienced this bug on Mac 10.9, you might have to open Audio MIDI Setup and remove the MIDI Devices that had this problem.
Win 7+	Midi Control Center	07-Sep-2020	28.1 Mb	1.12.0.1679	MIDI Control Center V 1.12.0 New Features KeyStep 37 integration V 1.11.5 New Features KeyStep Pro: Embedded firmware is now version 1.3.2 V 1.11.4 New Features KeyStep Pro: Embedded firmware is now version 1.3.1 KeyStep Pro: Add option to set Mod Wheel CV MOD Source KeyStep Pro: Add support for setting a Track output MIDI channel per project V 1.11.3 New Features MicroFreak : Added support for Firmware 2.1.3 (Vocoder Edition), compatible with all MicroFreak units MicroFreak : Added "Factory 2.1" bank of 224 presets , with Vocoder presets on slots 208 to 224 Updated embedded Firmware version for MicroFreak V 1.11.2 Improvements Minilab MKII 1.1.2.1166 integration Add the new pad backlight mode control from MCC Change the default color for pads in red Add the no color param for pads to allow pad backlight deactivation Allow the user to stop the octave led blinking Matrixbrute : implemented sleep mode setting V 1.11.1 New Features Embedded KeyStep Pro firmware is now version 1.1.7 Added a "firmware update available" popup Fixes KeyStep Pro: Controller Map is no longer visible KeyStep Pro: Added option to change CV Pitch Bend Range KeyStep Pro: Removed Knob Mode option in Control mode section KeyStep Pro: Minor text changes V 1.11.0 New Features KeyStep Pro integration Fixes MatrixBrute : update pop-up message is now fixed Matrixbrute : regeneration does not oscillate anymore on some presets Progress bar now better reflect the real firmware loading progress V 1.10.1 New Features KeyLab Essential 88 integration Microfreak firmware 2.0.3 integration Added "Factory 2.0" presets bank for the Microfreak Added relative bend, scale, and root note settings for the Microfreak Updated embedded firmware versions for all products V 1.10.0 New Features Added MatrixBrute Factory 2.0 bank for MCC MatrixBrute 2.0 Firmware integration Catalina compatibility: Notarize macOs installer Added a modal popup when transfering preset or memories Improvements Various improvements for preset transfer and communication with devices V 1.9.1 New Features Updated embedded firmware versions for all products Add support and parameters for KeyStep firmware 1.1.0 V 1.9.0 New Features Microlab integration KeyLab MKII : added support of USB to CV out KeyLab MKII : added acceleration on knobs Keylab MKII : added support of MMC messages Keylab MKII : Midi notes can now be assigned to sustain, expression and auxiliary pedals Improvements Improved Firmware version detection for every device V1.8.1 New features Integration of Keylab88 MKII Fixes Fix MicroFreak Factory Bank 1.1 V1.8.0 New features Integration of Microfreak Integration of Arturia USB MIDI driver for Microfreak in Windows version, allows "multi-client" MIDI handling, for Microfreak only. Integration of 2 factory preset banks for the Microfreak Improvements Improved Firmware version detection for every device Fixes MatrixBrute : Presets name, type, and characteristics can now be edited in device's area MatrixBrute : No more failure when renaming projects Matrixbrute : Interval between projects now follows scroll position properly V1.7.5 Fixes Updated embedded firmware versions for all products Various Typos corrections V 1.7.4 New Features DrumBrute Impact added to the list of devices V 1.7.3 New Features KeyLab mkII added to the list of devices MCC will recall the previous display size on reopening Fixes MatrixBrute : Factory project is now well displayed on osx 10.13 V 1.7.1 New Features Integration of MiniBrute 2 & MiniBrute 2S V 1.7.0 New Features Integration of Keylab Essential Integration of BeatStep Pro 2.0 Integration of MiniBrute Integration of MicroBrute MiniLab mk2 firmware update now expects later releases Uninstall from ASC Manual is accessible from the MCC Fixes Various BeatStep Pro fixes MIDI Console now shows events even when Sync is off Various MIDI Console fixes V 1.6.2 New Features MatrixBrute : Added VCO 1 & 2 CV 0v Offset MatrixBrute : Added Lower Part MIDI Channel MatrixBrute : Improved Sync Clock In/Out Settings Fixes MatrixBrute : Preset info properly loaded when selecting MatrixBrute in the list of devices V 1.6.1 New Features Drumbrute : added Roller/Looper section Improvements Improve tooltip message when Sync not available Failed to open device : a better workflow/popup is now provided Fixes Drumbrute : "All" has been removed from global midi channel V 1.6.0 New Features MatrixBrute added to the list of devices Fixes Updated Minilab MK2 firmware for offline update V 1.5.1 Fixes MIDI Control Center properly handles firmware updates when the computer is offline V 1.5.0 - Minilab-mkII New Features Minilab MkII added to the list of devices Fixes After a firmware update, MCC displays properly device settings No more crashes if drumbrute is disconnected while transferring data V 1.4.0 - DrumBrute New Features DrumBrute added to the list of devices Fixes Improved memory handling for MiniLab - Sync or Working Memory manipulations created issues Updated BeatStep firmware for offline update Devices are now not editable when in firmware update mode It is now possible to read the connected device's firmware version after an update of the MCC V 1.3.2 Fixes Beatstep : wrong embedded FW V 1.3.1 New Features Keystep : add courbe "soft" for aftertouch issue Keystep : set popup to update fw if version smaller Keystep : update fw reboot message Fixes Auto-Update : Updater tool is missing mouseUp/mouseDrag bad handled on Mac BeatStep Pro : update FW indicator issue Keylab 88 : missing value for pad velocity curve Keylab 88 : Snap button as KBD memory - memory number default value is wrong V 1.3.0 - KeyStep New Features KeyStep added to the list of devices KeyLab88 : velocity curves Fixes BeatStep pro : Crash when editing step Importing device settings, impossible to find the file to import User template(s) missing 's' Button configuration no more available Limit zoom out in piano roll and drum roll V 1.2.2 New Features BeatStep pro : Add Wait To Load Pattern function Fixes BeatStep pro : wrong global settings at opening BeatStep pro : Wrong param id Seq2 Hz/V 1V MIDI Note BeatStep pro : New factory preset (MIDI&USB, Wait to load ON, Pas to Midi Channel USER) BeatStep pro : "Device not connected" pop up when BSP not connected V 1.2.1 Fixes BeatStep pro : Remove Sync feature on BSP Update FW recalling update popup BeatStep pro : set drum map range to [0,127] BeatStep pro : inversion Seq1 Gate et Seq 2 Pitch KeyLab 88 : update (transpose, bank MSB for pads, sustain pedal threshold) Minimal Required version popup : 1.1.0.4 for KL88, 1.1.2.0 for BSP V 1.2.0 - BeatStepPro New Features Auto-Update MCC Automatic download of latest firmware HW Test interface BeatStepPro support : piano roll support bulks partial transfert of parameters from computer to device device global parameters V 1.1.0 - BeatStep New Features BeatStep support. Edit your sequences and user scales directly in the MIDI Control Center. V 1.0.1 Fixes Mac 10.9 and Windows 8: Some devices were not properly seen as connected or the communication failed. If you experienced this bug on Mac 10.9, you might have to open Audio MIDI Setup and remove the MIDI Devices that had this problem.
Win 7+	Midi Control Center	03-Sep-2020	27.4 Mb	1.11.5.1661	MIDI Control Center V 1.11.5 New Features KeyStep Pro: Embedded firmware is now version 1.3.2 V 1.11.4 New Features KeyStep Pro: Embedded firmware is now version 1.3.1 KeyStep Pro: Add option to set Mod Wheel CV MOD Source KeyStep Pro: Add support for setting a Track output MIDI channel per project V 1.11.3 New Features MicroFreak : Added support for Firmware 2.1.3 (Vocoder Edition), compatible with all MicroFreak units MicroFreak : Added "Factory 2.1" bank of 224 presets , with Vocoder presets on slots 208 to 224 Updated embedded Firmware version for MicroFreak V 1.11.2 Improvements Minilab MKII 1.1.2.1166 integration Add the new pad backlight mode control from MCC Change the default color for pads in red Add the no color param for pads to allow pad backlight deactivation Allow the user to stop the octave led blinking Matrixbrute : implemented sleep mode setting V 1.11.1 New Features Embedded KeyStep Pro firmware is now version 1.1.7 Added a "firmware update available" popup Fixes KeyStep Pro: Controller Map is no longer visible KeyStep Pro: Added option to change CV Pitch Bend Range KeyStep Pro: Removed Knob Mode option in Control mode section KeyStep Pro: Minor text changes V 1.11.0 New Features KeyStep Pro integration Fixes MatrixBrute : update pop-up message is now fixed Matrixbrute : regeneration does not oscillate anymore on some presets Progress bar now better reflect the real firmware loading progress V 1.10.1 New Features KeyLab Essential 88 integration Microfreak firmware 2.0.3 integration Added "Factory 2.0" presets bank for the Microfreak Added relative bend, scale, and root note settings for the Microfreak Updated embedded firmware versions for all products V 1.10.0 New Features Added MatrixBrute Factory 2.0 bank for MCC MatrixBrute 2.0 Firmware integration Catalina compatibility: Notarize macOs installer Added a modal popup when transfering preset or memories Improvements Various improvements for preset transfer and communication with devices V 1.9.1 New Features Updated embedded firmware versions for all products Add support and parameters for KeyStep firmware 1.1.0 V 1.9.0 New Features Microlab integration KeyLab MKII : added support of USB to CV out KeyLab MKII : added acceleration on knobs Keylab MKII : added support of MMC messages Keylab MKII : Midi notes can now be assigned to sustain, expression and auxiliary pedals Improvements Improved Firmware version detection for every device V1.8.1 New features Integration of Keylab88 MKII Fixes Fix MicroFreak Factory Bank 1.1 V1.8.0 New features Integration of Microfreak Integration of Arturia USB MIDI driver for Microfreak in Windows version, allows "multi-client" MIDI handling, for Microfreak only. Integration of 2 factory preset banks for the Microfreak Improvements Improved Firmware version detection for every device Fixes MatrixBrute : Presets name, type, and characteristics can now be edited in device's area MatrixBrute : No more failure when renaming projects Matrixbrute : Interval between projects now follows scroll position properly V1.7.5 Fixes Updated embedded firmware versions for all products Various Typos corrections V 1.7.4 New Features DrumBrute Impact added to the list of devices V 1.7.3 New Features KeyLab mkII added to the list of devices MCC will recall the previous display size on reopening Fixes MatrixBrute : Factory project is now well displayed on osx 10.13 V 1.7.1 New Features Integration of MiniBrute 2 & MiniBrute 2S V 1.7.0 New Features Integration of Keylab Essential Integration of BeatStep Pro 2.0 Integration of MiniBrute Integration of MicroBrute MiniLab mk2 firmware update now expects later releases Uninstall from ASC Manual is accessible from the MCC Fixes Various BeatStep Pro fixes MIDI Console now shows events even when Sync is off Various MIDI Console fixes V 1.6.2 New Features MatrixBrute : Added VCO 1 & 2 CV 0v Offset MatrixBrute : Added Lower Part MIDI Channel MatrixBrute : Improved Sync Clock In/Out Settings Fixes MatrixBrute : Preset info properly loaded when selecting MatrixBrute in the list of devices V 1.6.1 New Features Drumbrute : added Roller/Looper section Improvements Improve tooltip message when Sync not available Failed to open device : a better workflow/popup is now provided Fixes Drumbrute : "All" has been removed from global midi channel V 1.6.0 New Features MatrixBrute added to the list of devices Fixes Updated Minilab MK2 firmware for offline update V 1.5.1 Fixes MIDI Control Center properly handles firmware updates when the computer is offline V 1.5.0 - Minilab-mkII New Features Minilab MkII added to the list of devices Fixes After a firmware update, MCC displays properly device settings No more crashes if drumbrute is disconnected while transferring data V 1.4.0 - DrumBrute New Features DrumBrute added to the list of devices Fixes Improved memory handling for MiniLab - Sync or Working Memory manipulations created issues Updated BeatStep firmware for offline update Devices are now not editable when in firmware update mode It is now possible to read the connected device's firmware version after an update of the MCC V 1.3.2 Fixes Beatstep : wrong embedded FW V 1.3.1 New Features Keystep : add courbe "soft" for aftertouch issue Keystep : set popup to update fw if version smaller Keystep : update fw reboot message Fixes Auto-Update : Updater tool is missing mouseUp/mouseDrag bad handled on Mac BeatStep Pro : update FW indicator issue Keylab 88 : missing value for pad velocity curve Keylab 88 : Snap button as KBD memory - memory number default value is wrong V 1.3.0 - KeyStep New Features KeyStep added to the list of devices KeyLab88 : velocity curves Fixes BeatStep pro : Crash when editing step Importing device settings, impossible to find the file to import User template(s) missing 's' Button configuration no more available Limit zoom out in piano roll and drum roll V 1.2.2 New Features BeatStep pro : Add Wait To Load Pattern function Fixes BeatStep pro : wrong global settings at opening BeatStep pro : Wrong param id Seq2 Hz/V 1V MIDI Note BeatStep pro : New factory preset (MIDI&USB, Wait to load ON, Pas to Midi Channel USER) BeatStep pro : "Device not connected" pop up when BSP not connected V 1.2.1 Fixes BeatStep pro : Remove Sync feature on BSP Update FW recalling update popup BeatStep pro : set drum map range to [0,127] BeatStep pro : inversion Seq1 Gate et Seq 2 Pitch KeyLab 88 : update (transpose, bank MSB for pads, sustain pedal threshold) Minimal Required version popup : 1.1.0.4 for KL88, 1.1.2.0 for BSP V 1.2.0 - BeatStepPro New Features Auto-Update MCC Automatic download of latest firmware HW Test interface BeatStepPro support : piano roll support bulks partial transfert of parameters from computer to device device global parameters V 1.1.0 - BeatStep New Features BeatStep support. Edit your sequences and user scales directly in the MIDI Control Center. V 1.0.1 Fixes Mac 10.9 and Windows 8: Some devices were not properly seen as connected or the communication failed. If you experienced this bug on Mac 10.9, you might have to open Audio MIDI Setup and remove the MIDI Devices that had this problem.
10.10+	Midi Control Center	03-Sep-2020	36.4 Mb	1.11.5.1661	MIDI Control Center V 1.11.5 New Features KeyStep Pro: Embedded firmware is now version 1.3.2 V 1.11.4 New Features KeyStep Pro: Embedded firmware is now version 1.3.1 KeyStep Pro: Add option to set Mod Wheel CV MOD Source KeyStep Pro: Add support for setting a Track output MIDI channel per project V 1.11.3 New Features MicroFreak : Added support for Firmware 2.1.3 (Vocoder Edition), compatible with all MicroFreak units MicroFreak : Added "Factory 2.1" bank of 224 presets , with Vocoder presets on slots 208 to 224 Updated embedded Firmware version for MicroFreak V 1.11.2 Improvements Minilab MKII 1.1.2.1166 integration Add the new pad backlight mode control from MCC Change the default color for pads in red Add the no color param for pads to allow pad backlight deactivation Allow the user to stop the octave led blinking Matrixbrute : implemented sleep mode setting V 1.11.1 New Features Embedded KeyStep Pro firmware is now version 1.1.7 Added a "firmware update available" popup Fixes KeyStep Pro: Controller Map is no longer visible KeyStep Pro: Added option to change CV Pitch Bend Range KeyStep Pro: Removed Knob Mode option in Control mode section KeyStep Pro: Minor text changes V 1.11.0 New Features KeyStep Pro integration Fixes MatrixBrute : update pop-up message is now fixed Matrixbrute : regeneration does not oscillate anymore on some presets Progress bar now better reflect the real firmware loading progress V 1.10.1 New Features KeyLab Essential 88 integration Microfreak firmware 2.0.3 integration Added "Factory 2.0" presets bank for the Microfreak Added relative bend, scale, and root note settings for the Microfreak Updated embedded firmware versions for all products V 1.10.0 New Features Added MatrixBrute Factory 2.0 bank for MCC MatrixBrute 2.0 Firmware integration Catalina compatibility: Notarize macOs installer Added a modal popup when transfering preset or memories Improvements Various improvements for preset transfer and communication with devices V 1.9.1 New Features Updated embedded firmware versions for all products Add support and parameters for KeyStep firmware 1.1.0 V 1.9.0 New Features Microlab integration KeyLab MKII : added support of USB to CV out KeyLab MKII : added acceleration on knobs Keylab MKII : added support of MMC messages Keylab MKII : Midi notes can now be assigned to sustain, expression and auxiliary pedals Improvements Improved Firmware version detection for every device V1.8.1 New features Integration of Keylab88 MKII Fixes Fix MicroFreak Factory Bank 1.1 V1.8.0 New features Integration of Microfreak Integration of Arturia USB MIDI driver for Microfreak in Windows version, allows "multi-client" MIDI handling, for Microfreak only. Integration of 2 factory preset banks for the Microfreak Improvements Improved Firmware version detection for every device Fixes MatrixBrute : Presets name, type, and characteristics can now be edited in device's area MatrixBrute : No more failure when renaming projects Matrixbrute : Interval between projects now follows scroll position properly V1.7.5 Fixes Updated embedded firmware versions for all products Various Typos corrections V 1.7.4 New Features DrumBrute Impact added to the list of devices V 1.7.3 New Features KeyLab mkII added to the list of devices MCC will recall the previous display size on reopening Fixes MatrixBrute : Factory project is now well displayed on osx 10.13 V 1.7.1 New Features Integration of MiniBrute 2 & MiniBrute 2S V 1.7.0 New Features Integration of Keylab Essential Integration of BeatStep Pro 2.0 Integration of MiniBrute Integration of MicroBrute MiniLab mk2 firmware update now expects later releases Uninstall from ASC Manual is accessible from the MCC Fixes Various BeatStep Pro fixes MIDI Console now shows events even when Sync is off Various MIDI Console fixes V 1.6.2 New Features MatrixBrute : Added VCO 1 & 2 CV 0v Offset MatrixBrute : Added Lower Part MIDI Channel MatrixBrute : Improved Sync Clock In/Out Settings Fixes MatrixBrute : Preset info properly loaded when selecting MatrixBrute in the list of devices V 1.6.1 New Features Drumbrute : added Roller/Looper section Improvements Improve tooltip message when Sync not available Failed to open device : a better workflow/popup is now provided Fixes Drumbrute : "All" has been removed from global midi channel V 1.6.0 New Features MatrixBrute added to the list of devices Fixes Updated Minilab MK2 firmware for offline update V 1.5.1 Fixes MIDI Control Center properly handles firmware updates when the computer is offline V 1.5.0 - Minilab-mkII New Features Minilab MkII added to the list of devices Fixes After a firmware update, MCC displays properly device settings No more crashes if drumbrute is disconnected while transferring data V 1.4.0 - DrumBrute New Features DrumBrute added to the list of devices Fixes Improved memory handling for MiniLab - Sync or Working Memory manipulations created issues Updated BeatStep firmware for offline update Devices are now not editable when in firmware update mode It is now possible to read the connected device's firmware version after an update of the MCC V 1.3.2 Fixes Beatstep : wrong embedded FW V 1.3.1 New Features Keystep : add courbe "soft" for aftertouch issue Keystep : set popup to update fw if version smaller Keystep : update fw reboot message Fixes Auto-Update : Updater tool is missing mouseUp/mouseDrag bad handled on Mac BeatStep Pro : update FW indicator issue Keylab 88 : missing value for pad velocity curve Keylab 88 : Snap button as KBD memory - memory number default value is wrong V 1.3.0 - KeyStep New Features KeyStep added to the list of devices KeyLab88 : velocity curves Fixes BeatStep pro : Crash when editing step Importing device settings, impossible to find the file to import User template(s) missing 's' Button configuration no more available Limit zoom out in piano roll and drum roll V 1.2.2 New Features BeatStep pro : Add Wait To Load Pattern function Fixes BeatStep pro : wrong global settings at opening BeatStep pro : Wrong param id Seq2 Hz/V 1V MIDI Note BeatStep pro : New factory preset (MIDI&USB, Wait to load ON, Pas to Midi Channel USER) BeatStep pro : "Device not connected" pop up when BSP not connected V 1.2.1 Fixes BeatStep pro : Remove Sync feature on BSP Update FW recalling update popup BeatStep pro : set drum map range to [0,127] BeatStep pro : inversion Seq1 Gate et Seq 2 Pitch KeyLab 88 : update (transpose, bank MSB for pads, sustain pedal threshold) Minimal Required version popup : 1.1.0.4 for KL88, 1.1.2.0 for BSP V 1.2.0 - BeatStepPro New Features Auto-Update MCC Automatic download of latest firmware HW Test interface BeatStepPro support : piano roll support bulks partial transfert of parameters from computer to device device global parameters V 1.1.0 - BeatStep New Features BeatStep support. Edit your sequences and user scales directly in the MIDI Control Center. V 1.0.1 Fixes Mac 10.9 and Windows 8: Some devices were not properly seen as connected or the communication failed. If you experienced this bug on Mac 10.9, you might have to open Audio MIDI Setup and remove the MIDI Devices that had this problem.
10.10+	Midi Control Center	25-Aug-2020	36.4 Mb	1.11.4.1653	MIDI Control Center V 1.11.4 New Features KeyStep Pro: Embedded firmware is now version 1.3.1 KeyStep Pro: Add option to set Mod Wheel CV MOD Source KeyStep Pro: Add support for setting a Track output MIDI channel per project V 1.11.3 New Features MicroFreak : Added support for Firmware 2.1.3 (Vocoder Edition), compatible with all MicroFreak units MicroFreak : Added "Factory 2.1" bank of 224 presets , with Vocoder presets on slots 208 to 224 Updated embedded Firmware version for MicroFreak V 1.11.2 Improvements Minilab MKII 1.1.2.1166 integration Add the new pad backlight mode control from MCC Change the default color for pads in red Add the no color param for pads to allow pad backlight deactivation Allow the user to stop the octave led blinking Matrixbrute : implemented sleep mode setting V 1.11.1 New Features Embedded KeyStep Pro firmware is now version 1.1.7 Added a "firmware update available" popup Fixes KeyStep Pro: Controller Map is no longer visible KeyStep Pro: Added option to change CV Pitch Bend Range KeyStep Pro: Removed Knob Mode option in Control mode section KeyStep Pro: Minor text changes V 1.11.0 New Features KeyStep Pro integration Fixes MatrixBrute : update pop-up message is now fixed Matrixbrute : regeneration does not oscillate anymore on some presets Progress bar now better reflect the real firmware loading progress V 1.10.1 New Features KeyLab Essential 88 integration Microfreak firmware 2.0.3 integration Added "Factory 2.0" presets bank for the Microfreak Added relative bend, scale, and root note settings for the Microfreak Updated embedded firmware versions for all products V 1.10.0 New Features Added MatrixBrute Factory 2.0 bank for MCC MatrixBrute 2.0 Firmware integration Catalina compatibility: Notarize macOs installer Added a modal popup when transfering preset or memories Improvements Various improvements for preset transfer and communication with devices V 1.9.1 New Features Updated embedded firmware versions for all products Add support and parameters for KeyStep firmware 1.1.0 V 1.9.0 New Features Microlab integration KeyLab MKII : added support of USB to CV out KeyLab MKII : added acceleration on knobs Keylab MKII : added support of MMC messages Keylab MKII : Midi notes can now be assigned to sustain, expression and auxiliary pedals Improvements Improved Firmware version detection for every device V1.8.1 New features Integration of Keylab88 MKII Fixes Fix MicroFreak Factory Bank 1.1 V1.8.0 New features Integration of Microfreak Integration of Arturia USB MIDI driver for Microfreak in Windows version, allows "multi-client" MIDI handling, for Microfreak only. Integration of 2 factory preset banks for the Microfreak Improvements Improved Firmware version detection for every device Fixes MatrixBrute : Presets name, type, and characteristics can now be edited in device's area MatrixBrute : No more failure when renaming projects Matrixbrute : Interval between projects now follows scroll position properly V1.7.5 Fixes Updated embedded firmware versions for all products Various Typos corrections V 1.7.4 New Features DrumBrute Impact added to the list of devices V 1.7.3 New Features KeyLab mkII added to the list of devices MCC will recall the previous display size on reopening Fixes MatrixBrute : Factory project is now well displayed on osx 10.13 V 1.7.1 New Features Integration of MiniBrute 2 & MiniBrute 2S V 1.7.0 New Features Integration of Keylab Essential Integration of BeatStep Pro 2.0 Integration of MiniBrute Integration of MicroBrute MiniLab mk2 firmware update now expects later releases Uninstall from ASC Manual is accessible from the MCC Fixes Various BeatStep Pro fixes MIDI Console now shows events even when Sync is off Various MIDI Console fixes V 1.6.2 New Features MatrixBrute : Added VCO 1 & 2 CV 0v Offset MatrixBrute : Added Lower Part MIDI Channel MatrixBrute : Improved Sync Clock In/Out Settings Fixes MatrixBrute : Preset info properly loaded when selecting MatrixBrute in the list of devices V 1.6.1 New Features Drumbrute : added Roller/Looper section Improvements Improve tooltip message when Sync not available Failed to open device : a better workflow/popup is now provided Fixes Drumbrute : "All" has been removed from global midi channel V 1.6.0 New Features MatrixBrute added to the list of devices Fixes Updated Minilab MK2 firmware for offline update V 1.5.1 Fixes MIDI Control Center properly handles firmware updates when the computer is offline V 1.5.0 - Minilab-mkII New Features Minilab MkII added to the list of devices Fixes After a firmware update, MCC displays properly device settings No more crashes if drumbrute is disconnected while transferring data V 1.4.0 - DrumBrute New Features DrumBrute added to the list of devices Fixes Improved memory handling for MiniLab - Sync or Working Memory manipulations created issues Updated BeatStep firmware for offline update Devices are now not editable when in firmware update mode It is now possible to read the connected device's firmware version after an update of the MCC V 1.3.2 Fixes Beatstep : wrong embedded FW V 1.3.1 New Features Keystep : add courbe "soft" for aftertouch issue Keystep : set popup to update fw if version smaller Keystep : update fw reboot message Fixes Auto-Update : Updater tool is missing mouseUp/mouseDrag bad handled on Mac BeatStep Pro : update FW indicator issue Keylab 88 : missing value for pad velocity curve Keylab 88 : Snap button as KBD memory - memory number default value is wrong V 1.3.0 - KeyStep New Features KeyStep added to the list of devices KeyLab88 : velocity curves Fixes BeatStep pro : Crash when editing step Importing device settings, impossible to find the file to import User template(s) missing 's' Button configuration no more available Limit zoom out in piano roll and drum roll V 1.2.2 New Features BeatStep pro : Add Wait To Load Pattern function Fixes BeatStep pro : wrong global settings at opening BeatStep pro : Wrong param id Seq2 Hz/V 1V MIDI Note BeatStep pro : New factory preset (MIDI&USB, Wait to load ON, Pas to Midi Channel USER) BeatStep pro : "Device not connected" pop up when BSP not connected V 1.2.1 Fixes BeatStep pro : Remove Sync feature on BSP Update FW recalling update popup BeatStep pro : set drum map range to [0,127] BeatStep pro : inversion Seq1 Gate et Seq 2 Pitch KeyLab 88 : update (transpose, bank MSB for pads, sustain pedal threshold) Minimal Required version popup : 1.1.0.4 for KL88, 1.1.2.0 for BSP V 1.2.0 - BeatStepPro New Features Auto-Update MCC Automatic download of latest firmware HW Test interface BeatStepPro support : piano roll support bulks partial transfert of parameters from computer to device device global parameters V 1.1.0 - BeatStep New Features BeatStep support. Edit your sequences and user scales directly in the MIDI Control Center. V 1.0.1 Fixes Mac 10.9 and Windows 8: Some devices were not properly seen as connected or the communication failed. If you experienced this bug on Mac 10.9, you might have to open Audio MIDI Setup and remove the MIDI Devices that had this problem.
Win 7+	Midi Control Center	25-Aug-2020	27.4 Mb	1.11.4.1653	MIDI Control Center V 1.11.4 New Features KeyStep Pro: Embedded firmware is now version 1.3.1 KeyStep Pro: Add option to set Mod Wheel CV MOD Source KeyStep Pro: Add support for setting a Track output MIDI channel per project V 1.11.3 New Features MicroFreak : Added support for Firmware 2.1.3 (Vocoder Edition), compatible with all MicroFreak units MicroFreak : Added "Factory 2.1" bank of 224 presets , with Vocoder presets on slots 208 to 224 Updated embedded Firmware version for MicroFreak V 1.11.2 Improvements Minilab MKII 1.1.2.1166 integration Add the new pad backlight mode control from MCC Change the default color for pads in red Add the no color param for pads to allow pad backlight deactivation Allow the user to stop the octave led blinking Matrixbrute : implemented sleep mode setting V 1.11.1 New Features Embedded KeyStep Pro firmware is now version 1.1.7 Added a "firmware update available" popup Fixes KeyStep Pro: Controller Map is no longer visible KeyStep Pro: Added option to change CV Pitch Bend Range KeyStep Pro: Removed Knob Mode option in Control mode section KeyStep Pro: Minor text changes V 1.11.0 New Features KeyStep Pro integration Fixes MatrixBrute : update pop-up message is now fixed Matrixbrute : regeneration does not oscillate anymore on some presets Progress bar now better reflect the real firmware loading progress V 1.10.1 New Features KeyLab Essential 88 integration Microfreak firmware 2.0.3 integration Added "Factory 2.0" presets bank for the Microfreak Added relative bend, scale, and root note settings for the Microfreak Updated embedded firmware versions for all products V 1.10.0 New Features Added MatrixBrute Factory 2.0 bank for MCC MatrixBrute 2.0 Firmware integration Catalina compatibility: Notarize macOs installer Added a modal popup when transfering preset or memories Improvements Various improvements for preset transfer and communication with devices V 1.9.1 New Features Updated embedded firmware versions for all products Add support and parameters for KeyStep firmware 1.1.0 V 1.9.0 New Features Microlab integration KeyLab MKII : added support of USB to CV out KeyLab MKII : added acceleration on knobs Keylab MKII : added support of MMC messages Keylab MKII : Midi notes can now be assigned to sustain, expression and auxiliary pedals Improvements Improved Firmware version detection for every device V1.8.1 New features Integration of Keylab88 MKII Fixes Fix MicroFreak Factory Bank 1.1 V1.8.0 New features Integration of Microfreak Integration of Arturia USB MIDI driver for Microfreak in Windows version, allows "multi-client" MIDI handling, for Microfreak only. Integration of 2 factory preset banks for the Microfreak Improvements Improved Firmware version detection for every device Fixes MatrixBrute : Presets name, type, and characteristics can now be edited in device's area MatrixBrute : No more failure when renaming projects Matrixbrute : Interval between projects now follows scroll position properly V1.7.5 Fixes Updated embedded firmware versions for all products Various Typos corrections V 1.7.4 New Features DrumBrute Impact added to the list of devices V 1.7.3 New Features KeyLab mkII added to the list of devices MCC will recall the previous display size on reopening Fixes MatrixBrute : Factory project is now well displayed on osx 10.13 V 1.7.1 New Features Integration of MiniBrute 2 & MiniBrute 2S V 1.7.0 New Features Integration of Keylab Essential Integration of BeatStep Pro 2.0 Integration of MiniBrute Integration of MicroBrute MiniLab mk2 firmware update now expects later releases Uninstall from ASC Manual is accessible from the MCC Fixes Various BeatStep Pro fixes MIDI Console now shows events even when Sync is off Various MIDI Console fixes V 1.6.2 New Features MatrixBrute : Added VCO 1 & 2 CV 0v Offset MatrixBrute : Added Lower Part MIDI Channel MatrixBrute : Improved Sync Clock In/Out Settings Fixes MatrixBrute : Preset info properly loaded when selecting MatrixBrute in the list of devices V 1.6.1 New Features Drumbrute : added Roller/Looper section Improvements Improve tooltip message when Sync not available Failed to open device : a better workflow/popup is now provided Fixes Drumbrute : "All" has been removed from global midi channel V 1.6.0 New Features MatrixBrute added to the list of devices Fixes Updated Minilab MK2 firmware for offline update V 1.5.1 Fixes MIDI Control Center properly handles firmware updates when the computer is offline V 1.5.0 - Minilab-mkII New Features Minilab MkII added to the list of devices Fixes After a firmware update, MCC displays properly device settings No more crashes if drumbrute is disconnected while transferring data V 1.4.0 - DrumBrute New Features DrumBrute added to the list of devices Fixes Improved memory handling for MiniLab - Sync or Working Memory manipulations created issues Updated BeatStep firmware for offline update Devices are now not editable when in firmware update mode It is now possible to read the connected device's firmware version after an update of the MCC V 1.3.2 Fixes Beatstep : wrong embedded FW V 1.3.1 New Features Keystep : add courbe "soft" for aftertouch issue Keystep : set popup to update fw if version smaller Keystep : update fw reboot message Fixes Auto-Update : Updater tool is missing mouseUp/mouseDrag bad handled on Mac BeatStep Pro : update FW indicator issue Keylab 88 : missing value for pad velocity curve Keylab 88 : Snap button as KBD memory - memory number default value is wrong V 1.3.0 - KeyStep New Features KeyStep added to the list of devices KeyLab88 : velocity curves Fixes BeatStep pro : Crash when editing step Importing device settings, impossible to find the file to import User template(s) missing 's' Button configuration no more available Limit zoom out in piano roll and drum roll V 1.2.2 New Features BeatStep pro : Add Wait To Load Pattern function Fixes BeatStep pro : wrong global settings at opening BeatStep pro : Wrong param id Seq2 Hz/V 1V MIDI Note BeatStep pro : New factory preset (MIDI&USB, Wait to load ON, Pas to Midi Channel USER) BeatStep pro : "Device not connected" pop up when BSP not connected V 1.2.1 Fixes BeatStep pro : Remove Sync feature on BSP Update FW recalling update popup BeatStep pro : set drum map range to [0,127] BeatStep pro : inversion Seq1 Gate et Seq 2 Pitch KeyLab 88 : update (transpose, bank MSB for pads, sustain pedal threshold) Minimal Required version popup : 1.1.0.4 for KL88, 1.1.2.0 for BSP V 1.2.0 - BeatStepPro New Features Auto-Update MCC Automatic download of latest firmware HW Test interface BeatStepPro support : piano roll support bulks partial transfert of parameters from computer to device device global parameters V 1.1.0 - BeatStep New Features BeatStep support. Edit your sequences and user scales directly in the MIDI Control Center. V 1.0.1 Fixes Mac 10.9 and Windows 8: Some devices were not properly seen as connected or the communication failed. If you experienced this bug on Mac 10.9, you might have to open Audio MIDI Setup and remove the MIDI Devices that had this problem.
10.10+	Midi Control Center	25-Aug-2020	36.4 Mb	1.11.3.65	MIDI Control Center V 1.11.3 New Features MicroFreak : Added support for Firmware 2.1.3 (Vocoder Edition), compatible with all MicroFreak units MicroFreak : Added "Factory 2.1" bank of 224 presets , with Vocoder presets on slots 208 to 224 Updated embedded Firmware version for MicroFreak V 1.11.2 Improvements Minilab MKII 1.1.2.1166 integration Add the new pad backlight mode control from MCC Change the default color for pads in red Add the no color param for pads to allow pad backlight deactivation Allow the user to stop the octave led blinking Matrixbrute : implemented sleep mode setting V 1.11.1 New Features Embedded KeyStep Pro firmware is now version 1.1.7 Added a "firmware update available" popup Fixes KeyStep Pro: Controller Map is no longer visible KeyStep Pro: Added option to change CV Pitch Bend Range KeyStep Pro: Removed Knob Mode option in Control mode section KeyStep Pro: Minor text changes V 1.11.0 New Features KeyStep Pro integration Fixes MatrixBrute : update pop-up message is now fixed Matrixbrute : regeneration does not oscillate anymore on some presets Progress bar now better reflect the real firmware loading progress V 1.10.1 New Features KeyLab Essential 88 integration Microfreak firmware 2.0.3 integration Added "Factory 2.0" presets bank for the Microfreak Added relative bend, scale, and root note settings for the Microfreak Updated embedded firmware versions for all products V 1.10.0 New Features Added MatrixBrute Factory 2.0 bank for MCC MatrixBrute 2.0 Firmware integration Catalina compatibility: Notarize macOs installer Added a modal popup when transfering preset or memories Improvements Various improvements for preset transfer and communication with devices V 1.9.1 New Features Updated embedded firmware versions for all products Add support and parameters for KeyStep firmware 1.1.0 V 1.9.0 New Features Microlab integration KeyLab MKII : added support of USB to CV out KeyLab MKII : added acceleration on knobs Keylab MKII : added support of MMC messages Keylab MKII : Midi notes can now be assigned to sustain, expression and auxiliary pedals Improvements Improved Firmware version detection for every device V1.8.1 New features Integration of Keylab88 MKII Fixes Fix MicroFreak Factory Bank 1.1 V1.8.0 New features Integration of Microfreak Integration of Arturia USB MIDI driver for Microfreak in Windows version, allows "multi-client" MIDI handling, for Microfreak only. Integration of 2 factory preset banks for the Microfreak Improvements Improved Firmware version detection for every device Fixes MatrixBrute : Presets name, type, and characteristics can now be edited in device's area MatrixBrute : No more failure when renaming projects Matrixbrute : Interval between projects now follows scroll position properly V1.7.5 Fixes Updated embedded firmware versions for all products Various Typos corrections V 1.7.4 New Features DrumBrute Impact added to the list of devices V 1.7.3 New Features KeyLab mkII added to the list of devices MCC will recall the previous display size on reopening Fixes MatrixBrute : Factory project is now well displayed on osx 10.13 V 1.7.1 New Features Integration of MiniBrute 2 & MiniBrute 2S V 1.7.0 New Features Integration of Keylab Essential Integration of BeatStep Pro 2.0 Integration of MiniBrute Integration of MicroBrute MiniLab mk2 firmware update now expects later releases Uninstall from ASC Manual is accessible from the MCC Fixes Various BeatStep Pro fixes MIDI Console now shows events even when Sync is off Various MIDI Console fixes V 1.6.2 New Features MatrixBrute : Added VCO 1 & 2 CV 0v Offset MatrixBrute : Added Lower Part MIDI Channel MatrixBrute : Improved Sync Clock In/Out Settings Fixes MatrixBrute : Preset info properly loaded when selecting MatrixBrute in the list of devices V 1.6.1 New Features Drumbrute : added Roller/Looper section Improvements Improve tooltip message when Sync not available Failed to open device : a better workflow/popup is now provided Fixes Drumbrute : "All" has been removed from global midi channel V 1.6.0 New Features MatrixBrute added to the list of devices Fixes Updated Minilab MK2 firmware for offline update V 1.5.1 Fixes MIDI Control Center properly handles firmware updates when the computer is offline V 1.5.0 - Minilab-mkII New Features Minilab MkII added to the list of devices Fixes After a firmware update, MCC displays properly device settings No more crashes if drumbrute is disconnected while transferring data V 1.4.0 - DrumBrute New Features DrumBrute added to the list of devices Fixes Improved memory handling for MiniLab - Sync or Working Memory manipulations created issues Updated BeatStep firmware for offline update Devices are now not editable when in firmware update mode It is now possible to read the connected device's firmware version after an update of the MCC V 1.3.2 Fixes Beatstep : wrong embedded FW V 1.3.1 New Features Keystep : add courbe "soft" for aftertouch issue Keystep : set popup to update fw if version smaller Keystep : update fw reboot message Fixes Auto-Update : Updater tool is missing mouseUp/mouseDrag bad handled on Mac BeatStep Pro : update FW indicator issue Keylab 88 : missing value for pad velocity curve Keylab 88 : Snap button as KBD memory - memory number default value is wrong V 1.3.0 - KeyStep New Features KeyStep added to the list of devices KeyLab88 : velocity curves Fixes BeatStep pro : Crash when editing step Importing device settings, impossible to find the file to import User template(s) missing 's' Button configuration no more available Limit zoom out in piano roll and drum roll V 1.2.2 New Features BeatStep pro : Add Wait To Load Pattern function Fixes BeatStep pro : wrong global settings at opening BeatStep pro : Wrong param id Seq2 Hz/V 1V MIDI Note BeatStep pro : New factory preset (MIDI&USB, Wait to load ON, Pas to Midi Channel USER) BeatStep pro : "Device not connected" pop up when BSP not connected V 1.2.1 Fixes BeatStep pro : Remove Sync feature on BSP Update FW recalling update popup BeatStep pro : set drum map range to [0,127] BeatStep pro : inversion Seq1 Gate et Seq 2 Pitch KeyLab 88 : update (transpose, bank MSB for pads, sustain pedal threshold) Minimal Required version popup : 1.1.0.4 for KL88, 1.1.2.0 for BSP V 1.2.0 - BeatStepPro New Features Auto-Update MCC Automatic download of latest firmware HW Test interface BeatStepPro support : piano roll support bulks partial transfert of parameters from computer to device device global parameters V 1.1.0 - BeatStep New Features BeatStep support. Edit your sequences and user scales directly in the MIDI Control Center. V 1.0.1 Fixes Mac 10.9 and Windows 8: Some devices were not properly seen as connected or the communication failed. If you experienced this bug on Mac 10.9, you might have to open Audio MIDI Setup and remove the MIDI Devices that had this problem.
Win 7+	Midi Control Center	25-Aug-2020	27.4 Mb	1.11.3.65	MIDI Control Center V 1.11.3 New Features MicroFreak : Added support for Firmware 2.1.3 (Vocoder Edition), compatible with all MicroFreak units MicroFreak : Added "Factory 2.1" bank of 224 presets , with Vocoder presets on slots 208 to 224 Updated embedded Firmware version for MicroFreak V 1.11.2 Improvements Minilab MKII 1.1.2.1166 integration Add the new pad backlight mode control from MCC Change the default color for pads in red Add the no color param for pads to allow pad backlight deactivation Allow the user to stop the octave led blinking Matrixbrute : implemented sleep mode setting V 1.11.1 New Features Embedded KeyStep Pro firmware is now version 1.1.7 Added a "firmware update available" popup Fixes KeyStep Pro: Controller Map is no longer visible KeyStep Pro: Added option to change CV Pitch Bend Range KeyStep Pro: Removed Knob Mode option in Control mode section KeyStep Pro: Minor text changes V 1.11.0 New Features KeyStep Pro integration Fixes MatrixBrute : update pop-up message is now fixed Matrixbrute : regeneration does not oscillate anymore on some presets Progress bar now better reflect the real firmware loading progress V 1.10.1 New Features KeyLab Essential 88 integration Microfreak firmware 2.0.3 integration Added "Factory 2.0" presets bank for the Microfreak Added relative bend, scale, and root note settings for the Microfreak Updated embedded firmware versions for all products V 1.10.0 New Features Added MatrixBrute Factory 2.0 bank for MCC MatrixBrute 2.0 Firmware integration Catalina compatibility: Notarize macOs installer Added a modal popup when transfering preset or memories Improvements Various improvements for preset transfer and communication with devices V 1.9.1 New Features Updated embedded firmware versions for all products Add support and parameters for KeyStep firmware 1.1.0 V 1.9.0 New Features Microlab integration KeyLab MKII : added support of USB to CV out KeyLab MKII : added acceleration on knobs Keylab MKII : added support of MMC messages Keylab MKII : Midi notes can now be assigned to sustain, expression and auxiliary pedals Improvements Improved Firmware version detection for every device V1.8.1 New features Integration of Keylab88 MKII Fixes Fix MicroFreak Factory Bank 1.1 V1.8.0 New features Integration of Microfreak Integration of Arturia USB MIDI driver for Microfreak in Windows version, allows "multi-client" MIDI handling, for Microfreak only. Integration of 2 factory preset banks for the Microfreak Improvements Improved Firmware version detection for every device Fixes MatrixBrute : Presets name, type, and characteristics can now be edited in device's area MatrixBrute : No more failure when renaming projects Matrixbrute : Interval between projects now follows scroll position properly V1.7.5 Fixes Updated embedded firmware versions for all products Various Typos corrections V 1.7.4 New Features DrumBrute Impact added to the list of devices V 1.7.3 New Features KeyLab mkII added to the list of devices MCC will recall the previous display size on reopening Fixes MatrixBrute : Factory project is now well displayed on osx 10.13 V 1.7.1 New Features Integration of MiniBrute 2 & MiniBrute 2S V 1.7.0 New Features Integration of Keylab Essential Integration of BeatStep Pro 2.0 Integration of MiniBrute Integration of MicroBrute MiniLab mk2 firmware update now expects later releases Uninstall from ASC Manual is accessible from the MCC Fixes Various BeatStep Pro fixes MIDI Console now shows events even when Sync is off Various MIDI Console fixes V 1.6.2 New Features MatrixBrute : Added VCO 1 & 2 CV 0v Offset MatrixBrute : Added Lower Part MIDI Channel MatrixBrute : Improved Sync Clock In/Out Settings Fixes MatrixBrute : Preset info properly loaded when selecting MatrixBrute in the list of devices V 1.6.1 New Features Drumbrute : added Roller/Looper section Improvements Improve tooltip message when Sync not available Failed to open device : a better workflow/popup is now provided Fixes Drumbrute : "All" has been removed from global midi channel V 1.6.0 New Features MatrixBrute added to the list of devices Fixes Updated Minilab MK2 firmware for offline update V 1.5.1 Fixes MIDI Control Center properly handles firmware updates when the computer is offline V 1.5.0 - Minilab-mkII New Features Minilab MkII added to the list of devices Fixes After a firmware update, MCC displays properly device settings No more crashes if drumbrute is disconnected while transferring data V 1.4.0 - DrumBrute New Features DrumBrute added to the list of devices Fixes Improved memory handling for MiniLab - Sync or Working Memory manipulations created issues Updated BeatStep firmware for offline update Devices are now not editable when in firmware update mode It is now possible to read the connected device's firmware version after an update of the MCC V 1.3.2 Fixes Beatstep : wrong embedded FW V 1.3.1 New Features Keystep : add courbe "soft" for aftertouch issue Keystep : set popup to update fw if version smaller Keystep : update fw reboot message Fixes Auto-Update : Updater tool is missing mouseUp/mouseDrag bad handled on Mac BeatStep Pro : update FW indicator issue Keylab 88 : missing value for pad velocity curve Keylab 88 : Snap button as KBD memory - memory number default value is wrong V 1.3.0 - KeyStep New Features KeyStep added to the list of devices KeyLab88 : velocity curves Fixes BeatStep pro : Crash when editing step Importing device settings, impossible to find the file to import User template(s) missing 's' Button configuration no more available Limit zoom out in piano roll and drum roll V 1.2.2 New Features BeatStep pro : Add Wait To Load Pattern function Fixes BeatStep pro : wrong global settings at opening BeatStep pro : Wrong param id Seq2 Hz/V 1V MIDI Note BeatStep pro : New factory preset (MIDI&USB, Wait to load ON, Pas to Midi Channel USER) BeatStep pro : "Device not connected" pop up when BSP not connected V 1.2.1 Fixes BeatStep pro : Remove Sync feature on BSP Update FW recalling update popup BeatStep pro : set drum map range to [0,127] BeatStep pro : inversion Seq1 Gate et Seq 2 Pitch KeyLab 88 : update (transpose, bank MSB for pads, sustain pedal threshold) Minimal Required version popup : 1.1.0.4 for KL88, 1.1.2.0 for BSP V 1.2.0 - BeatStepPro New Features Auto-Update MCC Automatic download of latest firmware HW Test interface BeatStepPro support : piano roll support bulks partial transfert of parameters from computer to device device global parameters V 1.1.0 - BeatStep New Features BeatStep support. Edit your sequences and user scales directly in the MIDI Control Center. V 1.0.1 Fixes Mac 10.9 and Windows 8: Some devices were not properly seen as connected or the communication failed. If you experienced this bug on Mac 10.9, you might have to open Audio MIDI Setup and remove the MIDI Devices that had this problem.
10.10+	Midi Control Center	23-Jun-2020	36.2 Mb	1.11.2.1600	MIDI Control Center V1.11.2 Improvements Minilab MKII 1.1.2.1166 integration Add the new pad backlight mode control from MCC Change the default color for pads in red Add the no color param for pads to allow pad backlight deactivation Allow the user to stop the octave led blinking V1.11.1 New Features Embedded KeyStep Pro firmware is now version 1.1.7 Added a "firmware update available" popup Fixes KeyStep Pro: Controller Map is no longer visible KeyStep Pro: Added option to change CV Pitch Bend Range KeyStep Pro: Removed Knob Mode option in Control mode section KeyStep Pro: Minor text changes V 1.11.0 New Features KeyStep Pro integration Fixes MatrixBrute : update pop-up message is now fixed Matrixbrute : regeneration does not oscillate anymore on some presets Progress bar now better reflect the real firmware loading progress V 1.10.1 New Features KeyLab Essential 88 integration Microfreak firmware 2.0.3 integration Added "Factory 2.0" presets bank for the Microfreak Added relative bend, scale, and root note settings for the Microfreak Updated embedded firmware versions for all products V 1.10.0 New Features Added MatrixBrute Factory 2.0 bank for MCC MatrixBrute 2.0 Firmware integration Catalina compatibility: Notarize macOs installer Added a modal popup when transfering preset or memories Improvements Various improvements for preset transfer and communication with devices V 1.9.1 New Features Updated embedded firmware versions for all products Add support and parameters for KeyStep firmware 1.1.0 V 1.9.0 New Features Microlab integration KeyLab MKII : added support of USB to CV out KeyLab MKII : added acceleration on knobs Keylab MKII : added support of MMC messages Keylab MKII : Midi notes can now be assigned to sustain, expression and auxiliary pedals Improvements Improved Firmware version detection for every device V1.8.1 New features Integration of Keylab88 MKII Fixes Fix MicroFreak Factory Bank 1.1 V1.8.0 New features Integration of Microfreak Integration of Arturia USB MIDI driver for Microfreak in Windows version, allows "multi-client" MIDI handling, for Microfreak only. Integration of 2 factory preset banks for the Microfreak Improvements Improved Firmware version detection for every device Fixes MatrixBrute : Presets name, type, and characteristics can now be edited in device's area MatrixBrute : No more failure when renaming projects Matrixbrute : Interval between projects now follows scroll position properly V1.7.5 Fixes Updated embedded firmware versions for all products Various Typos corrections V 1.7.4 New Features DrumBrute Impact added to the list of devices V 1.7.3 New Features KeyLab mkII added to the list of devices MCC will recall the previous display size on reopening Fixes MatrixBrute : Factory project is now well displayed on osx 10.13 V 1.7.1 New Features Integration of MiniBrute 2 & MiniBrute 2S V 1.7.0 New Features Integration of Keylab Essential Integration of BeatStep Pro 2.0 Integration of MiniBrute Integration of MicroBrute MiniLab mk2 firmware update now expects later releases Uninstall from ASC Manual is accessible from the MCC Fixes Various BeatStep Pro fixes MIDI Console now shows events even when Sync is off Various MIDI Console fixes V 1.6.2 New Features MatrixBrute : Added VCO 1 & 2 CV 0v Offset MatrixBrute : Added Lower Part MIDI Channel MatrixBrute : Improved Sync Clock In/Out Settings Fixes MatrixBrute : Preset info properly loaded when selecting MatrixBrute in the list of devices V 1.6.1 New Features Drumbrute : added Roller/Looper section Improvements Improve tooltip message when Sync not available Failed to open device : a better workflow/popup is now provided Fixes Drumbrute : "All" has been removed from global midi channel V 1.6.0 New Features MatrixBrute added to the list of devices Fixes Updated Minilab MK2 firmware for offline update V 1.5.1 Fixes MIDI Control Center properly handles firmware updates when the computer is offline V 1.5.0 - Minilab-mkII New Features Minilab MkII added to the list of devices Fixes After a firmware update, MCC displays properly device settings No more crashes if drumbrute is disconnected while transferring data V 1.4.0 - DrumBrute New Features DrumBrute added to the list of devices Fixes Improved memory handling for MiniLab - Sync or Working Memory manipulations created issues Updated BeatStep firmware for offline update Devices are now not editable when in firmware update mode It is now possible to read the connected device's firmware version after an update of the MCC V 1.3.2 Fixes Beatstep : wrong embedded FW V 1.3.1 New Features Keystep : add courbe "soft" for aftertouch issue Keystep : set popup to update fw if version smaller Keystep : update fw reboot message Fixes Auto-Update : Updater tool is missing mouseUp/mouseDrag bad handled on Mac BeatStep Pro : update FW indicator issue Keylab 88 : missing value for pad velocity curve Keylab 88 : Snap button as KBD memory - memory number default value is wrong V 1.3.0 - KeyStep New Features KeyStep added to the list of devices KeyLab88 : velocity curves Fixes BeatStep pro : Crash when editing step Importing device settings, impossible to find the file to import User template(s) missing 's' Button configuration no more available Limit zoom out in piano roll and drum roll V 1.2.2 New Features BeatStep pro : Add Wait To Load Pattern function Fixes BeatStep pro : wrong global settings at opening BeatStep pro : Wrong param id Seq2 Hz/V 1V MIDI Note BeatStep pro : New factory preset (MIDI&USB, Wait to load ON, Pas to Midi Channel USER) BeatStep pro : "Device not connected" pop up when BSP not connected V 1.2.1 Fixes BeatStep pro : Remove Sync feature on BSP Update FW recalling update popup BeatStep pro : set drum map range to [0,127] BeatStep pro : inversion Seq1 Gate et Seq 2 Pitch KeyLab 88 : update (transpose, bank MSB for pads, sustain pedal threshold) Minimal Required version popup : 1.1.0.4 for KL88, 1.1.2.0 for BSP V 1.2.0 - BeatStepPro New Features Auto-Update MCC Automatic download of latest firmware HW Test interface BeatStepPro support : piano roll support bulks partial transfert of parameters from computer to device device global parameters V 1.1.0 - BeatStep New Features BeatStep support. Edit your sequences and user scales directly in the MIDI Control Center. V 1.0.1 Fixes Mac 10.9 and Windows 8: Some devices were not properly seen as connected or the communication failed. If you experienced this bug on Mac 10.9, you might have to open Audio MIDI Setup and remove the MIDI Devices that had this problem.
Win 7+	Midi Control Center	23-Jun-2020	27.4 Mb	1.11.2.1600	MIDI Control Center V1.11.2 Improvements Minilab MKII 1.1.2.1166 integration Add the new pad backlight mode control from MCC Change the default color for pads in red Add the no color param for pads to allow pad backlight deactivation Allow the user to stop the octave led blinking V1.11.1 New Features Embedded KeyStep Pro firmware is now version 1.1.7 Added a "firmware update available" popup Fixes KeyStep Pro: Controller Map is no longer visible KeyStep Pro: Added option to change CV Pitch Bend Range KeyStep Pro: Removed Knob Mode option in Control mode section KeyStep Pro: Minor text changes V 1.11.0 New Features KeyStep Pro integration Fixes MatrixBrute : update pop-up message is now fixed Matrixbrute : regeneration does not oscillate anymore on some presets Progress bar now better reflect the real firmware loading progress V 1.10.1 New Features KeyLab Essential 88 integration Microfreak firmware 2.0.3 integration Added "Factory 2.0" presets bank for the Microfreak Added relative bend, scale, and root note settings for the Microfreak Updated embedded firmware versions for all products V 1.10.0 New Features Added MatrixBrute Factory 2.0 bank for MCC MatrixBrute 2.0 Firmware integration Catalina compatibility: Notarize macOs installer Added a modal popup when transfering preset or memories Improvements Various improvements for preset transfer and communication with devices V 1.9.1 New Features Updated embedded firmware versions for all products Add support and parameters for KeyStep firmware 1.1.0 V 1.9.0 New Features Microlab integration KeyLab MKII : added support of USB to CV out KeyLab MKII : added acceleration on knobs Keylab MKII : added support of MMC messages Keylab MKII : Midi notes can now be assigned to sustain, expression and auxiliary pedals Improvements Improved Firmware version detection for every device V1.8.1 New features Integration of Keylab88 MKII Fixes Fix MicroFreak Factory Bank 1.1 V1.8.0 New features Integration of Microfreak Integration of Arturia USB MIDI driver for Microfreak in Windows version, allows "multi-client" MIDI handling, for Microfreak only. Integration of 2 factory preset banks for the Microfreak Improvements Improved Firmware version detection for every device Fixes MatrixBrute : Presets name, type, and characteristics can now be edited in device's area MatrixBrute : No more failure when renaming projects Matrixbrute : Interval between projects now follows scroll position properly V1.7.5 Fixes Updated embedded firmware versions for all products Various Typos corrections V 1.7.4 New Features DrumBrute Impact added to the list of devices V 1.7.3 New Features KeyLab mkII added to the list of devices MCC will recall the previous display size on reopening Fixes MatrixBrute : Factory project is now well displayed on osx 10.13 V 1.7.1 New Features Integration of MiniBrute 2 & MiniBrute 2S V 1.7.0 New Features Integration of Keylab Essential Integration of BeatStep Pro 2.0 Integration of MiniBrute Integration of MicroBrute MiniLab mk2 firmware update now expects later releases Uninstall from ASC Manual is accessible from the MCC Fixes Various BeatStep Pro fixes MIDI Console now shows events even when Sync is off Various MIDI Console fixes V 1.6.2 New Features MatrixBrute : Added VCO 1 & 2 CV 0v Offset MatrixBrute : Added Lower Part MIDI Channel MatrixBrute : Improved Sync Clock In/Out Settings Fixes MatrixBrute : Preset info properly loaded when selecting MatrixBrute in the list of devices V 1.6.1 New Features Drumbrute : added Roller/Looper section Improvements Improve tooltip message when Sync not available Failed to open device : a better workflow/popup is now provided Fixes Drumbrute : "All" has been removed from global midi channel V 1.6.0 New Features MatrixBrute added to the list of devices Fixes Updated Minilab MK2 firmware for offline update V 1.5.1 Fixes MIDI Control Center properly handles firmware updates when the computer is offline V 1.5.0 - Minilab-mkII New Features Minilab MkII added to the list of devices Fixes After a firmware update, MCC displays properly device settings No more crashes if drumbrute is disconnected while transferring data V 1.4.0 - DrumBrute New Features DrumBrute added to the list of devices Fixes Improved memory handling for MiniLab - Sync or Working Memory manipulations created issues Updated BeatStep firmware for offline update Devices are now not editable when in firmware update mode It is now possible to read the connected device's firmware version after an update of the MCC V 1.3.2 Fixes Beatstep : wrong embedded FW V 1.3.1 New Features Keystep : add courbe "soft" for aftertouch issue Keystep : set popup to update fw if version smaller Keystep : update fw reboot message Fixes Auto-Update : Updater tool is missing mouseUp/mouseDrag bad handled on Mac BeatStep Pro : update FW indicator issue Keylab 88 : missing value for pad velocity curve Keylab 88 : Snap button as KBD memory - memory number default value is wrong V 1.3.0 - KeyStep New Features KeyStep added to the list of devices KeyLab88 : velocity curves Fixes BeatStep pro : Crash when editing step Importing device settings, impossible to find the file to import User template(s) missing 's' Button configuration no more available Limit zoom out in piano roll and drum roll V 1.2.2 New Features BeatStep pro : Add Wait To Load Pattern function Fixes BeatStep pro : wrong global settings at opening BeatStep pro : Wrong param id Seq2 Hz/V 1V MIDI Note BeatStep pro : New factory preset (MIDI&USB, Wait to load ON, Pas to Midi Channel USER) BeatStep pro : "Device not connected" pop up when BSP not connected V 1.2.1 Fixes BeatStep pro : Remove Sync feature on BSP Update FW recalling update popup BeatStep pro : set drum map range to [0,127] BeatStep pro : inversion Seq1 Gate et Seq 2 Pitch KeyLab 88 : update (transpose, bank MSB for pads, sustain pedal threshold) Minimal Required version popup : 1.1.0.4 for KL88, 1.1.2.0 for BSP V 1.2.0 - BeatStepPro New Features Auto-Update MCC Automatic download of latest firmware HW Test interface BeatStepPro support : piano roll support bulks partial transfert of parameters from computer to device device global parameters V 1.1.0 - BeatStep New Features BeatStep support. Edit your sequences and user scales directly in the MIDI Control Center. V 1.0.1 Fixes Mac 10.9 and Windows 8: Some devices were not properly seen as connected or the communication failed. If you experienced this bug on Mac 10.9, you might have to open Audio MIDI Setup and remove the MIDI Devices that had this problem.
10.10+	Midi Control Center	21-Apr-2020	35.6 Mb	1.11.1.1538	MIDI Control Center V1.11.1 New Features Embedded KeyStep Pro firmware is now version 1.1.7 Added a "firmware update available" popup Fixes KeyStep Pro: Controller Map is no longer visible KeyStep Pro: Added option to change CV Pitch Bend Range KeyStep Pro: Removed Knob Mode option in Control mode section KeyStep Pro: Minor text changes V 1.11.0 New Features KeyStep Pro integration Fixes MatrixBrute : update pop-up message is now fixed Matrixbrute : regeneration does not oscillate anymore on some presets Progress bar now better reflect the real firmware loading progress V 1.10.1 New Features KeyLab Essential 88 integration Microfreak firmware 2.0.3 integration Added "Factory 2.0" presets bank for the Microfreak Added relative bend, scale, and root note settings for the Microfreak Updated embedded firmware versions for all products V 1.10.0 New Features Added MatrixBrute Factory 2.0 bank for MCC MatrixBrute 2.0 Firmware integration Catalina compatibility: Notarize macOs installer Added a modal popup when transfering preset or memories Improvements Various improvements for preset transfer and communication with devices V 1.9.1 New Features Updated embedded firmware versions for all products Add support and parameters for KeyStep firmware 1.1.0 V 1.9.0 New Features Microlab integration KeyLab MKII : added support of USB to CV out KeyLab MKII : added acceleration on knobs Keylab MKII : added support of MMC messages Keylab MKII : Midi notes can now be assigned to sustain, expression and auxiliary pedals Improvements Improved Firmware version detection for every device V1.8.1 New features Integration of Keylab88 MKII Fixes Fix MicroFreak Factory Bank 1.1 V1.8.0 New features Integration of Microfreak Integration of Arturia USB MIDI driver for Microfreak in Windows version, allows "multi-client" MIDI handling, for Microfreak only. Integration of 2 factory preset banks for the Microfreak Improvements Improved Firmware version detection for every device Fixes MatrixBrute : Presets name, type, and characteristics can now be edited in device's area MatrixBrute : No more failure when renaming projects Matrixbrute : Interval between projects now follows scroll position properly V1.7.5 Fixes Updated embedded firmware versions for all products Various Typos corrections V 1.7.4 New Features DrumBrute Impact added to the list of devices V 1.7.3 New Features KeyLab mkII added to the list of devices MCC will recall the previous display size on reopening Fixes MatrixBrute : Factory project is now well displayed on osx 10.13 V 1.7.1 New Features Integration of MiniBrute 2 & MiniBrute 2S V 1.7.0 New Features Integration of Keylab Essential Integration of BeatStep Pro 2.0 Integration of MiniBrute Integration of MicroBrute MiniLab mk2 firmware update now expects later releases Uninstall from ASC Manual is accessible from the MCC Fixes Various BeatStep Pro fixes MIDI Console now shows events even when Sync is off Various MIDI Console fixes V 1.6.2 New Features MatrixBrute : Added VCO 1 & 2 CV 0v Offset MatrixBrute : Added Lower Part MIDI Channel MatrixBrute : Improved Sync Clock In/Out Settings Fixes MatrixBrute : Preset info properly loaded when selecting MatrixBrute in the list of devices V 1.6.1 New Features Drumbrute : added Roller/Looper section Improvements Improve tooltip message when Sync not available Failed to open device : a better workflow/popup is now provided Fixes Drumbrute : "All" has been removed from global midi channel V 1.6.0 New Features MatrixBrute added to the list of devices Fixes Updated Minilab MK2 firmware for offline update V 1.5.1 Fixes MIDI Control Center properly handles firmware updates when the computer is offline V 1.5.0 - Minilab-mkII New Features Minilab MkII added to the list of devices Fixes After a firmware update, MCC displays properly device settings No more crashes if drumbrute is disconnected while transferring data V 1.4.0 - DrumBrute New Features DrumBrute added to the list of devices Fixes Improved memory handling for MiniLab - Sync or Working Memory manipulations created issues Updated BeatStep firmware for offline update Devices are now not editable when in firmware update mode It is now possible to read the connected device's firmware version after an update of the MCC V 1.3.2 Fixes Beatstep : wrong embedded FW V 1.3.1 New Features Keystep : add courbe "soft" for aftertouch issue Keystep : set popup to update fw if version smaller Keystep : update fw reboot message Fixes Auto-Update : Updater tool is missing mouseUp/mouseDrag bad handled on Mac BeatStep Pro : update FW indicator issue Keylab 88 : missing value for pad velocity curve Keylab 88 : Snap button as KBD memory - memory number default value is wrong V 1.3.0 - KeyStep New Features KeyStep added to the list of devices KeyLab88 : velocity curves Fixes BeatStep pro : Crash when editing step Importing device settings, impossible to find the file to import User template(s) missing 's' Button configuration no more available Limit zoom out in piano roll and drum roll V 1.2.2 New Features BeatStep pro : Add Wait To Load Pattern function Fixes BeatStep pro : wrong global settings at opening BeatStep pro : Wrong param id Seq2 Hz/V 1V MIDI Note BeatStep pro : New factory preset (MIDI&USB, Wait to load ON, Pas to Midi Channel USER) BeatStep pro : "Device not connected" pop up when BSP not connected V 1.2.1 Fixes BeatStep pro : Remove Sync feature on BSP Update FW recalling update popup BeatStep pro : set drum map range to [0,127] BeatStep pro : inversion Seq1 Gate et Seq 2 Pitch KeyLab 88 : update (transpose, bank MSB for pads, sustain pedal threshold) Minimal Required version popup : 1.1.0.4 for KL88, 1.1.2.0 for BSP V 1.2.0 - BeatStepPro New Features Auto-Update MCC Automatic download of latest firmware HW Test interface BeatStepPro support : piano roll support bulks partial transfert of parameters from computer to device device global parameters V 1.1.0 - BeatStep New Features BeatStep support. Edit your sequences and user scales directly in the MIDI Control Center. V 1.0.1 Fixes Mac 10.9 and Windows 8: Some devices were not properly seen as connected or the communication failed. If you experienced this bug on Mac 10.9, you might have to open Audio MIDI Setup and remove the MIDI Devices that had this problem.
Win 7+	Midi Control Center	21-Apr-2020	26.8 Mb	1.11.1.1538	MIDI Control Center V1.11.1 New Features Embedded KeyStep Pro firmware is now version 1.1.7 Added a "firmware update available" popup Fixes KeyStep Pro: Controller Map is no longer visible KeyStep Pro: Added option to change CV Pitch Bend Range KeyStep Pro: Removed Knob Mode option in Control mode section KeyStep Pro: Minor text changes V 1.11.0 New Features KeyStep Pro integration Fixes MatrixBrute : update pop-up message is now fixed Matrixbrute : regeneration does not oscillate anymore on some presets Progress bar now better reflect the real firmware loading progress V 1.10.1 New Features KeyLab Essential 88 integration Microfreak firmware 2.0.3 integration Added "Factory 2.0" presets bank for the Microfreak Added relative bend, scale, and root note settings for the Microfreak Updated embedded firmware versions for all products V 1.10.0 New Features Added MatrixBrute Factory 2.0 bank for MCC MatrixBrute 2.0 Firmware integration Catalina compatibility: Notarize macOs installer Added a modal popup when transfering preset or memories Improvements Various improvements for preset transfer and communication with devices V 1.9.1 New Features Updated embedded firmware versions for all products Add support and parameters for KeyStep firmware 1.1.0 V 1.9.0 New Features Microlab integration KeyLab MKII : added support of USB to CV out KeyLab MKII : added acceleration on knobs Keylab MKII : added support of MMC messages Keylab MKII : Midi notes can now be assigned to sustain, expression and auxiliary pedals Improvements Improved Firmware version detection for every device V1.8.1 New features Integration of Keylab88 MKII Fixes Fix MicroFreak Factory Bank 1.1 V1.8.0 New features Integration of Microfreak Integration of Arturia USB MIDI driver for Microfreak in Windows version, allows "multi-client" MIDI handling, for Microfreak only. Integration of 2 factory preset banks for the Microfreak Improvements Improved Firmware version detection for every device Fixes MatrixBrute : Presets name, type, and characteristics can now be edited in device's area MatrixBrute : No more failure when renaming projects Matrixbrute : Interval between projects now follows scroll position properly V1.7.5 Fixes Updated embedded firmware versions for all products Various Typos corrections V 1.7.4 New Features DrumBrute Impact added to the list of devices V 1.7.3 New Features KeyLab mkII added to the list of devices MCC will recall the previous display size on reopening Fixes MatrixBrute : Factory project is now well displayed on osx 10.13 V 1.7.1 New Features Integration of MiniBrute 2 & MiniBrute 2S V 1.7.0 New Features Integration of Keylab Essential Integration of BeatStep Pro 2.0 Integration of MiniBrute Integration of MicroBrute MiniLab mk2 firmware update now expects later releases Uninstall from ASC Manual is accessible from the MCC Fixes Various BeatStep Pro fixes MIDI Console now shows events even when Sync is off Various MIDI Console fixes V 1.6.2 New Features MatrixBrute : Added VCO 1 & 2 CV 0v Offset MatrixBrute : Added Lower Part MIDI Channel MatrixBrute : Improved Sync Clock In/Out Settings Fixes MatrixBrute : Preset info properly loaded when selecting MatrixBrute in the list of devices V 1.6.1 New Features Drumbrute : added Roller/Looper section Improvements Improve tooltip message when Sync not available Failed to open device : a better workflow/popup is now provided Fixes Drumbrute : "All" has been removed from global midi channel V 1.6.0 New Features MatrixBrute added to the list of devices Fixes Updated Minilab MK2 firmware for offline update V 1.5.1 Fixes MIDI Control Center properly handles firmware updates when the computer is offline V 1.5.0 - Minilab-mkII New Features Minilab MkII added to the list of devices Fixes After a firmware update, MCC displays properly device settings No more crashes if drumbrute is disconnected while transferring data V 1.4.0 - DrumBrute New Features DrumBrute added to the list of devices Fixes Improved memory handling for MiniLab - Sync or Working Memory manipulations created issues Updated BeatStep firmware for offline update Devices are now not editable when in firmware update mode It is now possible to read the connected device's firmware version after an update of the MCC V 1.3.2 Fixes Beatstep : wrong embedded FW V 1.3.1 New Features Keystep : add courbe "soft" for aftertouch issue Keystep : set popup to update fw if version smaller Keystep : update fw reboot message Fixes Auto-Update : Updater tool is missing mouseUp/mouseDrag bad handled on Mac BeatStep Pro : update FW indicator issue Keylab 88 : missing value for pad velocity curve Keylab 88 : Snap button as KBD memory - memory number default value is wrong V 1.3.0 - KeyStep New Features KeyStep added to the list of devices KeyLab88 : velocity curves Fixes BeatStep pro : Crash when editing step Importing device settings, impossible to find the file to import User template(s) missing 's' Button configuration no more available Limit zoom out in piano roll and drum roll V 1.2.2 New Features BeatStep pro : Add Wait To Load Pattern function Fixes BeatStep pro : wrong global settings at opening BeatStep pro : Wrong param id Seq2 Hz/V 1V MIDI Note BeatStep pro : New factory preset (MIDI&USB, Wait to load ON, Pas to Midi Channel USER) BeatStep pro : "Device not connected" pop up when BSP not connected V 1.2.1 Fixes BeatStep pro : Remove Sync feature on BSP Update FW recalling update popup BeatStep pro : set drum map range to [0,127] BeatStep pro : inversion Seq1 Gate et Seq 2 Pitch KeyLab 88 : update (transpose, bank MSB for pads, sustain pedal threshold) Minimal Required version popup : 1.1.0.4 for KL88, 1.1.2.0 for BSP V 1.2.0 - BeatStepPro New Features Auto-Update MCC Automatic download of latest firmware HW Test interface BeatStepPro support : piano roll support bulks partial transfert of parameters from computer to device device global parameters V 1.1.0 - BeatStep New Features BeatStep support. Edit your sequences and user scales directly in the MIDI Control Center. V 1.0.1 Fixes Mac 10.9 and Windows 8: Some devices were not properly seen as connected or the communication failed. If you experienced this bug on Mac 10.9, you might have to open Audio MIDI Setup and remove the MIDI Devices that had this problem.
Win 7+	Midi Control Center	03-Apr-2020	26.8 Mb	1.11.0.1513	MIDI Control Center V 1.11.0 New Features KeyStep Pro integration Fixes MatrixBrute : update pop-up message is now fixed Matrixbrute : regeneration does not oscillate anymore on some presets Progress bar now better reflect the real firmware loading progress V 1.10.1 New Features KeyLab Essential 88 integration Microfreak firmware 2.0.3 integration Added "Factory 2.0" presets bank for the Microfreak Added relative bend, scale, and root note settings for the Microfreak Updated embedded firmware versions for all products V 1.10.0 New Features Added MatrixBrute Factory 2.0 bank for MCC MatrixBrute 2.0 Firmware integration Catalina compatibility: Notarize macOs installer Added a modal popup when transfering preset or memories Improvements Various improvements for preset transfer and communication with devices V 1.9.1 New Features Updated embedded firmware versions for all products Add support and parameters for KeyStep firmware 1.1.0 V 1.9.0 New Features Microlab integration KeyLab MKII : added support of USB to CV out KeyLab MKII : added acceleration on knobs Keylab MKII : added support of MMC messages Keylab MKII : Midi notes can now be assigned to sustain, expression and auxiliary pedals Improvements Improved Firmware version detection for every device V1.8.1 New features Integration of Keylab88 MKII Fixes Fix MicroFreak Factory Bank 1.1 V1.8.0 New features Integration of Microfreak Integration of Arturia USB MIDI driver for Microfreak in Windows version, allows "multi-client" MIDI handling, for Microfreak only. Integration of 2 factory preset banks for the Microfreak Improvements Improved Firmware version detection for every device Fixes MatrixBrute : Presets name, type, and characteristics can now be edited in device's area MatrixBrute : No more failure when renaming projects Matrixbrute : Interval between projects now follows scroll position properly V1.7.5 Fixes Updated embedded firmware versions for all products Various Typos corrections V 1.7.4 New Features DrumBrute Impact added to the list of devices V 1.7.3 New Features KeyLab mkII added to the list of devices MCC will recall the previous display size on reopening Fixes MatrixBrute : Factory project is now well displayed on osx 10.13 V 1.7.1 New Features Integration of MiniBrute 2 & MiniBrute 2S V 1.7.0 New Features Integration of Keylab Essential Integration of BeatStep Pro 2.0 Integration of MiniBrute Integration of MicroBrute MiniLab mk2 firmware update now expects later releases Uninstall from ASC Manual is accessible from the MCC Fixes Various BeatStep Pro fixes MIDI Console now shows events even when Sync is off Various MIDI Console fixes V 1.6.2 New Features MatrixBrute : Added VCO 1 & 2 CV 0v Offset MatrixBrute : Added Lower Part MIDI Channel MatrixBrute : Improved Sync Clock In/Out Settings Fixes MatrixBrute : Preset info properly loaded when selecting MatrixBrute in the list of devices V 1.6.1 New Features Drumbrute : added Roller/Looper section Improvements Improve tooltip message when Sync not available Failed to open device : a better workflow/popup is now provided Fixes Drumbrute : "All" has been removed from global midi channel V 1.6.0 New Features MatrixBrute added to the list of devices Fixes Updated Minilab MK2 firmware for offline update V 1.5.1 Fixes MIDI Control Center properly handles firmware updates when the computer is offline V 1.5.0 - Minilab-mkII New Features Minilab MkII added to the list of devices Fixes After a firmware update, MCC displays properly device settings No more crashes if drumbrute is disconnected while transferring data V 1.4.0 - DrumBrute New Features DrumBrute added to the list of devices Fixes Improved memory handling for MiniLab - Sync or Working Memory manipulations created issues Updated BeatStep firmware for offline update Devices are now not editable when in firmware update mode It is now possible to read the connected device's firmware version after an update of the MCC V 1.3.2 Fixes Beatstep : wrong embedded FW V 1.3.1 New Features Keystep : add courbe "soft" for aftertouch issue Keystep : set popup to update fw if version smaller Keystep : update fw reboot message Fixes Auto-Update : Updater tool is missing mouseUp/mouseDrag bad handled on Mac BeatStep Pro : update FW indicator issue Keylab 88 : missing value for pad velocity curve Keylab 88 : Snap button as KBD memory - memory number default value is wrong V 1.3.0 - KeyStep New Features KeyStep added to the list of devices KeyLab88 : velocity curves Fixes BeatStep pro : Crash when editing step Importing device settings, impossible to find the file to import User template(s) missing 's' Button configuration no more available Limit zoom out in piano roll and drum roll V 1.2.2 New Features BeatStep pro : Add Wait To Load Pattern function Fixes BeatStep pro : wrong global settings at opening BeatStep pro : Wrong param id Seq2 Hz/V 1V MIDI Note BeatStep pro : New factory preset (MIDI&USB, Wait to load ON, Pas to Midi Channel USER) BeatStep pro : "Device not connected" pop up when BSP not connected V 1.2.1 Fixes BeatStep pro : Remove Sync feature on BSP Update FW recalling update popup BeatStep pro : set drum map range to [0,127] BeatStep pro : inversion Seq1 Gate et Seq 2 Pitch KeyLab 88 : update (transpose, bank MSB for pads, sustain pedal threshold) Minimal Required version popup : 1.1.0.4 for KL88, 1.1.2.0 for BSP V 1.2.0 - BeatStepPro New Features Auto-Update MCC Automatic download of latest firmware HW Test interface BeatStepPro support : piano roll support bulks partial transfert of parameters from computer to device device global parameters V 1.1.0 - BeatStep New Features BeatStep support. Edit your sequences and user scales directly in the MIDI Control Center. V 1.0.1 Fixes Mac 10.9 and Windows 8: Some devices were not properly seen as connected or the communication failed. If you experienced this bug on Mac 10.9, you might have to open Audio MIDI Setup and remove the MIDI Devices that had this problem.
10.10+	Midi Control Center	03-Apr-2020	35.5 Mb	1.11.0.1513	MIDI Control Center V 1.11.0 New Features KeyStep Pro integration Fixes MatrixBrute : update pop-up message is now fixed Matrixbrute : regeneration does not oscillate anymore on some presets Progress bar now better reflect the real firmware loading progress V 1.10.1 New Features KeyLab Essential 88 integration Microfreak firmware 2.0.3 integration Added "Factory 2.0" presets bank for the Microfreak Added relative bend, scale, and root note settings for the Microfreak Updated embedded firmware versions for all products V 1.10.0 New Features Added MatrixBrute Factory 2.0 bank for MCC MatrixBrute 2.0 Firmware integration Catalina compatibility: Notarize macOs installer Added a modal popup when transfering preset or memories Improvements Various improvements for preset transfer and communication with devices V 1.9.1 New Features Updated embedded firmware versions for all products Add support and parameters for KeyStep firmware 1.1.0 V 1.9.0 New Features Microlab integration KeyLab MKII : added support of USB to CV out KeyLab MKII : added acceleration on knobs Keylab MKII : added support of MMC messages Keylab MKII : Midi notes can now be assigned to sustain, expression and auxiliary pedals Improvements Improved Firmware version detection for every device V1.8.1 New features Integration of Keylab88 MKII Fixes Fix MicroFreak Factory Bank 1.1 V1.8.0 New features Integration of Microfreak Integration of Arturia USB MIDI driver for Microfreak in Windows version, allows "multi-client" MIDI handling, for Microfreak only. Integration of 2 factory preset banks for the Microfreak Improvements Improved Firmware version detection for every device Fixes MatrixBrute : Presets name, type, and characteristics can now be edited in device's area MatrixBrute : No more failure when renaming projects Matrixbrute : Interval between projects now follows scroll position properly V1.7.5 Fixes Updated embedded firmware versions for all products Various Typos corrections V 1.7.4 New Features DrumBrute Impact added to the list of devices V 1.7.3 New Features KeyLab mkII added to the list of devices MCC will recall the previous display size on reopening Fixes MatrixBrute : Factory project is now well displayed on osx 10.13 V 1.7.1 New Features Integration of MiniBrute 2 & MiniBrute 2S V 1.7.0 New Features Integration of Keylab Essential Integration of BeatStep Pro 2.0 Integration of MiniBrute Integration of MicroBrute MiniLab mk2 firmware update now expects later releases Uninstall from ASC Manual is accessible from the MCC Fixes Various BeatStep Pro fixes MIDI Console now shows events even when Sync is off Various MIDI Console fixes V 1.6.2 New Features MatrixBrute : Added VCO 1 & 2 CV 0v Offset MatrixBrute : Added Lower Part MIDI Channel MatrixBrute : Improved Sync Clock In/Out Settings Fixes MatrixBrute : Preset info properly loaded when selecting MatrixBrute in the list of devices V 1.6.1 New Features Drumbrute : added Roller/Looper section Improvements Improve tooltip message when Sync not available Failed to open device : a better workflow/popup is now provided Fixes Drumbrute : "All" has been removed from global midi channel V 1.6.0 New Features MatrixBrute added to the list of devices Fixes Updated Minilab MK2 firmware for offline update V 1.5.1 Fixes MIDI Control Center properly handles firmware updates when the computer is offline V 1.5.0 - Minilab-mkII New Features Minilab MkII added to the list of devices Fixes After a firmware update, MCC displays properly device settings No more crashes if drumbrute is disconnected while transferring data V 1.4.0 - DrumBrute New Features DrumBrute added to the list of devices Fixes Improved memory handling for MiniLab - Sync or Working Memory manipulations created issues Updated BeatStep firmware for offline update Devices are now not editable when in firmware update mode It is now possible to read the connected device's firmware version after an update of the MCC V 1.3.2 Fixes Beatstep : wrong embedded FW V 1.3.1 New Features Keystep : add courbe "soft" for aftertouch issue Keystep : set popup to update fw if version smaller Keystep : update fw reboot message Fixes Auto-Update : Updater tool is missing mouseUp/mouseDrag bad handled on Mac BeatStep Pro : update FW indicator issue Keylab 88 : missing value for pad velocity curve Keylab 88 : Snap button as KBD memory - memory number default value is wrong V 1.3.0 - KeyStep New Features KeyStep added to the list of devices KeyLab88 : velocity curves Fixes BeatStep pro : Crash when editing step Importing device settings, impossible to find the file to import User template(s) missing 's' Button configuration no more available Limit zoom out in piano roll and drum roll V 1.2.2 New Features BeatStep pro : Add Wait To Load Pattern function Fixes BeatStep pro : wrong global settings at opening BeatStep pro : Wrong param id Seq2 Hz/V 1V MIDI Note BeatStep pro : New factory preset (MIDI&USB, Wait to load ON, Pas to Midi Channel USER) BeatStep pro : "Device not connected" pop up when BSP not connected V 1.2.1 Fixes BeatStep pro : Remove Sync feature on BSP Update FW recalling update popup BeatStep pro : set drum map range to [0,127] BeatStep pro : inversion Seq1 Gate et Seq 2 Pitch KeyLab 88 : update (transpose, bank MSB for pads, sustain pedal threshold) Minimal Required version popup : 1.1.0.4 for KL88, 1.1.2.0 for BSP V 1.2.0 - BeatStepPro New Features Auto-Update MCC Automatic download of latest firmware HW Test interface BeatStepPro support : piano roll support bulks partial transfert of parameters from computer to device device global parameters V 1.1.0 - BeatStep New Features BeatStep support. Edit your sequences and user scales directly in the MIDI Control Center. V 1.0.1 Fixes Mac 10.9 and Windows 8: Some devices were not properly seen as connected or the communication failed. If you experienced this bug on Mac 10.9, you might have to open Audio MIDI Setup and remove the MIDI Devices that had this problem.
Win 7+	Midi Control Center	16-Jan-2020	26.1 Mb	1.10.1.1411	MIDI Control Center V 1.10.1 New Features KeyLab Essential 88 integration Microfreak firmware 2.0.3 integration Added "Factory 2.0" presets bank for the Microfreak Added relative bend, scale, and root note settings for the Microfreak Updated embedded firmware versions for all products V 1.10.0 New Features Added MatrixBrute Factory 2.0 bank for MCC MatrixBrute 2.0 Firmware integration Catalina compatibility: Notarize macOs installer Added a modal popup when transfering preset or memories Improvements Various improvements for preset transfer and communication with devices V 1.9.1 New Features Updated embedded firmware versions for all products Add support and parameters for KeyStep firmware 1.1.0 V 1.9.0 New Features Microlab integration KeyLab MKII : added support of USB to CV out KeyLab MKII : added acceleration on knobs Keylab MKII : added support of MMC messages Keylab MKII : Midi notes can now be assigned to sustain, expression and auxiliary pedals Improvements Improved Firmware version detection for every device V1.8.1 New features Integration of Keylab88 MKII Fixes Fix MicroFreak Factory Bank 1.1 V1.8.0 New features Integration of Microfreak Integration of Arturia USB MIDI driver for Microfreak in Windows version, allows "multi-client" MIDI handling, for Microfreak only. Integration of 2 factory preset banks for the Microfreak Improvements Improved Firmware version detection for every device Fixes MatrixBrute : Presets name, type, and characteristics can now be edited in device's area MatrixBrute : No more failure when renaming projects Matrixbrute : Interval between projects now follows scroll position properly V1.7.5 Fixes Updated embedded firmware versions for all products Various Typos corrections V 1.7.4 New Features DrumBrute Impact added to the list of devices V 1.7.
10.10+	Midi Control Center	16-Jan-2020	34.3 Mb	1.10.1.1411	MIDI Control Center V 1.10.1 New Features KeyLab Essential 88 integration Microfreak firmware 2.0.3 integration Added "Factory 2.0" presets bank for the Microfreak Added relative bend, scale, and root note settings for the Microfreak Updated embedded firmware versions for all products V 1.10.0 New Features Added MatrixBrute Factory 2.0 bank for MCC MatrixBrute 2.0 Firmware integration Catalina compatibility: Notarize macOs installer Added a modal popup when transfering preset or memories Improvements Various improvements for preset transfer and communication with devices V 1.9.1 New Features Updated embedded firmware versions for all products Add support and parameters for KeyStep firmware 1.1.0 V 1.9.0 New Features Microlab integration KeyLab MKII : added support of USB to CV out KeyLab MKII : added acceleration on knobs Keylab MKII : added support of MMC messages Keylab MKII : Midi notes can now be assigned to sustain, expression and auxiliary pedals Improvements Improved Firmware version detection for every device V1.8.1 New features Integration of Keylab88 MKII Fixes Fix MicroFreak Factory Bank 1.1 V1.8.0 New features Integration of Microfreak Integration of Arturia USB MIDI driver for Microfreak in Windows version, allows "multi-client" MIDI handling, for Microfreak only. Integration of 2 factory preset banks for the Microfreak Improvements Improved Firmware version detection for every device Fixes MatrixBrute : Presets name, type, and characteristics can now be edited in device's area MatrixBrute : No more failure when renaming projects Matrixbrute : Interval between projects now follows scroll position properly V1.7.5 Fixes Updated embedded firmware versions for all products Various Typos corrections V 1.7.4 New Features DrumBrute Impact added to the list of devices V 1.7.
10.10+	Midi Control Center	27-Nov-2019	34.2 Mb	1.10.0.1354	MIDI Control Center V 1.10.0 New Features Added MatrixBrute Factory 2.0 bank for MCC MatrixBrute 2.0 Firmware integration Catalina compatibility: Notarize macOs installer Added a modal popup when transfering preset or memories Improvements Various improvements for preset transfer and communication with devices V 1.9.1 New Features Updated embedded firmware versions for all products Add support and parameters for KeyStep firmware 1.1.0 V 1.9.0 New Features Microlab integration KeyLab MKII : added support of USB to CV out KeyLab MKII : added acceleration on knobs Keylab MKII : added support of MMC messages Keylab MKII : Midi notes can now be assigned to sustain, expression and auxiliary pedals Improvements Improved Firmware version detection for every device V1.8.1 New features Integration of Keylab88 MKII Fixes Fix MicroFreak Factory Bank 1.1 V1.8.0 New features Integration of Microfreak Integration of Arturia USB MIDI driver for Microfreak in Windows version, allows "multi-client" MIDI handling, for Microfreak only. Integration of 2 factory preset banks for the Microfreak Improvements Improved Firmware version detection for every device Fixes MatrixBrute : Presets name, type, and characteristics can now be edited in device's area MatrixBrute : No more failure when renaming projects Matrixbrute : Interval between projects now follows scroll position properly V1.7.5 Fixes Updated embedded firmware versions for all products Various Typos corrections V 1.7.4 New Features DrumBrute Impact added to the list of devices V 1.7.3 New Features KeyLab mkII added to the list of devices MCC will recall the previous display size on reopening Fixes MatrixBrute : Factory project is now well displayed on osx 10.13 V 1.7.1 New Features Integration of MiniBrute 2 & MiniBrute 2S V 1.7.0 New Features Integration of Keylab Essential Integration of BeatStep Pro 2.0 Integration of MiniBrute Integration of MicroBrute MiniLab mk2 firmware update now expects later releases Uninstall from ASC Manual is accessible from the MCC Fixes Various BeatStep Pro fixes MIDI Console now shows events even when Sync is off Various MIDI Console fixes V 1.6.2 New Features MatrixBrute : Added VCO 1 & 2 CV 0v Offset MatrixBrute : Added Lower Part MIDI Channel MatrixBrute : Improved Sync Clock In/Out Settings Fixes MatrixBrute : Preset info properly loaded when selecting MatrixBrute in the list of devices V 1.6.1 New Features Drumbrute : added Roller/Looper section Improvements Improve tooltip message when Sync not available Failed to open device : a better workflow/popup is now provided Fixes Drumbrute : "All" has been removed from global midi channel V 1.6.0 New Features MatrixBrute added to the list of devices Fixes Updated Minilab MK2 firmware for offline update V 1.5.1 Fixes MIDI Control Center properly handles firmware updates when the computer is offline V 1.5.0 - Minilab-mkII New Features Minilab MkII added to the list of devices Fixes After a firmware update, MCC displays properly device settings No more crashes if drumbrute is disconnected while transferring data V 1.4.0 - DrumBrute New Features DrumBrute added to the list of devices Fixes Improved memory handling for MiniLab - Sync or Working Memory manipulations created issues Updated BeatStep firmware for offline update Devices are now not editable when in firmware update mode It is now possible to read the connected device's firmware version after an update of the MCC V 1.3.2 Fixes Beatstep : wrong embedded FW V 1.3.1 New Features Keystep : add courbe "soft" for aftertouch issue Keystep : set popup to update fw if version smaller Keystep : update fw reboot message Fixes Auto-Update : Updater tool is missing mouseUp/mouseDrag bad handled on Mac BeatStep Pro : update FW indicator issue Keylab 88 : missing value for pad velocity curve Keylab 88 : Snap button as KBD memory - memory number default value is wrong V 1.3.0 - KeyStep New Features KeyStep added to the list of devices KeyLab88 : velocity curves Fixes BeatStep pro : Crash when editing step Importing device settings, impossible to find the file to import User template(s) missing 's' Button configuration no more available Limit zoom out in piano roll and drum roll V 1.2.2 New Features BeatStep pro : Add Wait To Load Pattern function Fixes BeatStep pro : wrong global settings at opening BeatStep pro : Wrong param id Seq2 Hz/V 1V MIDI Note BeatStep pro : New factory preset (MIDI&USB, Wait to load ON, Pas to Midi Channel USER) BeatStep pro : "Device not connected" pop up when BSP not connected V 1.2.1 Fixes BeatStep pro : Remove Sync feature on BSP Update FW recalling update popup BeatStep pro : set drum map range to [0,127] BeatStep pro : inversion Seq1 Gate et Seq 2 Pitch KeyLab 88 : update (transpose, bank MSB for pads, sustain pedal threshold) Minimal Required version popup : 1.1.0.4 for KL88, 1.1.2.0 for BSP V 1.2.0 - BeatStepPro New Features Auto-Update MCC Automatic download of latest firmware HW Test interface BeatStepPro support : piano roll support bulks partial transfert of parameters from computer to device device global parameters V 1.1.0 - BeatStep New Features BeatStep support. Edit your sequences and user scales directly in the MIDI Control Center. V 1.0.1 Fixes Mac 10.9 and Windows 8: Some devices were not properly seen as connected or the communication failed. If you experienced this bug on Mac 10.9, you might have to open Audio MIDI Setup and remove the MIDI Devices that had this problem.
Win 7+	Midi Control Center	27-Nov-2019	25.9 Mb	1.10.0.1354	MIDI Control Center V 1.10.0 New Features Added MatrixBrute Factory 2.0 bank for MCC MatrixBrute 2.0 Firmware integration Catalina compatibility: Notarize macOs installer Added a modal popup when transfering preset or memories Improvements Various improvements for preset transfer and communication with devices V 1.9.1 New Features Updated embedded firmware versions for all products Add support and parameters for KeyStep firmware 1.1.0 V 1.9.0 New Features Microlab integration KeyLab MKII : added support of USB to CV out KeyLab MKII : added acceleration on knobs Keylab MKII : added support of MMC messages Keylab MKII : Midi notes can now be assigned to sustain, expression and auxiliary pedals Improvements Improved Firmware version detection for every device V1.8.1 New features Integration of Keylab88 MKII Fixes Fix MicroFreak Factory Bank 1.1 V1.8.0 New features Integration of Microfreak Integration of Arturia USB MIDI driver for Microfreak in Windows version, allows "multi-client" MIDI handling, for Microfreak only. Integration of 2 factory preset banks for the Microfreak Improvements Improved Firmware version detection for every device Fixes MatrixBrute : Presets name, type, and characteristics can now be edited in device's area MatrixBrute : No more failure when renaming projects Matrixbrute : Interval between projects now follows scroll position properly V1.7.5 Fixes Updated embedded firmware versions for all products Various Typos corrections V 1.7.4 New Features DrumBrute Impact added to the list of devices V 1.7.3 New Features KeyLab mkII added to the list of devices MCC will recall the previous display size on reopening Fixes MatrixBrute : Factory project is now well displayed on osx 10.13 V 1.7.1 New Features Integration of MiniBrute 2 & MiniBrute 2S V 1.7.0 New Features Integration of Keylab Essential Integration of BeatStep Pro 2.0 Integration of MiniBrute Integration of MicroBrute MiniLab mk2 firmware update now expects later releases Uninstall from ASC Manual is accessible from the MCC Fixes Various BeatStep Pro fixes MIDI Console now shows events even when Sync is off Various MIDI Console fixes V 1.6.2 New Features MatrixBrute : Added VCO 1 & 2 CV 0v Offset MatrixBrute : Added Lower Part MIDI Channel MatrixBrute : Improved Sync Clock In/Out Settings Fixes MatrixBrute : Preset info properly loaded when selecting MatrixBrute in the list of devices V 1.6.1 New Features Drumbrute : added Roller/Looper section Improvements Improve tooltip message when Sync not available Failed to open device : a better workflow/popup is now provided Fixes Drumbrute : "All" has been removed from global midi channel V 1.6.0 New Features MatrixBrute added to the list of devices Fixes Updated Minilab MK2 firmware for offline update V 1.5.1 Fixes MIDI Control Center properly handles firmware updates when the computer is offline V 1.5.0 - Minilab-mkII New Features Minilab MkII added to the list of devices Fixes After a firmware update, MCC displays properly device settings No more crashes if drumbrute is disconnected while transferring data V 1.4.0 - DrumBrute New Features DrumBrute added to the list of devices Fixes Improved memory handling for MiniLab - Sync or Working Memory manipulations created issues Updated BeatStep firmware for offline update Devices are now not editable when in firmware update mode It is now possible to read the connected device's firmware version after an update of the MCC V 1.3.2 Fixes Beatstep : wrong embedded FW V 1.3.1 New Features Keystep : add courbe "soft" for aftertouch issue Keystep : set popup to update fw if version smaller Keystep : update fw reboot message Fixes Auto-Update : Updater tool is missing mouseUp/mouseDrag bad handled on Mac BeatStep Pro : update FW indicator issue Keylab 88 : missing value for pad velocity curve Keylab 88 : Snap button as KBD memory - memory number default value is wrong V 1.3.0 - KeyStep New Features KeyStep added to the list of devices KeyLab88 : velocity curves Fixes BeatStep pro : Crash when editing step Importing device settings, impossible to find the file to import User template(s) missing 's' Button configuration no more available Limit zoom out in piano roll and drum roll V 1.2.2 New Features BeatStep pro : Add Wait To Load Pattern function Fixes BeatStep pro : wrong global settings at opening BeatStep pro : Wrong param id Seq2 Hz/V 1V MIDI Note BeatStep pro : New factory preset (MIDI&USB, Wait to load ON, Pas to Midi Channel USER) BeatStep pro : "Device not connected" pop up when BSP not connected V 1.2.1 Fixes BeatStep pro : Remove Sync feature on BSP Update FW recalling update popup BeatStep pro : set drum map range to [0,127] BeatStep pro : inversion Seq1 Gate et Seq 2 Pitch KeyLab 88 : update (transpose, bank MSB for pads, sustain pedal threshold) Minimal Required version popup : 1.1.0.4 for KL88, 1.1.2.0 for BSP V 1.2.0 - BeatStepPro New Features Auto-Update MCC Automatic download of latest firmware HW Test interface BeatStepPro support : piano roll support bulks partial transfert of parameters from computer to device device global parameters V 1.1.0 - BeatStep New Features BeatStep support. Edit your sequences and user scales directly in the MIDI Control Center. V 1.0.1 Fixes Mac 10.9 and Windows 8: Some devices were not properly seen as connected or the communication failed. If you experienced this bug on Mac 10.9, you might have to open Audio MIDI Setup and remove the MIDI Devices that had this problem.
10.8+	Midi Control Center	05-Feb-2018	38.4 Mb	1.7.1.506	MIDI Control Center V 1.7.1 New Features Integration of MiniBrute 2 & MiniBrute 2S V 1.7.0 New Features Integration of Keylab Essential Integration of BeatStep Pro 2.0 Integration of MiniBrute Integration of MicroBrute MiniLab mk2 firmware update now expects later releases Uninstall from ASC Manual is accessible from the MCC Fixes Various BeatStep Pro fixes MIDI Console now shows events even when Sync is off Various MIDI Console fixes V 1.6.2 New Features MatrixBrute : Added VCO 1 & 2 CV 0v Offset MatrixBrute : Added Lower Part MIDI Channel MatrixBrute : Improved Sync Clock In/Out Settings Fixes MatrixBrute : Preset info properly loaded when selecting MatrixBrute in the list of devices V 1.6.1 New Features Drumbrute : added Roller/Looper section Improvements Improve tooltip message when Sync not available Failed to open device : a better workflow/popup is now provided Fixes Drumbrute : "All" has been removed from global midi channel V 1.6.0 New Features MatrixBrute added to the list of devices Fixes Updated Minilab MK2 firmware for offline update V 1.5.1 Fixes MIDI Control Center properly handles firmware updates when the computer is offline V 1.5.0 - Minilab-mkII New Features Minilab MkII added to the list of devices Fixes After a firmware update, MCC displays properly device settings No more crashes if drumbrute is disconnected while transferring data V 1.4.0 - DrumBrute New Features DrumBrute added to the list of devices Fixes Improved memory handling for MiniLab - Sync or Working Memory manipulations created issues Updated BeatStep firmware for offline update Devices are now not editable when in firmware update mode It is now possible to read the connected device's firmware version after an update of the MCC V 1.3.2 Fixes Beatstep : wrong embedded FW V 1.3.1 New Features Keystep : add courbe "soft" for aftertouch issue Keystep : set popup to update fw if version smaller Keystep : update fw reboot message Fixes Auto-Update : Updater tool is missing mouseUp/mouseDrag bad handled on Mac BeatStep Pro : update FW indicator issue Keylab 88 : missing value for pad velocity curve Keylab 88 : Snap button as KBD memory - memory number default value is wrong V 1.3.0 - KeyStep New Features KeyStep added to the list of devices KeyLab88 : velocity curves Fixes BeatStep pro : Crash when editing step Importing device settings, impossible to find the file to import User template(s) missing 's' Button configuration no more available Limit zoom out in piano roll and drum roll V 1.2.2 New Features BeatStep pro : Add Wait To Load Pattern function Fixes BeatStep pro : wrong global settings at opening BeatStep pro : Wrong param id Seq2 Hz/V 1V MIDI Note BeatStep pro : New factory preset (MIDI&USB, Wait to load ON, Pas to Midi Channel USER) BeatStep pro : "Device not connected" pop up when BSP not connected V 1.2.1 Fixes BeatStep pro : Remove Sync feature on BSP Update FW recalling update popup BeatStep pro : set drum map range to [0,127] BeatStep pro : inversion Seq1 Gate et Seq 2 Pitch KeyLab 88 : update (transpose, bank MSB for pads, sustain pedal threshold) Minimal Required version popup : 1.1.0.4 for KL88, 1.1.2.0 for BSP V 1.2.0 - BeatStepPro New Features Auto-Update MCC Automatic download of latest firmware HW Test interface BeatStepPro support : piano roll support bulks partial transfert of parameters from computer to device device global parameters V 1.1.0 - BeatStep New Features BeatStep support. Edit your sequences and user scales directly in the MIDI Control Center. V 1.0.1 Fixes Mac 10.9 and Windows 8: Some devices were not properly seen as connected or the communication failed. If you experienced this bug on Mac 10.9, you might have to open Audio MIDI Setup and remove the MIDI Devices that had this problem.
Win 7+	Midi Control Center	05-Feb-2018	19.4 Mb	1.7.1.506	MIDI Control Center V 1.7.1 New Features Integration of MiniBrute 2 & MiniBrute 2S V 1.7.0 New Features Integration of Keylab Essential Integration of BeatStep Pro 2.0 Integration of MiniBrute Integration of MicroBrute MiniLab mk2 firmware update now expects later releases Uninstall from ASC Manual is accessible from the MCC Fixes Various BeatStep Pro fixes MIDI Console now shows events even when Sync is off Various MIDI Console fixes V 1.6.2 New Features MatrixBrute : Added VCO 1 & 2 CV 0v Offset MatrixBrute : Added Lower Part MIDI Channel MatrixBrute : Improved Sync Clock In/Out Settings Fixes MatrixBrute : Preset info properly loaded when selecting MatrixBrute in the list of devices V 1.6.1 New Features Drumbrute : added Roller/Looper section Improvements Improve tooltip message when Sync not available Failed to open device : a better workflow/popup is now provided Fixes Drumbrute : "All" has been removed from global midi channel V 1.6.0 New Features MatrixBrute added to the list of devices Fixes Updated Minilab MK2 firmware for offline update V 1.5.1 Fixes MIDI Control Center properly handles firmware updates when the computer is offline V 1.5.0 - Minilab-mkII New Features Minilab MkII added to the list of devices Fixes After a firmware update, MCC displays properly device settings No more crashes if drumbrute is disconnected while transferring data V 1.4.0 - DrumBrute New Features DrumBrute added to the list of devices Fixes Improved memory handling for MiniLab - Sync or Working Memory manipulations created issues Updated BeatStep firmware for offline update Devices are now not editable when in firmware update mode It is now possible to read the connected device's firmware version after an update of the MCC V 1.3.2 Fixes Beatstep : wrong embedded FW V 1.3.1 New Features Keystep : add courbe "soft" for aftertouch issue Keystep : set popup to update fw if version smaller Keystep : update fw reboot message Fixes Auto-Update : Updater tool is missing mouseUp/mouseDrag bad handled on Mac BeatStep Pro : update FW indicator issue Keylab 88 : missing value for pad velocity curve Keylab 88 : Snap button as KBD memory - memory number default value is wrong V 1.3.0 - KeyStep New Features KeyStep added to the list of devices KeyLab88 : velocity curves Fixes BeatStep pro : Crash when editing step Importing device settings, impossible to find the file to import User template(s) missing 's' Button configuration no more available Limit zoom out in piano roll and drum roll V 1.2.2 New Features BeatStep pro : Add Wait To Load Pattern function Fixes BeatStep pro : wrong global settings at opening BeatStep pro : Wrong param id Seq2 Hz/V 1V MIDI Note BeatStep pro : New factory preset (MIDI&USB, Wait to load ON, Pas to Midi Channel USER) BeatStep pro : "Device not connected" pop up when BSP not connected V 1.2.1 Fixes BeatStep pro : Remove Sync feature on BSP Update FW recalling update popup BeatStep pro : set drum map range to [0,127] BeatStep pro : inversion Seq1 Gate et Seq 2 Pitch KeyLab 88 : update (transpose, bank MSB for pads, sustain pedal threshold) Minimal Required version popup : 1.1.0.4 for KL88, 1.1.2.0 for BSP V 1.2.0 - BeatStepPro New Features Auto-Update MCC Automatic download of latest firmware HW Test interface BeatStepPro support : piano roll support bulks partial transfert of parameters from computer to device device global parameters V 1.1.0 - BeatStep New Features BeatStep support. Edit your sequences and user scales directly in the MIDI Control Center. V 1.0.1 Fixes Mac 10.9 and Windows 8: Some devices were not properly seen as connected or the communication failed. If you experienced this bug on Mac 10.9, you might have to open Audio MIDI Setup and remove the MIDI Devices that had this problem.
10.8+	Midi Control Center	23-Jun-2017	35.7 Mb	1.7.0.217	MIDI Control Center V 1.7.0 New Features Integration of Keylab Essential Integration of BeatStep Pro 2.0 Integration of MiniBrute Integration of MicroBrute MiniLab mk2 firmware update now expects later releases Uninstall from ASC Manual is accessible from the MCC Fixes Various BeatStep Pro fixes MIDI Console now shows events even when Sync is off Various MIDI Console fixes V 1.6.2 New Features MatrixBrute : Added VCO 1 & 2 CV 0v Offset MatrixBrute : Added Lower Part MIDI Channel MatrixBrute : Improved Sync Clock In/Out Settings Fixes MatrixBrute : Preset info properly loaded when selecting MatrixBrute in the list of devices V 1.6.1 New Features Drumbrute : added Roller/Looper section Improvements Improve tooltip message when Sync not available Failed to open device : a better workflow/popup is now provided Fixes Drumbrute : "All" has been removed from global midi channel V 1.6.0 New Features MatrixBrute added to the list of devices Fixes Updated Minilab MK2 firmware for offline update V 1.5.1 Fixes MIDI Control Center properly handles firmware updates when the computer is offline V 1.5.0 - Minilab-mkII New Features Minilab MkII added to the list of devices Fixes After a firmware update, MCC displays properly device settings No more crashes if drumbrute is disconnected while transferring data V 1.4.0 - DrumBrute New Features DrumBrute added to the list of devices Fixes Improved memory handling for MiniLab - Sync or Working Memory manipulations created issues Updated BeatStep firmware for offline update Devices are now not editable when in firmware update mode It is now possible to read the connected device's firmware version after an update of the MCC V 1.3.2 Fixes Beatstep : wrong embedded FW V 1.3.1 New Features Keystep : add courbe "soft" for aftertouch issue Keystep : set popup to update fw if version smaller Keystep : update fw reboot message Fixes Auto-Update : Updater tool is missing mouseUp/mouseDrag bad handled on Mac BeatStep Pro : update FW indicator issue Keylab 88 : missing value for pad velocity curve Keylab 88 : Snap button as KBD memory - memory number default value is wrong V 1.3.0 - KeyStep New Features KeyStep added to the list of devices KeyLab88 : velocity curves Fixes BeatStep pro : Crash when editing step Importing device settings, impossible to find the file to import User template(s) missing 's' Button configuration no more available Limit zoom out in piano roll and drum roll V 1.2.2 New Features BeatStep pro : Add Wait To Load Pattern function Fixes BeatStep pro : wrong global settings at opening BeatStep pro : Wrong param id Seq2 Hz/V 1V MIDI Note BeatStep pro : New factory preset (MIDI&USB, Wait to load ON, Pas to Midi Channel USER) BeatStep pro : "Device not connected" pop up when BSP not connected V 1.2.1 Fixes BeatStep pro : Remove Sync feature on BSP Update FW recalling update popup BeatStep pro : set drum map range to [0,127] BeatStep pro : inversion Seq1 Gate et Seq 2 Pitch KeyLab 88 : update (transpose, bank MSB for pads, sustain pedal threshold) Minimal Required version popup : 1.1.0.4 for KL88, 1.1.2.0 for BSP V 1.2.0 - BeatStepPro New Features Auto-Update MCC Automatic download of latest firmware HW Test interface BeatStepPro support : piano roll support bulks partial transfert of parameters from computer to device device global parameters V 1.1.0 - BeatStep New Features BeatStep support. Edit your sequences and user scales directly in the MIDI Control Center. V 1.0.1 Fixes Mac 10.9 and Windows 8: Some devices were not properly seen as connected or the communication failed. If you experienced this bug on Mac 10.9, you might have to open Audio MIDI Setup and remove the MIDI Devices that had this problem.
Win 7+	Midi Control Center	23-Jun-2017	17.3 Mb	1.7.0.217	MIDI Control Center V 1.7.0 New Features Integration of Keylab Essential Integration of BeatStep Pro 2.0 Integration of MiniBrute Integration of MicroBrute MiniLab mk2 firmware update now expects later releases Uninstall from ASC Manual is accessible from the MCC Fixes Various BeatStep Pro fixes MIDI Console now shows events even when Sync is off Various MIDI Console fixes V 1.6.2 New Features MatrixBrute : Added VCO 1 & 2 CV 0v Offset MatrixBrute : Added Lower Part MIDI Channel MatrixBrute : Improved Sync Clock In/Out Settings Fixes MatrixBrute : Preset info properly loaded when selecting MatrixBrute in the list of devices V 1.6.1 New Features Drumbrute : added Roller/Looper section Improvements Improve tooltip message when Sync not available Failed to open device : a better workflow/popup is now provided Fixes Drumbrute : "All" has been removed from global midi channel V 1.6.0 New Features MatrixBrute added to the list of devices Fixes Updated Minilab MK2 firmware for offline update V 1.5.1 Fixes MIDI Control Center properly handles firmware updates when the computer is offline V 1.5.0 - Minilab-mkII New Features Minilab MkII added to the list of devices Fixes After a firmware update, MCC displays properly device settings No more crashes if drumbrute is disconnected while transferring data V 1.4.0 - DrumBrute New Features DrumBrute added to the list of devices Fixes Improved memory handling for MiniLab - Sync or Working Memory manipulations created issues Updated BeatStep firmware for offline update Devices are now not editable when in firmware update mode It is now possible to read the connected device's firmware version after an update of the MCC V 1.3.2 Fixes Beatstep : wrong embedded FW V 1.3.1 New Features Keystep : add courbe "soft" for aftertouch issue Keystep : set popup to update fw if version smaller Keystep : update fw reboot message Fixes Auto-Update : Updater tool is missing mouseUp/mouseDrag bad handled on Mac BeatStep Pro : update FW indicator issue Keylab 88 : missing value for pad velocity curve Keylab 88 : Snap button as KBD memory - memory number default value is wrong V 1.3.0 - KeyStep New Features KeyStep added to the list of devices KeyLab88 : velocity curves Fixes BeatStep pro : Crash when editing step Importing device settings, impossible to find the file to import User template(s) missing 's' Button configuration no more available Limit zoom out in piano roll and drum roll V 1.2.2 New Features BeatStep pro : Add Wait To Load Pattern function Fixes BeatStep pro : wrong global settings at opening BeatStep pro : Wrong param id Seq2 Hz/V 1V MIDI Note BeatStep pro : New factory preset (MIDI&USB, Wait to load ON, Pas to Midi Channel USER) BeatStep pro : "Device not connected" pop up when BSP not connected V 1.2.1 Fixes BeatStep pro : Remove Sync feature on BSP Update FW recalling update popup BeatStep pro : set drum map range to [0,127] BeatStep pro : inversion Seq1 Gate et Seq 2 Pitch KeyLab 88 : update (transpose, bank MSB for pads, sustain pedal threshold) Minimal Required version popup : 1.1.0.4 for KL88, 1.1.2.0 for BSP V 1.2.0 - BeatStepPro New Features Auto-Update MCC Automatic download of latest firmware HW Test interface BeatStepPro support : piano roll support bulks partial transfert of parameters from computer to device device global parameters V 1.1.0 - BeatStep New Features BeatStep support. Edit your sequences and user scales directly in the MIDI Control Center. V 1.0.1 Fixes Mac 10.9 and Windows 8: Some devices were not properly seen as connected or the communication failed. If you experienced this bug on Mac 10.9, you might have to open Audio MIDI Setup and remove the MIDI Devices that had this problem.
10.8+	Midi Control Center	24-Mar-2017	32.9 Mb	1.6.2.85	MIDI Control Center V 1.6.2 New Features MatrixBrute : Added VCO 1 & 2 CV 0v Offset MatrixBrute : Added Lower Part MIDI Channel MatrixBrute : Improved Sync Clock In/Out Settings Fixes MatrixBrute : Preset info properly loaded when selecting MatrixBrute in the list of devices V 1.6.1 New Features Drumbrute : added Roller/Looper section Improvements Improve tooltip message when Sync not available Failed to open device : a better workflow/popup is now provided Fixes Drumbrute : "All" has been removed from global midi channel V 1.6.0 New Features MatrixBrute added to the list of devices Fixes Updated Minilab MK2 firmware for offline update V 1.5.1 Fixes MIDI Control Center properly handles firmware updates when the computer is offline V 1.5.0 - Minilab-mkII New Features Minilab MkII added to the list of devices Fixes After a firmware update, MCC displays properly device settings No more crashes if drumbrute is disconnected while transferring data V 1.4.0 - DrumBrute New Features DrumBrute added to the list of devices Fixes Improved memory handling for MiniLab - Sync or Working Memory manipulations created issues Updated BeatStep firmware for offline update Devices are now not editable when in firmware update mode It is now possible to read the connected device's firmware version after an update of the MCC V 1.3.2 Fixes Beatstep : wrong embedded FW V 1.3.1 New Features Keystep : add courbe "soft" for aftertouch issue Keystep : set popup to update fw if version smaller Keystep : update fw reboot message Fixes Auto-Update : Updater tool is missing mouseUp/mouseDrag bad handled on Mac BeatStep Pro : update FW indicator issue Keylab 88 : missing value for pad velocity curve Keylab 88 : Snap button as KBD memory - memory number default value is wrong V 1.3.0 - KeyStep New Features KeyStep added to the list of devices KeyLab88 : velocity curves Fixes BeatStep pro : Crash when editing step Importing device settings, impossible to find the file to import User template(s) missing 's' Button configuration no more available Limit zoom out in piano roll and drum roll V 1.2.2 New Features BeatStep pro : Add Wait To Load Pattern function Fixes BeatStep pro : wrong global settings at opening BeatStep pro : Wrong param id Seq2 Hz/V 1V MIDI Note BeatStep pro : New factory preset (MIDI&USB, Wait to load ON, Pas to Midi Channel USER) BeatStep pro : "Device not connected" pop up when BSP not connected V 1.2.1 Fixes BeatStep pro : Remove Sync feature on BSP Update FW recalling update popup BeatStep pro : set drum map range to [0,127] BeatStep pro : inversion Seq1 Gate et Seq 2 Pitch KeyLab 88 : update (transpose, bank MSB for pads, sustain pedal threshold) Minimal Required version popup : 1.1.0.4 for KL88, 1.1.2.0 for BSP V 1.2.0 - BeatStepPro New Features Auto-Update MCC Automatic download of latest firmware HW Test interface BeatStepPro support : piano roll support bulks partial transfert of parameters from computer to device device global parameters V 1.1.0 - BeatStep New Features BeatStep support. Edit your sequences and user scales directly in the MIDI Control Center. V 1.0.1 Fixes Mac 10.9 and Windows 8: Some devices were not properly seen as connected or the communication failed. If you experienced this bug on Mac 10.9, you might have to open Audio MIDI Setup and remove the MIDI Devices that had this problem.
Win 7+	Midi Control Center	24-Mar-2017	14.8 Mb	1.6.2.85	MIDI Control Center V 1.6.2 New Features MatrixBrute : Added VCO 1 & 2 CV 0v Offset MatrixBrute : Added Lower Part MIDI Channel MatrixBrute : Improved Sync Clock In/Out Settings Fixes MatrixBrute : Preset info properly loaded when selecting MatrixBrute in the list of devices V 1.6.1 New Features Drumbrute : added Roller/Looper section Improvements Improve tooltip message when Sync not available Failed to open device : a better workflow/popup is now provided Fixes Drumbrute : "All" has been removed from global midi channel V 1.6.0 New Features MatrixBrute added to the list of devices Fixes Updated Minilab MK2 firmware for offline update V 1.5.1 Fixes MIDI Control Center properly handles firmware updates when the computer is offline V 1.5.0 - Minilab-mkII New Features Minilab MkII added to the list of devices Fixes After a firmware update, MCC displays properly device settings No more crashes if drumbrute is disconnected while transferring data V 1.4.0 - DrumBrute New Features DrumBrute added to the list of devices Fixes Improved memory handling for MiniLab - Sync or Working Memory manipulations created issues Updated BeatStep firmware for offline update Devices are now not editable when in firmware update mode It is now possible to read the connected device's firmware version after an update of the MCC V 1.3.2 Fixes Beatstep : wrong embedded FW V 1.3.1 New Features Keystep : add courbe "soft" for aftertouch issue Keystep : set popup to update fw if version smaller Keystep : update fw reboot message Fixes Auto-Update : Updater tool is missing mouseUp/mouseDrag bad handled on Mac BeatStep Pro : update FW indicator issue Keylab 88 : missing value for pad velocity curve Keylab 88 : Snap button as KBD memory - memory number default value is wrong V 1.3.0 - KeyStep New Features KeyStep added to the list of devices KeyLab88 : velocity curves Fixes BeatStep pro : Crash when editing step Importing device settings, impossible to find the file to import User template(s) missing 's' Button configuration no more available Limit zoom out in piano roll and drum roll V 1.2.2 New Features BeatStep pro : Add Wait To Load Pattern function Fixes BeatStep pro : wrong global settings at opening BeatStep pro : Wrong param id Seq2 Hz/V 1V MIDI Note BeatStep pro : New factory preset (MIDI&USB, Wait to load ON, Pas to Midi Channel USER) BeatStep pro : "Device not connected" pop up when BSP not connected V 1.2.1 Fixes BeatStep pro : Remove Sync feature on BSP Update FW recalling update popup BeatStep pro : set drum map range to [0,127] BeatStep pro : inversion Seq1 Gate et Seq 2 Pitch KeyLab 88 : update (transpose, bank MSB for pads, sustain pedal threshold) Minimal Required version popup : 1.1.0.4 for KL88, 1.1.2.0 for BSP V 1.2.0 - BeatStepPro New Features Auto-Update MCC Automatic download of latest firmware HW Test interface BeatStepPro support : piano roll support bulks partial transfert of parameters from computer to device device global parameters V 1.1.0 - BeatStep New Features BeatStep support. Edit your sequences and user scales directly in the MIDI Control Center. V 1.0.1 Fixes Mac 10.9 and Windows 8: Some devices were not properly seen as connected or the communication failed. If you experienced this bug on Mac 10.9, you might have to open Audio MIDI Setup and remove the MIDI Devices that had this problem.
Win 7+	Midi Control Center	03-Feb-2017	19.1 Mb	1.6.1.14	MIDI Control Center V 1.6.1 New Features Drumbrute : added Roller/Looper section Improvements Improve tooltip message when Sync not available Failed to open device : a better workflow/popup is now provided Fixes Drumbrute : "All" has been removed from global midi channel V 1.6.0 New Features MatrixBrute added to the list of devices Fixes Updated Minilab MK2 firmware for offline update V 1.5.1 Fixes MIDI Control Center properly handles firmware updates when the computer is offline V 1.5.0 - Minilab-mkII New Features Minilab MkII added to the list of devices Fixes After a firmware update, MCC displays properly device settings No more crashes if drumbrute is disconnected while transferring data V 1.4.0 - DrumBrute New Features DrumBrute added to the list of devices Fixes Improved memory handling for MiniLab - Sync or Working Memory manipulations created issues Updated BeatStep firmware for offline update Devices are now not editable when in firmware update mode It is now possible to read the connected device's firmware version after an update of the MCC V 1.3.2 Fixes Beatstep : wrong embedded FW V 1.3.1 New Features Keystep : add courbe "soft" for aftertouch issue Keystep : set popup to update fw if version smaller Keystep : update fw reboot message Fixes Auto-Update : Updater tool is missing mouseUp/mouseDrag bad handled on Mac BeatStep Pro : update FW indicator issue Keylab 88 : missing value for pad velocity curve Keylab 88 : Snap button as KBD memory - memory number default value is wrong V 1.3.0 - KeyStep New Features KeyStep added to the list of devices KeyLab88 : velocity curves Fixes BeatStep pro : Crash when editing step Importing device settings, impossible to find the file to import User template(s) missing 's' Button configuration no more available Limit zoom out in piano roll and drum roll V 1.2.2 New Features BeatStep pro : Add Wait To Load Pattern function Fixes BeatStep pro : wrong global settings at opening BeatStep pro : Wrong param id Seq2 Hz/V 1V MIDI Note BeatStep pro : New factory preset (MIDI&USB, Wait to load ON, Pas to Midi Channel USER) BeatStep pro : "Device not connected" pop up when BSP not connected V 1.2.1 Fixes BeatStep pro : Remove Sync feature on BSP Update FW recalling update popup BeatStep pro : set drum map range to [0,127] BeatStep pro : inversion Seq1 Gate et Seq 2 Pitch KeyLab 88 : update (transpose, bank MSB for pads, sustain pedal threshold) Minimal Required version popup : 1.1.0.4 for KL88, 1.1.2.0 for BSP V 1.2.0 - BeatStepPro New Features Auto-Update MCC Automatic download of latest firmware HW Test interface BeatStepPro support : piano roll support bulks partial transfert of parameters from computer to device device global parameters V 1.1.0 - BeatStep New Features BeatStep support. Edit your sequences and user scales directly in the MIDI Control Center. V 1.0.1 Fixes Mac 10.9 and Windows 8: Some devices were not properly seen as connected or the communication failed. If you experienced this bug on Mac 10.9, you might have to open Audio MIDI Setup and remove the MIDI Devices that had this problem.
10.8+	Midi Control Center	03-Feb-2017	37.6 Mb	1.6.1.14	MIDI Control Center V 1.6.1 New Features Drumbrute : added Roller/Looper section Improvements Improve tooltip message when Sync not available Failed to open device : a better workflow/popup is now provided Fixes Drumbrute : "All" has been removed from global midi channel V 1.6.0 New Features MatrixBrute added to the list of devices Fixes Updated Minilab MK2 firmware for offline update V 1.5.1 Fixes MIDI Control Center properly handles firmware updates when the computer is offline V 1.5.0 - Minilab-mkII New Features Minilab MkII added to the list of devices Fixes After a firmware update, MCC displays properly device settings No more crashes if drumbrute is disconnected while transferring data V 1.4.0 - DrumBrute New Features DrumBrute added to the list of devices Fixes Improved memory handling for MiniLab - Sync or Working Memory manipulations created issues Updated BeatStep firmware for offline update Devices are now not editable when in firmware update mode It is now possible to read the connected device's firmware version after an update of the MCC V 1.3.2 Fixes Beatstep : wrong embedded FW V 1.3.1 New Features Keystep : add courbe "soft" for aftertouch issue Keystep : set popup to update fw if version smaller Keystep : update fw reboot message Fixes Auto-Update : Updater tool is missing mouseUp/mouseDrag bad handled on Mac BeatStep Pro : update FW indicator issue Keylab 88 : missing value for pad velocity curve Keylab 88 : Snap button as KBD memory - memory number default value is wrong V 1.3.0 - KeyStep New Features KeyStep added to the list of devices KeyLab88 : velocity curves Fixes BeatStep pro : Crash when editing step Importing device settings, impossible to find the file to import User template(s) missing 's' Button configuration no more available Limit zoom out in piano roll and drum roll V 1.2.2 New Features BeatStep pro : Add Wait To Load Pattern function Fixes BeatStep pro : wrong global settings at opening BeatStep pro : Wrong param id Seq2 Hz/V 1V MIDI Note BeatStep pro : New factory preset (MIDI&USB, Wait to load ON, Pas to Midi Channel USER) BeatStep pro : "Device not connected" pop up when BSP not connected V 1.2.1 Fixes BeatStep pro : Remove Sync feature on BSP Update FW recalling update popup BeatStep pro : set drum map range to [0,127] BeatStep pro : inversion Seq1 Gate et Seq 2 Pitch KeyLab 88 : update (transpose, bank MSB for pads, sustain pedal threshold) Minimal Required version popup : 1.1.0.4 for KL88, 1.1.2.0 for BSP V 1.2.0 - BeatStepPro New Features Auto-Update MCC Automatic download of latest firmware HW Test interface BeatStepPro support : piano roll support bulks partial transfert of parameters from computer to device device global parameters V 1.1.0 - BeatStep New Features BeatStep support. Edit your sequences and user scales directly in the MIDI Control Center. V 1.0.1 Fixes Mac 10.9 and Windows 8: Some devices were not properly seen as connected or the communication failed. If you experienced this bug on Mac 10.9, you might have to open Audio MIDI Setup and remove the MIDI Devices that had this problem.
10.8+	Midi Control Center	21-Dec-2016	37.6 Mb	1.6.0.921	MIDI Control Center V 1.6.0 New Features MatrixBrute added to the list of devices Fixes Updated Minilab MK2 firmware for offline update V 1.5.1 Fixes MIDI Control Center properly handles firmware updates when the computer is offline V 1.5.0 - Minilab-mkII New Features Minilab MkII added to the list of devices Fixes After a firmware update, MCC displays properly device settings No more crashes if drumbrute is disconnected while transferring data V 1.4.0 - DrumBrute New Features DrumBrute added to the list of devices Fixes Improved memory handling for MiniLab - Sync or Working Memory manipulations created issues Updated BeatStep firmware for offline update Devices are now not editable when in firmware update mode It is now possible to read the connected device's firmware version after an update of the MCC V 1.3.2 Fixes Beatstep : wrong embedded FW V 1.3.1 New Features Keystep : add courbe "soft" for aftertouch issue Keystep : set popup to update fw if version smaller Keystep : update fw reboot message Fixes Auto-Update : Updater tool is missing mouseUp/mouseDrag bad handled on Mac BeatStep Pro : update FW indicator issue Keylab 88 : missing value for pad velocity curve Keylab 88 : Snap button as KBD memory - memory number default value is wrong V 1.3.0 - KeyStep New Features KeyStep added to the list of devices KeyLab88 : velocity curves Fixes BeatStep pro : Crash when editing step Importing device settings, impossible to find the file to import User template(s) missing 's' Button configuration no more available Limit zoom out in piano roll and drum roll V 1.2.2 New Features BeatStep pro : Add Wait To Load Pattern function Fixes BeatStep pro : wrong global settings at opening BeatStep pro : Wrong param id Seq2 Hz/V 1V MIDI Note BeatStep pro : New factory preset (MIDI&USB, Wait to load ON, Pas to Midi Channel USER) BeatStep pro : "Device not connected" pop up when BSP not connected V 1.2.1 Fixes BeatStep pro : Remove Sync feature on BSP Update FW recalling update popup BeatStep pro : set drum map range to [0,127] BeatStep pro : inversion Seq1 Gate et Seq 2 Pitch KeyLab 88 : update (transpose, bank MSB for pads, sustain pedal threshold) Minimal Required version popup : 1.1.0.4 for KL88, 1.1.2.0 for BSP V 1.2.0 - BeatStepPro New Features Auto-Update MCC Automatic download of latest firmware HW Test interface BeatStepPro support : piano roll support bulks partial transfert of parameters from computer to device device global parameters V 1.1.0 - BeatStep New Features BeatStep support. Edit your sequences and user scales directly in the MIDI Control Center. V 1.0.1 Fixes Mac 10.9 and Windows 8: Some devices were not properly seen as connected or the communication failed. If you experienced this bug on Mac 10.9, you might have to open Audio MIDI Setup and remove the MIDI Devices that had this problem.
Win 7+	Midi Control Center	21-Dec-2016	19.2 Mb	1.6.0.921	MIDI Control Center V 1.6.0 New Features MatrixBrute added to the list of devices Fixes Updated Minilab MK2 firmware for offline update V 1.5.1 Fixes MIDI Control Center properly handles firmware updates when the computer is offline V 1.5.0 - Minilab-mkII New Features Minilab MkII added to the list of devices Fixes After a firmware update, MCC displays properly device settings No more crashes if drumbrute is disconnected while transferring data V 1.4.0 - DrumBrute New Features DrumBrute added to the list of devices Fixes Improved memory handling for MiniLab - Sync or Working Memory manipulations created issues Updated BeatStep firmware for offline update Devices are now not editable when in firmware update mode It is now possible to read the connected device's firmware version after an update of the MCC V 1.3.2 Fixes Beatstep : wrong embedded FW V 1.3.1 New Features Keystep : add courbe "soft" for aftertouch issue Keystep : set popup to update fw if version smaller Keystep : update fw reboot message Fixes Auto-Update : Updater tool is missing mouseUp/mouseDrag bad handled on Mac BeatStep Pro : update FW indicator issue Keylab 88 : missing value for pad velocity curve Keylab 88 : Snap button as KBD memory - memory number default value is wrong V 1.3.0 - KeyStep New Features KeyStep added to the list of devices KeyLab88 : velocity curves Fixes BeatStep pro : Crash when editing step Importing device settings, impossible to find the file to import User template(s) missing 's' Button configuration no more available Limit zoom out in piano roll and drum roll V 1.2.2 New Features BeatStep pro : Add Wait To Load Pattern function Fixes BeatStep pro : wrong global settings at opening BeatStep pro : Wrong param id Seq2 Hz/V 1V MIDI Note BeatStep pro : New factory preset (MIDI&USB, Wait to load ON, Pas to Midi Channel USER) BeatStep pro : "Device not connected" pop up when BSP not connected V 1.2.1 Fixes BeatStep pro : Remove Sync feature on BSP Update FW recalling update popup BeatStep pro : set drum map range to [0,127] BeatStep pro : inversion Seq1 Gate et Seq 2 Pitch KeyLab 88 : update (transpose, bank MSB for pads, sustain pedal threshold) Minimal Required version popup : 1.1.0.4 for KL88, 1.1.2.0 for BSP V 1.2.0 - BeatStepPro New Features Auto-Update MCC Automatic download of latest firmware HW Test interface BeatStepPro support : piano roll support bulks partial transfert of parameters from computer to device device global parameters V 1.1.0 - BeatStep New Features BeatStep support. Edit your sequences and user scales directly in the MIDI Control Center. V 1.0.1 Fixes Mac 10.9 and Windows 8: Some devices were not properly seen as connected or the communication failed. If you experienced this bug on Mac 10.9, you might have to open Audio MIDI Setup and remove the MIDI Devices that had this problem.
10.8+	Midi Control Center	22-Nov-2016	37 Mb	1.5.1.882	MIDI Control Center V 1.5.1 MIDI Control Center properly handles firmware updates when the computer is offline V 1.5.0 - Minilab-mkII New Features Minilab MkII added to the list of devices Fixes After a firmware update, MCC displays properly device settings No more crashes if drumbrute is disconnected while transferring data V 1.4.0 - DrumBrute New Features DrumBrute added to the list of devices Fixes Improved memory handling for MiniLab - Sync or Working Memory manipulations created issues Updated BeatStep firmware for offline update Devices are now not editable when in firmware update mode It is now possible to read the connected device's firmware version after an update of the MCC V 1.3.2 Fixes Beatstep : wrong embedded FW V 1.3.1 New Features Keystep : add courbe "soft" for aftertouch issue Keystep : set popup to update fw if version smaller Keystep : update fw reboot message Fixes Auto-Update : Updater tool is missing mouseUp/mouseDrag bad handled on Mac BeatStep Pro : update FW indicator issue Keylab 88 : missing value for pad velocity curve Keylab 88 : Snap button as KBD memory - memory number default value is wrong V 1.3.0 - KeyStep New Features KeyStep added to the list of devices KeyLab88 : velocity curves Fixes BeatStep pro : Crash when editing step Importing device settings, impossible to find the file to import User template(s) missing 's' Button configuration no more available Limit zoom out in piano roll and drum roll V 1.2.2 New Features BeatStep pro : Add Wait To Load Pattern function Fixes BeatStep pro : wrong global settings at opening BeatStep pro : Wrong param id Seq2 Hz/V 1V MIDI Note BeatStep pro : New factory preset (MIDI&USB, Wait to load ON, Pas to Midi Channel USER) BeatStep pro : "Device not connected" pop up when BSP not connected V 1.2.1 Fixes BeatStep pro : Remove Sync feature on BSP Update FW recalling update popup BeatStep pro : set drum map range to [0,127] BeatStep pro : inversion Seq1 Gate et Seq 2 Pitch KeyLab 88 : update (transpose, bank MSB for pads, sustain pedal threshold) Minimal Required version popup : 1.1.0.4 for KL88, 1.1.2.0 for BSP V 1.2.0 - BeatStepPro New Features Auto-Update MCC Automatic download of latest firmware HW Test interface BeatStepPro support : piano roll support bulks partial transfert of parameters from computer to device device global parameters V 1.1.0 - BeatStep New Features BeatStep support. Edit your sequences and user scales directly in the MIDI Control Center. V 1.0.1 Fixes Mac 10.9 and Windows 8: Some devices were not properly seen as connected or the communication failed. If you experienced this bug on Mac 10.9, you might have to open Audio MIDI Setup and remove the MIDI Devices that had this problem.
Win 7+	Midi Control Center	22-Nov-2016	18.7 Mb	1.5.1.882	MIDI Control Center V 1.5.1 MIDI Control Center properly handles firmware updates when the computer is offline V 1.5.0 - Minilab-mkII New Features Minilab MkII added to the list of devices Fixes After a firmware update, MCC displays properly device settings No more crashes if drumbrute is disconnected while transferring data V 1.4.0 - DrumBrute New Features DrumBrute added to the list of devices Fixes Improved memory handling for MiniLab - Sync or Working Memory manipulations created issues Updated BeatStep firmware for offline update Devices are now not editable when in firmware update mode It is now possible to read the connected device's firmware version after an update of the MCC V 1.3.2 Fixes Beatstep : wrong embedded FW V 1.3.1 New Features Keystep : add courbe "soft" for aftertouch issue Keystep : set popup to update fw if version smaller Keystep : update fw reboot message Fixes Auto-Update : Updater tool is missing mouseUp/mouseDrag bad handled on Mac BeatStep Pro : update FW indicator issue Keylab 88 : missing value for pad velocity curve Keylab 88 : Snap button as KBD memory - memory number default value is wrong V 1.3.0 - KeyStep New Features KeyStep added to the list of devices KeyLab88 : velocity curves Fixes BeatStep pro : Crash when editing step Importing device settings, impossible to find the file to import User template(s) missing 's' Button configuration no more available Limit zoom out in piano roll and drum roll V 1.2.2 New Features BeatStep pro : Add Wait To Load Pattern function Fixes BeatStep pro : wrong global settings at opening BeatStep pro : Wrong param id Seq2 Hz/V 1V MIDI Note BeatStep pro : New factory preset (MIDI&USB, Wait to load ON, Pas to Midi Channel USER) BeatStep pro : "Device not connected" pop up when BSP not connected V 1.2.1 Fixes BeatStep pro : Remove Sync feature on BSP Update FW recalling update popup BeatStep pro : set drum map range to [0,127] BeatStep pro : inversion Seq1 Gate et Seq 2 Pitch KeyLab 88 : update (transpose, bank MSB for pads, sustain pedal threshold) Minimal Required version popup : 1.1.0.4 for KL88, 1.1.2.0 for BSP V 1.2.0 - BeatStepPro New Features Auto-Update MCC Automatic download of latest firmware HW Test interface BeatStepPro support : piano roll support bulks partial transfert of parameters from computer to device device global parameters V 1.1.0 - BeatStep New Features BeatStep support. Edit your sequences and user scales directly in the MIDI Control Center. V 1.0.1 Fixes Mac 10.9 and Windows 8: Some devices were not properly seen as connected or the communication failed. If you experienced this bug on Mac 10.9, you might have to open Audio MIDI Setup and remove the MIDI Devices that had this problem.
10.8+	Midi Control Center	15-Nov-2016	37 Mb	1.5.0.868	MIDI Control Center V1.5.0 - Minilab-mkII New Features Minilab MkII added to the list of devices Fixes : After a firmware update, MCC displays properly device settings No more crashes if drumbrute is disconnected while transferring data V1.4.0 - DrumBrute New Features DrumBrute added to the list of devices Fixes: Improved memory handling for MiniLab - Sync or Working Memory manipulations created issues Updated BeatStep firmware for offline update Devices are now not editable when in firmware update mode It is now possible to read the connected device's firmware version after an update of the MCC V1.3.2 Fixes: Beatstep : wrong embedded FW V1.3.1 New Features: Keystep : add courbe "soft" for aftertouch issue Keystep : set popup to update fw if version smaller Keystep : update fw reboot message Fixes: Auto-Update : Updater tool is missing mouseUp/mouseDrag bad handled on Mac BeatStep Pro : update FW indicator issue Keylab 88 : missing value for pad velocity curve Keylab 88 : Snap button as KBD memory - memory number default value is wrong V1.3.0 - KeyStep New Features: KeyStep added to the list of devices KeyLab88 : velocity curves Fixes: BeatStep pro : Crash when editing step Importing device settings, impossible to find the file to import User template(s) missing 's' Button configuration no more available Limit zoom out in piano roll and drum roll V1.2.2 New Features: BeatStep pro : Add Wait To Load Pattern function Fixes: BeatStep pro : wrong global settings at opening BeatStep pro : Wrong param id Seq2 Hz/V 1V MIDI Note BeatStep pro : New factory preset (MIDI&USB, Wait to load ON, Pas to Midi Channel USER) BeatStep pro : "Device not connected" pop up when BSP not connected V1.2.1 Fixes: BeatStep pro : Remove Sync feature on BSP Update FW recalling update popup BeatStep pro : set drum map range to [0,127] BeatStep pro : inversion Seq1 Gate et Seq 2 Pitch KeyLab 88 : update (transpose, bank MSB for pads, sustain pedal threshold) Minimal Required version popup : 1.1.0.4 for KL88, 1.1.2.0 for BSP V1.2.0 - BeatStepPro New Features: Auto-Update MCC Automatic download of latest firmware HW Test interface BeatStepPro support : piano roll support bulks partial transfert of parameters from computer to device device global parameters V1.1.0 - BeatStep New Features: BeatStep support. Edit your sequences and user scales directly in the MIDI Control Center. V1.0.1 Fixes: Mac 10.9 and Windows 8: Some devices were not properly seen as connected or the communication failed. If you experienced this bug on Mac 10.9, you might have to open Audio MIDI Setup and remove the MIDI Devices that had this problem.
Win 7+	Midi Control Center	15-Nov-2016	18.8 Mb	1.5.0.868	MIDI Control Center V1.5.0 - Minilab-mkII New Features Minilab MkII added to the list of devices Fixes : After a firmware update, MCC displays properly device settings No more crashes if drumbrute is disconnected while transferring data V1.4.0 - DrumBrute New Features DrumBrute added to the list of devices Fixes: Improved memory handling for MiniLab - Sync or Working Memory manipulations created issues Updated BeatStep firmware for offline update Devices are now not editable when in firmware update mode It is now possible to read the connected device's firmware version after an update of the MCC V1.3.2 Fixes: Beatstep : wrong embedded FW V1.3.1 New Features: Keystep : add courbe "soft" for aftertouch issue Keystep : set popup to update fw if version smaller Keystep : update fw reboot message Fixes: Auto-Update : Updater tool is missing mouseUp/mouseDrag bad handled on Mac BeatStep Pro : update FW indicator issue Keylab 88 : missing value for pad velocity curve Keylab 88 : Snap button as KBD memory - memory number default value is wrong V1.3.0 - KeyStep New Features: KeyStep added to the list of devices KeyLab88 : velocity curves Fixes: BeatStep pro : Crash when editing step Importing device settings, impossible to find the file to import User template(s) missing 's' Button configuration no more available Limit zoom out in piano roll and drum roll V1.2.2 New Features: BeatStep pro : Add Wait To Load Pattern function Fixes: BeatStep pro : wrong global settings at opening BeatStep pro : Wrong param id Seq2 Hz/V 1V MIDI Note BeatStep pro : New factory preset (MIDI&USB, Wait to load ON, Pas to Midi Channel USER) BeatStep pro : "Device not connected" pop up when BSP not connected V1.2.1 Fixes: BeatStep pro : Remove Sync feature on BSP Update FW recalling update popup BeatStep pro : set drum map range to [0,127] BeatStep pro : inversion Seq1 Gate et Seq 2 Pitch KeyLab 88 : update (transpose, bank MSB for pads, sustain pedal threshold) Minimal Required version popup : 1.1.0.4 for KL88, 1.1.2.0 for BSP V1.2.0 - BeatStepPro New Features: Auto-Update MCC Automatic download of latest firmware HW Test interface BeatStepPro support : piano roll support bulks partial transfert of parameters from computer to device device global parameters V1.1.0 - BeatStep New Features: BeatStep support. Edit your sequences and user scales directly in the MIDI Control Center. V1.0.1 Fixes: Mac 10.9 and Windows 8: Some devices were not properly seen as connected or the communication failed. If you experienced this bug on Mac 10.9, you might have to open Audio MIDI Setup and remove the MIDI Devices that had this problem.
Win 7+	Midi Control Center	30-Sep-2016	18 Mb	1.4.0.790	MIDI Control Center V 1.4.0 Fixes: Improved memory handling for MiniLab - Sync or Working Memory manipulations created issues DrumBrute added to the list of devices Updated BeatStep firmware for offline update Devices are now not editable when in firmware update mode It is now possible to read the connected device's firmware version after an update of the MCC V 1.3.2 Fixes: 128455 : Beatstep : wrong embedded FW
10.8+	Midi Control Center	30-Sep-2016	36.2 Mb	1.4.0.790	MIDI Control Center V 1.4.0 Fixes: Improved memory handling for MiniLab - Sync or Working Memory manipulations created issues DrumBrute added to the list of devices Updated BeatStep firmware for offline update Devices are now not editable when in firmware update mode It is now possible to read the connected device's firmware version after an update of the MCC V 1.3.2 Fixes: 128455 : Beatstep : wrong embedded FW
10.8+	Midi Control Center	20-Jul-2016	31.7 Mb	1.3.2.673	MIDI Control Center V 1.3.2 Fixes: Beatstep : Firmware update now selects the right firmware version
Win 7+	Midi Control Center	20-Jul-2016	16.1 Mb	1.3.2.673	MIDI Control Center V 1.3.2 Fixes: Beatstep : Firmware update now selects the right firmware version
Win 7+	Midi Control Center	30-Jun-2016	16.3 Mb	1.3.1.667	MIDI Control Center V 1.3.1 New Features For Keystep add "soft" curve selection for aftertouch response Bugfixes Mouse drag is now properly handled on OSX Available firmware update information is now properly displayed For KeyLab 88, "Constant 127" Pad velocity curve is now available
10.8+	Midi Control Center	30-Jun-2016	31.7 Mb	1.3.1.667	MIDI Control Center V 1.3.1 New Features For Keystep add "soft" curve selection for aftertouch response Bugfixes Mouse drag is now properly handled on OSX Available firmware update information is now properly displayed For KeyLab 88, "Constant 127" Pad velocity curve is now available
Win 7+	Midi Control Center	30-Mar-2016	15.7 Mb	1.3.0.562	MIDI Control Center V 1.3.0 New Features KeyStep integration The user can edit custom velocity curves for KeyLab 88 Improved readability on global settings Fixed Bugs No more crash while editing a sequence step with BeatStep Pro No more error message while updating the firmware Other minor fixes on UI
10.8+	Midi Control Center	30-Mar-2016	25.9 Mb	1.3.0.562	MIDI Control Center V 1.3.0 New Features KeyStep integration The user can edit custom velocity curves for KeyLab 88 Improved readability on global settings Fixed Bugs No more crash while editing a sequence step with BeatStep Pro No more error message while updating the firmware Other minor fixes on UI
10.7+	MIDI Control Center Unified	20-Nov-2015	20.1 Mb	1.2.2.429	MIDI Control Center V 1.2.2.429 Features: BSP : Add Wait To Load Pattern function Fixes: [BSP] No more wrong global settings at opening [BSP] Correction on wrong Parameter Id Seq2 Hz/V 1V MIDI Note [BSP] New factory preset (MIDI&USB, Wait to load ON, Pas to Midi Channel USER) [BSP] Pop up ìDevice not connectedî is suppressed when BSP is not connected
Win 7+	MIDI Control Center Unified	20-Nov-2015	10.9 Mb	1.2.2.429	MIDI Control Center V 1.2.2.429 Features: BSP : Add Wait To Load Pattern function Fixes: [BSP] No more wrong global settings at opening [BSP] Correction on wrong Parameter Id Seq2 Hz/V 1V MIDI Note [BSP] New factory preset (MIDI&USB, Wait to load ON, Pas to Midi Channel USER) [BSP] Pop up ìDevice not connectedî is suppressed when BSP is not connected
10.7+	MIDI Control Center Unified	23-Sep-2015	20.1 Mb	1.2.1	MIDI Control Center V 1.2.1 Improvements: BeatStep Pro Sync function was replaced by drag and drop between device memories and local templates. Drag and drop Controller Map, Sequences, Drum Sequences separately from local templates to BeatStep Pro. Set drum map range to [0,127] for BeatStep Pro New features from KeyLab 88 version 1.1 are accessible Bug Fixes: BeatStep Pro Sequencer 1 Gate type and Sequencer 2 CV type were inverted
Win 7+	MIDI Control Center Unified	23-Sep-2015	10.9 Mb	1.2.1	MIDI Control Center V 1.2.1 Improvements: BeatStep Pro Sync function was replaced by drag and drop between device memories and local templates. Drag and drop Controller Map, Sequences, Drum Sequences separately from local templates to BeatStep Pro. Set drum map range to [0,127] for BeatStep Pro New features from KeyLab 88 version 1.1 are accessible Bug Fixes: BeatStep Pro Sequencer 1 Gate type and Sequencer 2 CV type were inverted
10.7+	MIDI Control Center Unified	01-Jul-2015	20 Mb	1.2.0.301	MIDI Control Center V 1.2.0.301 New features Full support of BeatStep Pro (firmware version V1.1.0.3)
Win 7+	MIDI Control Center Unified	01-Jul-2015	10.9 Mb	1.2.0.301	MIDI Control Center V 1.2.0.301 New features Full support of BeatStep Pro (firmware version V1.1.0.3)
10.7+	MIDI Control Center Unified	19-Mar-2014	12.4 Mb	1.1	MIDI Control Center V 1.1.0 Features: BeatStep support. Edit your sequences and user scales directly in the MIDI Control Center.
Win 7+	MIDI Control Center Unified	19-Mar-2014	9.3 Mb	1.1	MIDI Control Center V 1.1.0 Features: BeatStep support. Edit your sequences and user scales directly in the MIDI Control Center.
10.7+	MIDI Control Center Unified	21-Jan-2014	11 Mb	1.0.1	MIDI Control Center V 1.0.1 Fixes: Mac 10.9 and Windows 8: Some devices were not properly seen as connected or the communication failed. If you experienced this bug on Mac 10.9, you might have to open Audio MIDI Setup and remove the MIDI Devices that had this problem.
Win 7+	MIDI Control Center Unified	21-Jan-2014	7.9 Mb	1.0.1	MIDI Control Center V 1.0.1 Fixes: Mac 10.9 and Windows 8: Some devices were not properly seen as connected or the communication failed. If you experienced this bug on Mac 10.9, you might have to open Audio MIDI Setup and remove the MIDI Devices that had this problem.
10.7+	MIDI Control Center Unified	21-Jan-2014	10.4 Mb	1.0	MIDI Control Center V 1.0 rc1 New Features: The firmware revision of you device is now displayed directly under the Device name. Clicking on it will open the Firmware Upgrade window (equivalent to going in the menu Device>Firmware Upgrade...) Bug Fixes: Fixed a bug where the Save button would stay disabled after changing a slider value Importing a template would sometimes change the selection in the Templates list. This is no longer the case. There is now a confirmation when deleting a template. Moreover, you can now press the 'Delete' key to quickly delete a template. V 1.0 beta Compatibility. This version supports Mac OSX 10.7 and higher, and Windows 7 and Windows 8. Features: The KeyLab's firmware update is now possible. Firmware files are available on the website. SparkLE and Spark can be updated as well. The firmware files will be available on the website at release. Misc: In the Default Keylab template, the transport buttons now send MMC messages (to reflect an upcoming firmware update) V 0.9.1 Compatibility. *This version supports Mac OSX 10.7 and higher, and Windows 7 and Windows 8. Features: Firmware upgrade is now possible for the MiniLab owners. You can access it from the Device menu. You will need to download the firmware files from the MiniLab resource page on the Arturia website. The Factory controller has a new global parameter, Knob Mode, allowing to switch between Absolute and Relative. Fixes: A window positionning problem when launching the application is fixed. Some labels are corrected.
Win 7+	MIDI Control Center Unified	21-Jan-2014	7.5 Mb	1.0	MIDI Control Center V 1.0 rc1 New Features: The firmware revision of you device is now displayed directly under the Device name. Clicking on it will open the Firmware Upgrade window (equivalent to going in the menu Device>Firmware Upgrade...) Bug Fixes: Fixed a bug where the Save button would stay disabled after changing a slider value Importing a template would sometimes change the selection in the Templates list. This is no longer the case. There is now a confirmation when deleting a template. Moreover, you can now press the 'Delete' key to quickly delete a template. V 1.0 beta Compatibility. This version supports Mac OSX 10.7 and higher, and Windows 7 and Windows 8. Features: The KeyLab's firmware update is now possible. Firmware files are available on the website. SparkLE and Spark can be updated as well. The firmware files will be available on the website at release. Misc: In the Default Keylab template, the transport buttons now send MMC messages (to reflect an upcoming firmware update) V 0.9.1 Compatibility. *This version supports Mac OSX 10.7 and higher, and Windows 7 and Windows 8. Features: Firmware upgrade is now possible for the MiniLab owners. You can access it from the Device menu. You will need to download the firmware files from the MiniLab resource page on the Arturia website. The Factory controller has a new global parameter, Knob Mode, allowing to switch between Absolute and Relative. Fixes: A window positionning problem when launching the application is fixed. Some labels are corrected.

Brute Alchemy
Classic synthesis toolkit

Analog, bass, lead, vintage

Brute Alchemy Classic synthesis toolkit

Analog, bass, lead, vintage

bass lead

Contains sounds for:

MatrixBrute

32 Sounds

Free

Brute Alchemy
Classic synthesis toolkit

32 Presets

Free

Contains sounds for:

MatrixBrute

Analog, bass, lead, vintage

The base elements of synthesis, ready to be melded and combined into any song or composition. Stock up on the essential ingredients for any sonic recipe with a versatile selection of MatrixBrute patches, including glassy FM sounds, stadium prog-rock analog, the nostalgic basslines of house music, and more. Timbres inspired by the most iconic synth sounds of all time, evolved with MatrixBrute’s powerful modulation and expression controls.

bass (20) lead (12)

Main Demo

Main Demo

Singles Demo

Singles Demo
</

MatrixBrute

Analog Avant-Garde

Downloads & manuals for MatrixBrute

MatrixBrute release notes

V 2.0.2

Improvements

V 2.0.1

New features

Bugfixes

V 2.0

New features

Improvements

Bugfixes

V 1.1.0.73

New features

Improvements

Bugfixes

V 1.0.1.108

Bugfixes

V 1.0.0.97

MatrixBrute release notes

V 2.0.1

New features

Bugfixes

V 2.0

New features

Improvements

Bugfixes

V 1.1.0.73

New features

Improvements

Bugfixes

V 1.0.1.108

Bugfixes

V 1.0.0.97

MatrixBrute release notes

V 2.0

New features

Improvements

Bugfixes

V 1.1.0.73

New features

Improvements

Bugfixes

V 1.0.1.108

Bugfixes

V 1.0.0.97

MatrixBrute Firmware

V 1.1.0.73

New features

Improvements

Bugfixes

V 1.0.1.108

Bugfixes

V 1.0.0.97

MatrixBrute Firmware

V 1.0.1.108

Fixes

V 1.0.0.97

MatrixBrute Firmware

V 1.0.0.97

Midi Control Center

MIDI Control Center

V 1.9.1

New Features

V 1.9.0

New Features

Improvements

V1.8.1

New features

Fixes

V1.8.0

New features

Improvements

Fixes

V1.7.5

Fixes

V 1.7.4

New Features

V 1.7.3