Arturia - Resources

MicroBrute is a pure analog sonic powerhouse of a synth. Small in size but loaded with features.

US$349 - Buy Now

A new firmware version is available for MicroBrute!
Download the latest firmware file below and install it using the Arturia MIDI Control Center or the MicroBrute Control Center.

Downloads & manuals

MicroBrute

FIRMWARE

Platform	Name	Date	Size	Version	Infos
	New MicroBrute Firmware	06-Jul-2017	148.2 Kb	1.0.4.114	MicroBrute V 1.0.4.114 New features Added Midi Stop handling Bug fixes Various Sequencer/LFO synchronisation improvements The correct sequencer pattern is played at power on Switching sequence keeps the correct pitch Send & receive midi channel use values from 1 to 16, 17 is used as ALL channel for receive When Externally synchronized, seq rate does not change gate length anymore No more crashes when setting CC #111 at value 126 or 127 All Notes Off message is sent when switching to local control off (CC122) Gate Length (CC113) does not impact sequencer Step Size (CC107) anymore Sequences are now properly updated after loading sequences from the MCC No more LFO Saw glitches at high frequencies No more Clock bleeding when the LFO amount modified via mod wheel when synchronized externally No more ModWheel and PitchWheel conflict using external MIDI in
Win 7+	MicroBrute Connection Software / Firmware	23-Aug-2013	3.8 Mb	1.0.3.2
10.6+	MicroBrute Connection Software / Firmware	23-Aug-2013	4.2 Mb	1.0.3.2

MANUALS

Manual	Date	Size	Version
New MicroBrute English Manual	23-Aug-2013	4 Mb	1.0
New MicroBrute French Manual	23-Aug-2013	4 Mb	1.0
New MicroBrute Japanese Manual	23-Aug-2013	17.2 Mb	1.0
New MicroBrute Spanish Manual	23-Aug-2013	3.8 Mb	1.0

Midi Control Center

SOFTWARE

Platform	Name	Date	Size	Version	Infos
10.8+	New Midi Control Center	23-Jun-2017	35.7 Mb	1.7.0.217	MIDI Control Center V 1.7.0 New Features Integration of Keylab Essential Integration of BeatStep Pro 2.0 Integration of MiniBrute Integration of MicroBrute MiniLab mk2 firmware update now expects later releases Uninstall from ASC Manual is accessible from the MCC Fixes Various BeatStep Pro fixes MIDI Console now shows events even when Sync is off Various MIDI Console fixes V 1.6.2 New Features MatrixBrute : Added VCO 1 & 2 CV 0v Offset MatrixBrute : Added Lower Part MIDI Channel MatrixBrute : Improved Sync Clock In/Out Settings Fixes MatrixBrute : Preset info properly loaded when selecting MatrixBrute in the list of devices V 1.6.1 New Features Drumbrute : added Roller/Looper section Improvements Improve tooltip message when Sync not available Failed to open device : a better workflow/popup is now provided Fixes Drumbrute : "All" has been removed from global midi channel V 1.6.0 New Features MatrixBrute added to the list of devices Fixes Updated Minilab MK2 firmware for offline update V 1.5.1 Fixes MIDI Control Center properly handles firmware updates when the computer is offline V 1.5.0 - Minilab-mkII New Features Minilab MkII added to the list of devices Fixes After a firmware update, MCC displays properly device settings No more crashes if drumbrute is disconnected while transferring data V 1.4.0 - DrumBrute New Features DrumBrute added to the list of devices Fixes Improved memory handling for MiniLab - Sync or Working Memory manipulations created issues Updated BeatStep firmware for offline update Devices are now not editable when in firmware update mode It is now possible to read the connected device's firmware version after an update of the MCC V 1.3.2 Fixes Beatstep : wrong embedded FW V 1.3.1 New Features Keystep : add courbe "soft" for aftertouch issue Keystep : set popup to update fw if version smaller Keystep : update fw reboot message Fixes Auto-Update : Updater tool is missing mouseUp/mouseDrag bad handled on Mac BeatStep Pro : update FW indicator issue Keylab 88 : missing value for pad velocity curve Keylab 88 : Snap button as KBD memory - memory number default value is wrong V 1.3.0 - KeyStep New Features KeyStep added to the list of devices KeyLab88 : velocity curves Fixes BeatStep pro : Crash when editing step Importing device settings, impossible to find the file to import User template(s) missing 's' Button configuration no more available Limit zoom out in piano roll and drum roll V 1.2.2 New Features BeatStep pro : Add Wait To Load Pattern function Fixes BeatStep pro : wrong global settings at opening BeatStep pro : Wrong param id Seq2 Hz/V 1V MIDI Note BeatStep pro : New factory preset (MIDI&USB, Wait to load ON, Pas to Midi Channel USER) BeatStep pro : "Device not connected" pop up when BSP not connected V 1.2.1 Fixes BeatStep pro : Remove Sync feature on BSP Update FW recalling update popup BeatStep pro : set drum map range to [0,127] BeatStep pro : inversion Seq1 Gate et Seq 2 Pitch KeyLab 88 : update (transpose, bank MSB for pads, sustain pedal threshold) Minimal Required version popup : 1.1.0.4 for KL88, 1.1.2.0 for BSP V 1.2.0 - BeatStepPro New Features Auto-Update MCC Automatic download of latest firmware HW Test interface BeatStepPro support : piano roll support bulks partial transfert of parameters from computer to device device global parameters V 1.1.0 - BeatStep New Features BeatStep support. Edit your sequences and user scales directly in the MIDI Control Center. V 1.0.1 Fixes Mac 10.9 and Windows 8: Some devices were not properly seen as connected or the communication failed. If you experienced this bug on Mac 10.9, you might have to open Audio MIDI Setup and remove the MIDI Devices that had this problem.
Win 7+	New Midi Control Center	23-Jun-2017	17.3 Mb	1.7.0.217	MIDI Control Center V 1.7.0 New Features Integration of Keylab Essential Integration of BeatStep Pro 2.0 Integration of MiniBrute Integration of MicroBrute MiniLab mk2 firmware update now expects later releases Uninstall from ASC Manual is accessible from the MCC Fixes Various BeatStep Pro fixes MIDI Console now shows events even when Sync is off Various MIDI Console fixes V 1.6.2 New Features MatrixBrute : Added VCO 1 & 2 CV 0v Offset MatrixBrute : Added Lower Part MIDI Channel MatrixBrute : Improved Sync Clock In/Out Settings Fixes MatrixBrute : Preset info properly loaded when selecting MatrixBrute in the list of devices V 1.6.1 New Features Drumbrute : added Roller/Looper section Improvements Improve tooltip message when Sync not available Failed to open device : a better workflow/popup is now provided Fixes Drumbrute : "All" has been removed from global midi channel V 1.6.0 New Features MatrixBrute added to the list of devices Fixes Updated Minilab MK2 firmware for offline update V 1.5.1 Fixes MIDI Control Center properly handles firmware updates when the computer is offline V 1.5.0 - Minilab-mkII New Features Minilab MkII added to the list of devices Fixes After a firmware update, MCC displays properly device settings No more crashes if drumbrute is disconnected while transferring data V 1.4.0 - DrumBrute New Features DrumBrute added to the list of devices Fixes Improved memory handling for MiniLab - Sync or Working Memory manipulations created issues Updated BeatStep firmware for offline update Devices are now not editable when in firmware update mode It is now possible to read the connected device's firmware version after an update of the MCC V 1.3.2 Fixes Beatstep : wrong embedded FW V 1.3.1 New Features Keystep : add courbe "soft" for aftertouch issue Keystep : set popup to update fw if version smaller Keystep : update fw reboot message Fixes Auto-Update : Updater tool is missing mouseUp/mouseDrag bad handled on Mac BeatStep Pro : update FW indicator issue Keylab 88 : missing value for pad velocity curve Keylab 88 : Snap button as KBD memory - memory number default value is wrong V 1.3.0 - KeyStep New Features KeyStep added to the list of devices KeyLab88 : velocity curves Fixes BeatStep pro : Crash when editing step Importing device settings, impossible to find the file to import User template(s) missing 's' Button configuration no more available Limit zoom out in piano roll and drum roll V 1.2.2 New Features BeatStep pro : Add Wait To Load Pattern function Fixes BeatStep pro : wrong global settings at opening BeatStep pro : Wrong param id Seq2 Hz/V 1V MIDI Note BeatStep pro : New factory preset (MIDI&USB, Wait to load ON, Pas to Midi Channel USER) BeatStep pro : "Device not connected" pop up when BSP not connected V 1.2.1 Fixes BeatStep pro : Remove Sync feature on BSP Update FW recalling update popup BeatStep pro : set drum map range to [0,127] BeatStep pro : inversion Seq1 Gate et Seq 2 Pitch KeyLab 88 : update (transpose, bank MSB for pads, sustain pedal threshold) Minimal Required version popup : 1.1.0.4 for KL88, 1.1.2.0 for BSP V 1.2.0 - BeatStepPro New Features Auto-Update MCC Automatic download of latest firmware HW Test interface BeatStepPro support : piano roll support bulks partial transfert of parameters from computer to device device global parameters V 1.1.0 - BeatStep New Features BeatStep support. Edit your sequences and user scales directly in the MIDI Control Center. V 1.0.1 Fixes Mac 10.9 and Windows 8: Some devices were not properly seen as connected or the communication failed. If you experienced this bug on Mac 10.9, you might have to open Audio MIDI Setup and remove the MIDI Devices that had this problem.
10.8+	Midi Control Center	24-Mar-2017	32.9 Mb	1.6.2.85	MIDI Control Center V 1.6.2 New Features MatrixBrute : Added VCO 1 & 2 CV 0v Offset MatrixBrute : Added Lower Part MIDI Channel MatrixBrute : Improved Sync Clock In/Out Settings Fixes MatrixBrute : Preset info properly loaded when selecting MatrixBrute in the list of devices V 1.6.1 New Features Drumbrute : added Roller/Looper section Improvements Improve tooltip message when Sync not available Failed to open device : a better workflow/popup is now provided Fixes Drumbrute : "All" has been removed from global midi channel V 1.6.0 New Features MatrixBrute added to the list of devices Fixes Updated Minilab MK2 firmware for offline update V 1.5.1 Fixes MIDI Control Center properly handles firmware updates when the computer is offline V 1.5.0 - Minilab-mkII New Features Minilab MkII added to the list of devices Fixes After a firmware update, MCC displays properly device settings No more crashes if drumbrute is disconnected while transferring data V 1.4.0 - DrumBrute New Features DrumBrute added to the list of devices Fixes Improved memory handling for MiniLab - Sync or Working Memory manipulations created issues Updated BeatStep firmware for offline update Devices are now not editable when in firmware update mode It is now possible to read the connected device's firmware version after an update of the MCC V 1.3.2 Fixes Beatstep : wrong embedded FW V 1.3.1 New Features Keystep : add courbe "soft" for aftertouch issue Keystep : set popup to update fw if version smaller Keystep : update fw reboot message Fixes Auto-Update : Updater tool is missing mouseUp/mouseDrag bad handled on Mac BeatStep Pro : update FW indicator issue Keylab 88 : missing value for pad velocity curve Keylab 88 : Snap button as KBD memory - memory number default value is wrong V 1.3.0 - KeyStep New Features KeyStep added to the list of devices KeyLab88 : velocity curves Fixes BeatStep pro : Crash when editing step Importing device settings, impossible to find the file to import User template(s) missing 's' Button configuration no more available Limit zoom out in piano roll and drum roll V 1.2.2 New Features BeatStep pro : Add Wait To Load Pattern function Fixes BeatStep pro : wrong global settings at opening BeatStep pro : Wrong param id Seq2 Hz/V 1V MIDI Note BeatStep pro : New factory preset (MIDI&USB, Wait to load ON, Pas to Midi Channel USER) BeatStep pro : "Device not connected" pop up when BSP not connected V 1.2.1 Fixes BeatStep pro : Remove Sync feature on BSP Update FW recalling update popup BeatStep pro : set drum map range to [0,127] BeatStep pro : inversion Seq1 Gate et Seq 2 Pitch KeyLab 88 : update (transpose, bank MSB for pads, sustain pedal threshold) Minimal Required version popup : 1.1.0.4 for KL88, 1.1.2.0 for BSP V 1.2.0 - BeatStepPro New Features Auto-Update MCC Automatic download of latest firmware HW Test interface BeatStepPro support : piano roll support bulks partial transfert of parameters from computer to device device global parameters V 1.1.0 - BeatStep New Features BeatStep support. Edit your sequences and user scales directly in the MIDI Control Center. V 1.0.1 Fixes Mac 10.9 and Windows 8: Some devices were not properly seen as connected or the communication failed. If you experienced this bug on Mac 10.9, you might have to open Audio MIDI Setup and remove the MIDI Devices that had this problem.
Win 7+	Midi Control Center	24-Mar-2017	14.8 Mb	1.6.2.85	MIDI Control Center V 1.6.2 New Features MatrixBrute : Added VCO 1 & 2 CV 0v Offset MatrixBrute : Added Lower Part MIDI Channel MatrixBrute : Improved Sync Clock In/Out Settings Fixes MatrixBrute : Preset info properly loaded when selecting MatrixBrute in the list of devices V 1.6.1 New Features Drumbrute : added Roller/Looper section Improvements Improve tooltip message when Sync not available Failed to open device : a better workflow/popup is now provided Fixes Drumbrute : "All" has been removed from global midi channel V 1.6.0 New Features MatrixBrute added to the list of devices Fixes Updated Minilab MK2 firmware for offline update V 1.5.1 Fixes MIDI Control Center properly handles firmware updates when the computer is offline V 1.5.0 - Minilab-mkII New Features Minilab MkII added to the list of devices Fixes After a firmware update, MCC displays properly device settings No more crashes if drumbrute is disconnected while transferring data V 1.4.0 - DrumBrute New Features DrumBrute added to the list of devices Fixes Improved memory handling for MiniLab - Sync or Working Memory manipulations created issues Updated BeatStep firmware for offline update Devices are now not editable when in firmware update mode It is now possible to read the connected device's firmware version after an update of the MCC V 1.3.2 Fixes Beatstep : wrong embedded FW V 1.3.1 New Features Keystep : add courbe "soft" for aftertouch issue Keystep : set popup to update fw if version smaller Keystep : update fw reboot message Fixes Auto-Update : Updater tool is missing mouseUp/mouseDrag bad handled on Mac BeatStep Pro : update FW indicator issue Keylab 88 : missing value for pad velocity curve Keylab 88 : Snap button as KBD memory - memory number default value is wrong V 1.3.0 - KeyStep New Features KeyStep added to the list of devices KeyLab88 : velocity curves Fixes BeatStep pro : Crash when editing step Importing device settings, impossible to find the file to import User template(s) missing 's' Button configuration no more available Limit zoom out in piano roll and drum roll V 1.2.2 New Features BeatStep pro : Add Wait To Load Pattern function Fixes BeatStep pro : wrong global settings at opening BeatStep pro : Wrong param id Seq2 Hz/V 1V MIDI Note BeatStep pro : New factory preset (MIDI&USB, Wait to load ON, Pas to Midi Channel USER) BeatStep pro : "Device not connected" pop up when BSP not connected V 1.2.1 Fixes BeatStep pro : Remove Sync feature on BSP Update FW recalling update popup BeatStep pro : set drum map range to [0,127] BeatStep pro : inversion Seq1 Gate et Seq 2 Pitch KeyLab 88 : update (transpose, bank MSB for pads, sustain pedal threshold) Minimal Required version popup : 1.1.0.4 for KL88, 1.1.2.0 for BSP V 1.2.0 - BeatStepPro New Features Auto-Update MCC Automatic download of latest firmware HW Test interface BeatStepPro support : piano roll support bulks partial transfert of parameters from computer to device device global parameters V 1.1.0 - BeatStep New Features BeatStep support. Edit your sequences and user scales directly in the MIDI Control Center. V 1.0.1 Fixes Mac 10.9 and Windows 8: Some devices were not properly seen as connected or the communication failed. If you experienced this bug on Mac 10.9, you might have to open Audio MIDI Setup and remove the MIDI Devices that had this problem.
Win 7+	Midi Control Center	03-Feb-2017	19.1 Mb	1.6.1.14	MIDI Control Center V 1.6.1 New Features Drumbrute : added Roller/Looper section Improvements Improve tooltip message when Sync not available Failed to open device : a better workflow/popup is now provided Fixes Drumbrute : "All" has been removed from global midi channel V 1.6.0 New Features MatrixBrute added to the list of devices Fixes Updated Minilab MK2 firmware for offline update V 1.5.1 Fixes MIDI Control Center properly handles firmware updates when the computer is offline V 1.5.0 - Minilab-mkII New Features Minilab MkII added to the list of devices Fixes After a firmware update, MCC displays properly device settings No more crashes if drumbrute is disconnected while transferring data V 1.4.0 - DrumBrute New Features DrumBrute added to the list of devices Fixes Improved memory handling for MiniLab - Sync or Working Memory manipulations created issues Updated BeatStep firmware for offline update Devices are now not editable when in firmware update mode It is now possible to read the connected device's firmware version after an update of the MCC V 1.3.2 Fixes Beatstep : wrong embedded FW V 1.3.1 New Features Keystep : add courbe "soft" for aftertouch issue Keystep : set popup to update fw if version smaller Keystep : update fw reboot message Fixes Auto-Update : Updater tool is missing mouseUp/mouseDrag bad handled on Mac BeatStep Pro : update FW indicator issue Keylab 88 : missing value for pad velocity curve Keylab 88 : Snap button as KBD memory - memory number default value is wrong V 1.3.0 - KeyStep New Features KeyStep added to the list of devices KeyLab88 : velocity curves Fixes BeatStep pro : Crash when editing step Importing device settings, impossible to find the file to import User template(s) missing 's' Button configuration no more available Limit zoom out in piano roll and drum roll V 1.2.2 New Features BeatStep pro : Add Wait To Load Pattern function Fixes BeatStep pro : wrong global settings at opening BeatStep pro : Wrong param id Seq2 Hz/V 1V MIDI Note BeatStep pro : New factory preset (MIDI&USB, Wait to load ON, Pas to Midi Channel USER) BeatStep pro : "Device not connected" pop up when BSP not connected V 1.2.1 Fixes BeatStep pro : Remove Sync feature on BSP Update FW recalling update popup BeatStep pro : set drum map range to [0,127] BeatStep pro : inversion Seq1 Gate et Seq 2 Pitch KeyLab 88 : update (transpose, bank MSB for pads, sustain pedal threshold) Minimal Required version popup : 1.1.0.4 for KL88, 1.1.2.0 for BSP V 1.2.0 - BeatStepPro New Features Auto-Update MCC Automatic download of latest firmware HW Test interface BeatStepPro support : piano roll support bulks partial transfert of parameters from computer to device device global parameters V 1.1.0 - BeatStep New Features BeatStep support. Edit your sequences and user scales directly in the MIDI Control Center. V 1.0.1 Fixes Mac 10.9 and Windows 8: Some devices were not properly seen as connected or the communication failed. If you experienced this bug on Mac 10.9, you might have to open Audio MIDI Setup and remove the MIDI Devices that had this problem.
10.8+	Midi Control Center	03-Feb-2017	37.6 Mb	1.6.1.14	MIDI Control Center V 1.6.1 New Features Drumbrute : added Roller/Looper section Improvements Improve tooltip message when Sync not available Failed to open device : a better workflow/popup is now provided Fixes Drumbrute : "All" has been removed from global midi channel V 1.6.0 New Features MatrixBrute added to the list of devices Fixes Updated Minilab MK2 firmware for offline update V 1.5.1 Fixes MIDI Control Center properly handles firmware updates when the computer is offline V 1.5.0 - Minilab-mkII New Features Minilab MkII added to the list of devices Fixes After a firmware update, MCC displays properly device settings No more crashes if drumbrute is disconnected while transferring data V 1.4.0 - DrumBrute New Features DrumBrute added to the list of devices Fixes Improved memory handling for MiniLab - Sync or Working Memory manipulations created issues Updated BeatStep firmware for offline update Devices are now not editable when in firmware update mode It is now possible to read the connected device's firmware version after an update of the MCC V 1.3.2 Fixes Beatstep : wrong embedded FW V 1.3.1 New Features Keystep : add courbe "soft" for aftertouch issue Keystep : set popup to update fw if version smaller Keystep : update fw reboot message Fixes Auto-Update : Updater tool is missing mouseUp/mouseDrag bad handled on Mac BeatStep Pro : update FW indicator issue Keylab 88 : missing value for pad velocity curve Keylab 88 : Snap button as KBD memory - memory number default value is wrong V 1.3.0 - KeyStep New Features KeyStep added to the list of devices KeyLab88 : velocity curves Fixes BeatStep pro : Crash when editing step Importing device settings, impossible to find the file to import User template(s) missing 's' Button configuration no more available Limit zoom out in piano roll and drum roll V 1.2.2 New Features BeatStep pro : Add Wait To Load Pattern function Fixes BeatStep pro : wrong global settings at opening BeatStep pro : Wrong param id Seq2 Hz/V 1V MIDI Note BeatStep pro : New factory preset (MIDI&USB, Wait to load ON, Pas to Midi Channel USER) BeatStep pro : "Device not connected" pop up when BSP not connected V 1.2.1 Fixes BeatStep pro : Remove Sync feature on BSP Update FW recalling update popup BeatStep pro : set drum map range to [0,127] BeatStep pro : inversion Seq1 Gate et Seq 2 Pitch KeyLab 88 : update (transpose, bank MSB for pads, sustain pedal threshold) Minimal Required version popup : 1.1.0.4 for KL88, 1.1.2.0 for BSP V 1.2.0 - BeatStepPro New Features Auto-Update MCC Automatic download of latest firmware HW Test interface BeatStepPro support : piano roll support bulks partial transfert of parameters from computer to device device global parameters V 1.1.0 - BeatStep New Features BeatStep support. Edit your sequences and user scales directly in the MIDI Control Center. V 1.0.1 Fixes Mac 10.9 and Windows 8: Some devices were not properly seen as connected or the communication failed. If you experienced this bug on Mac 10.9, you might have to open Audio MIDI Setup and remove the MIDI Devices that had this problem.
10.8+	Midi Control Center	21-Dec-2016	37.6 Mb	1.6.0.921	MIDI Control Center V 1.6.0 New Features MatrixBrute added to the list of devices Fixes Updated Minilab MK2 firmware for offline update V 1.5.1 Fixes MIDI Control Center properly handles firmware updates when the computer is offline V 1.5.0 - Minilab-mkII New Features Minilab MkII added to the list of devices Fixes After a firmware update, MCC displays properly device settings No more crashes if drumbrute is disconnected while transferring data V 1.4.0 - DrumBrute New Features DrumBrute added to the list of devices Fixes Improved memory handling for MiniLab - Sync or Working Memory manipulations created issues Updated BeatStep firmware for offline update Devices are now not editable when in firmware update mode It is now possible to read the connected device's firmware version after an update of the MCC V 1.3.2 Fixes Beatstep : wrong embedded FW V 1.3.1 New Features Keystep : add courbe "soft" for aftertouch issue Keystep : set popup to update fw if version smaller Keystep : update fw reboot message Fixes Auto-Update : Updater tool is missing mouseUp/mouseDrag bad handled on Mac BeatStep Pro : update FW indicator issue Keylab 88 : missing value for pad velocity curve Keylab 88 : Snap button as KBD memory - memory number default value is wrong V 1.3.0 - KeyStep New Features KeyStep added to the list of devices KeyLab88 : velocity curves Fixes BeatStep pro : Crash when editing step Importing device settings, impossible to find the file to import User template(s) missing 's' Button configuration no more available Limit zoom out in piano roll and drum roll V 1.2.2 New Features BeatStep pro : Add Wait To Load Pattern function Fixes BeatStep pro : wrong global settings at opening BeatStep pro : Wrong param id Seq2 Hz/V 1V MIDI Note BeatStep pro : New factory preset (MIDI&USB, Wait to load ON, Pas to Midi Channel USER) BeatStep pro : "Device not connected" pop up when BSP not connected V 1.2.1 Fixes BeatStep pro : Remove Sync feature on BSP Update FW recalling update popup BeatStep pro : set drum map range to [0,127] BeatStep pro : inversion Seq1 Gate et Seq 2 Pitch KeyLab 88 : update (transpose, bank MSB for pads, sustain pedal threshold) Minimal Required version popup : 1.1.0.4 for KL88, 1.1.2.0 for BSP V 1.2.0 - BeatStepPro New Features Auto-Update MCC Automatic download of latest firmware HW Test interface BeatStepPro support : piano roll support bulks partial transfert of parameters from computer to device device global parameters V 1.1.0 - BeatStep New Features BeatStep support. Edit your sequences and user scales directly in the MIDI Control Center. V 1.0.1 Fixes Mac 10.9 and Windows 8: Some devices were not properly seen as connected or the communication failed. If you experienced this bug on Mac 10.9, you might have to open Audio MIDI Setup and remove the MIDI Devices that had this problem.
Win 7+	Midi Control Center	21-Dec-2016	19.2 Mb	1.6.0.921	MIDI Control Center V 1.6.0 New Features MatrixBrute added to the list of devices Fixes Updated Minilab MK2 firmware for offline update V 1.5.1 Fixes MIDI Control Center properly handles firmware updates when the computer is offline V 1.5.0 - Minilab-mkII New Features Minilab MkII added to the list of devices Fixes After a firmware update, MCC displays properly device settings No more crashes if drumbrute is disconnected while transferring data V 1.4.0 - DrumBrute New Features DrumBrute added to the list of devices Fixes Improved memory handling for MiniLab - Sync or Working Memory manipulations created issues Updated BeatStep firmware for offline update Devices are now not editable when in firmware update mode It is now possible to read the connected device's firmware version after an update of the MCC V 1.3.2 Fixes Beatstep : wrong embedded FW V 1.3.1 New Features Keystep : add courbe "soft" for aftertouch issue Keystep : set popup to update fw if version smaller Keystep : update fw reboot message Fixes Auto-Update : Updater tool is missing mouseUp/mouseDrag bad handled on Mac BeatStep Pro : update FW indicator issue Keylab 88 : missing value for pad velocity curve Keylab 88 : Snap button as KBD memory - memory number default value is wrong V 1.3.0 - KeyStep New Features KeyStep added to the list of devices KeyLab88 : velocity curves Fixes BeatStep pro : Crash when editing step Importing device settings, impossible to find the file to import User template(s) missing 's' Button configuration no more available Limit zoom out in piano roll and drum roll V 1.2.2 New Features BeatStep pro : Add Wait To Load Pattern function Fixes BeatStep pro : wrong global settings at opening BeatStep pro : Wrong param id Seq2 Hz/V 1V MIDI Note BeatStep pro : New factory preset (MIDI&USB, Wait to load ON, Pas to Midi Channel USER) BeatStep pro : "Device not connected" pop up when BSP not connected V 1.2.1 Fixes BeatStep pro : Remove Sync feature on BSP Update FW recalling update popup BeatStep pro : set drum map range to [0,127] BeatStep pro : inversion Seq1 Gate et Seq 2 Pitch KeyLab 88 : update (transpose, bank MSB for pads, sustain pedal threshold) Minimal Required version popup : 1.1.0.4 for KL88, 1.1.2.0 for BSP V 1.2.0 - BeatStepPro New Features Auto-Update MCC Automatic download of latest firmware HW Test interface BeatStepPro support : piano roll support bulks partial transfert of parameters from computer to device device global parameters V 1.1.0 - BeatStep New Features BeatStep support. Edit your sequences and user scales directly in the MIDI Control Center. V 1.0.1 Fixes Mac 10.9 and Windows 8: Some devices were not properly seen as connected or the communication failed. If you experienced this bug on Mac 10.9, you might have to open Audio MIDI Setup and remove the MIDI Devices that had this problem.
10.8+	Midi Control Center	22-Nov-2016	37 Mb	1.5.1.882	MIDI Control Center V 1.5.1 MIDI Control Center properly handles firmware updates when the computer is offline V 1.5.0 - Minilab-mkII New Features Minilab MkII added to the list of devices Fixes After a firmware update, MCC displays properly device settings No more crashes if drumbrute is disconnected while transferring data V 1.4.0 - DrumBrute New Features DrumBrute added to the list of devices Fixes Improved memory handling for MiniLab - Sync or Working Memory manipulations created issues Updated BeatStep firmware for offline update Devices are now not editable when in firmware update mode It is now possible to read the connected device's firmware version after an update of the MCC V 1.3.2 Fixes Beatstep : wrong embedded FW V 1.3.1 New Features Keystep : add courbe "soft" for aftertouch issue Keystep : set popup to update fw if version smaller Keystep : update fw reboot message Fixes Auto-Update : Updater tool is missing mouseUp/mouseDrag bad handled on Mac BeatStep Pro : update FW indicator issue Keylab 88 : missing value for pad velocity curve Keylab 88 : Snap button as KBD memory - memory number default value is wrong V 1.3.0 - KeyStep New Features KeyStep added to the list of devices KeyLab88 : velocity curves Fixes BeatStep pro : Crash when editing step Importing device settings, impossible to find the file to import User template(s) missing 's' Button configuration no more available Limit zoom out in piano roll and drum roll V 1.2.2 New Features BeatStep pro : Add Wait To Load Pattern function Fixes BeatStep pro : wrong global settings at opening BeatStep pro : Wrong param id Seq2 Hz/V 1V MIDI Note BeatStep pro : New factory preset (MIDI&USB, Wait to load ON, Pas to Midi Channel USER) BeatStep pro : "Device not connected" pop up when BSP not connected V 1.2.1 Fixes BeatStep pro : Remove Sync feature on BSP Update FW recalling update popup BeatStep pro : set drum map range to [0,127] BeatStep pro : inversion Seq1 Gate et Seq 2 Pitch KeyLab 88 : update (transpose, bank MSB for pads, sustain pedal threshold) Minimal Required version popup : 1.1.0.4 for KL88, 1.1.2.0 for BSP V 1.2.0 - BeatStepPro New Features Auto-Update MCC Automatic download of latest firmware HW Test interface BeatStepPro support : piano roll support bulks partial transfert of parameters from computer to device device global parameters V 1.1.0 - BeatStep New Features BeatStep support. Edit your sequences and user scales directly in the MIDI Control Center. V 1.0.1 Fixes Mac 10.9 and Windows 8: Some devices were not properly seen as connected or the communication failed. If you experienced this bug on Mac 10.9, you might have to open Audio MIDI Setup and remove the MIDI Devices that had this problem.
Win 7+	Midi Control Center	22-Nov-2016	18.7 Mb	1.5.1.882	MIDI Control Center V 1.5.1 MIDI Control Center properly handles firmware updates when the computer is offline V 1.5.0 - Minilab-mkII New Features Minilab MkII added to the list of devices Fixes After a firmware update, MCC displays properly device settings No more crashes if drumbrute is disconnected while transferring data V 1.4.0 - DrumBrute New Features DrumBrute added to the list of devices Fixes Improved memory handling for MiniLab - Sync or Working Memory manipulations created issues Updated BeatStep firmware for offline update Devices are now not editable when in firmware update mode It is now possible to read the connected device's firmware version after an update of the MCC V 1.3.2 Fixes Beatstep : wrong embedded FW V 1.3.1 New Features Keystep : add courbe "soft" for aftertouch issue Keystep : set popup to update fw if version smaller Keystep : update fw reboot message Fixes Auto-Update : Updater tool is missing mouseUp/mouseDrag bad handled on Mac BeatStep Pro : update FW indicator issue Keylab 88 : missing value for pad velocity curve Keylab 88 : Snap button as KBD memory - memory number default value is wrong V 1.3.0 - KeyStep New Features KeyStep added to the list of devices KeyLab88 : velocity curves Fixes BeatStep pro : Crash when editing step Importing device settings, impossible to find the file to import User template(s) missing 's' Button configuration no more available Limit zoom out in piano roll and drum roll V 1.2.2 New Features BeatStep pro : Add Wait To Load Pattern function Fixes BeatStep pro : wrong global settings at opening BeatStep pro : Wrong param id Seq2 Hz/V 1V MIDI Note BeatStep pro : New factory preset (MIDI&USB, Wait to load ON, Pas to Midi Channel USER) BeatStep pro : "Device not connected" pop up when BSP not connected V 1.2.1 Fixes BeatStep pro : Remove Sync feature on BSP Update FW recalling update popup BeatStep pro : set drum map range to [0,127] BeatStep pro : inversion Seq1 Gate et Seq 2 Pitch KeyLab 88 : update (transpose, bank MSB for pads, sustain pedal threshold) Minimal Required version popup : 1.1.0.4 for KL88, 1.1.2.0 for BSP V 1.2.0 - BeatStepPro New Features Auto-Update MCC Automatic download of latest firmware HW Test interface BeatStepPro support : piano roll support bulks partial transfert of parameters from computer to device device global parameters V 1.1.0 - BeatStep New Features BeatStep support. Edit your sequences and user scales directly in the MIDI Control Center. V 1.0.1 Fixes Mac 10.9 and Windows 8: Some devices were not properly seen as connected or the communication failed. If you experienced this bug on Mac 10.9, you might have to open Audio MIDI Setup and remove the MIDI Devices that had this problem.
10.8+	Midi Control Center	15-Nov-2016	37 Mb	1.5.0.868	MIDI Control Center Release Note V1.5.0 - Minilab-mkII New Features Minilab MkII added to the list of devices Fixes : After a firmware update, MCC displays properly device settings No more crashes if drumbrute is disconnected while transferring data V1.4.0 - DrumBrute New Features DrumBrute added to the list of devices Fixes: Improved memory handling for MiniLab - Sync or Working Memory manipulations created issues Updated BeatStep firmware for offline update Devices are now not editable when in firmware update mode It is now possible to read the connected device's firmware version after an update of the MCC V1.3.2 Fixes: Beatstep : wrong embedded FW V1.3.1 New Features: Keystep : add courbe "soft" for aftertouch issue Keystep : set popup to update fw if version smaller Keystep : update fw reboot message Fixes: Auto-Update : Updater tool is missing mouseUp/mouseDrag bad handled on Mac BeatStep Pro : update FW indicator issue Keylab 88 : missing value for pad velocity curve Keylab 88 : Snap button as KBD memory - memory number default value is wrong V1.3.0 - KeyStep New Features: KeyStep added to the list of devices KeyLab88 : velocity curves Fixes: BeatStep pro : Crash when editing step Importing device settings, impossible to find the file to import User template(s) missing 's' Button configuration no more available Limit zoom out in piano roll and drum roll V1.2.2 New Features: BeatStep pro : Add Wait To Load Pattern function Fixes: BeatStep pro : wrong global settings at opening BeatStep pro : Wrong param id Seq2 Hz/V 1V MIDI Note BeatStep pro : New factory preset (MIDI&USB, Wait to load ON, Pas to Midi Channel USER) BeatStep pro : "Device not connected" pop up when BSP not connected V1.2.1 Fixes: BeatStep pro : Remove Sync feature on BSP Update FW recalling update popup BeatStep pro : set drum map range to [0,127] BeatStep pro : inversion Seq1 Gate et Seq 2 Pitch KeyLab 88 : update (transpose, bank MSB for pads, sustain pedal threshold) Minimal Required version popup : 1.1.0.4 for KL88, 1.1.2.0 for BSP V1.2.0 - BeatStepPro New Features: Auto-Update MCC Automatic download of latest firmware HW Test interface BeatStepPro support : piano roll support bulks partial transfert of parameters from computer to device device global parameters V1.1.0 - BeatStep New Features: BeatStep support. Edit your sequences and user scales directly in the MIDI Control Center. V1.0.1 Fixes: Mac 10.9 and Windows 8: Some devices were not properly seen as connected or the communication failed. If you experienced this bug on Mac 10.9, you might have to open Audio MIDI Setup and remove the MIDI Devices that had this problem.
Win 7+	Midi Control Center	15-Nov-2016	18.8 Mb	1.5.0.868	MIDI Control Center Release Note V1.5.0 - Minilab-mkII New Features Minilab MkII added to the list of devices Fixes : After a firmware update, MCC displays properly device settings No more crashes if drumbrute is disconnected while transferring data V1.4.0 - DrumBrute New Features DrumBrute added to the list of devices Fixes: Improved memory handling for MiniLab - Sync or Working Memory manipulations created issues Updated BeatStep firmware for offline update Devices are now not editable when in firmware update mode It is now possible to read the connected device's firmware version after an update of the MCC V1.3.2 Fixes: Beatstep : wrong embedded FW V1.3.1 New Features: Keystep : add courbe "soft" for aftertouch issue Keystep : set popup to update fw if version smaller Keystep : update fw reboot message Fixes: Auto-Update : Updater tool is missing mouseUp/mouseDrag bad handled on Mac BeatStep Pro : update FW indicator issue Keylab 88 : missing value for pad velocity curve Keylab 88 : Snap button as KBD memory - memory number default value is wrong V1.3.0 - KeyStep New Features: KeyStep added to the list of devices KeyLab88 : velocity curves Fixes: BeatStep pro : Crash when editing step Importing device settings, impossible to find the file to import User template(s) missing 's' Button configuration no more available Limit zoom out in piano roll and drum roll V1.2.2 New Features: BeatStep pro : Add Wait To Load Pattern function Fixes: BeatStep pro : wrong global settings at opening BeatStep pro : Wrong param id Seq2 Hz/V 1V MIDI Note BeatStep pro : New factory preset (MIDI&USB, Wait to load ON, Pas to Midi Channel USER) BeatStep pro : "Device not connected" pop up when BSP not connected V1.2.1 Fixes: BeatStep pro : Remove Sync feature on BSP Update FW recalling update popup BeatStep pro : set drum map range to [0,127] BeatStep pro : inversion Seq1 Gate et Seq 2 Pitch KeyLab 88 : update (transpose, bank MSB for pads, sustain pedal threshold) Minimal Required version popup : 1.1.0.4 for KL88, 1.1.2.0 for BSP V1.2.0 - BeatStepPro New Features: Auto-Update MCC Automatic download of latest firmware HW Test interface BeatStepPro support : piano roll support bulks partial transfert of parameters from computer to device device global parameters V1.1.0 - BeatStep New Features: BeatStep support. Edit your sequences and user scales directly in the MIDI Control Center. V1.0.1 Fixes: Mac 10.9 and Windows 8: Some devices were not properly seen as connected or the communication failed. If you experienced this bug on Mac 10.9, you might have to open Audio MIDI Setup and remove the MIDI Devices that had this problem.
Win 7+	Midi Control Center	30-Sep-2016	18 Mb	1.4.0.790	ChangeLog MIDI Control Center 1.4.0 Fixes: Improved memory handling for MiniLab - Sync or Working Memory manipulations created issues DrumBrute added to the list of devices Updated BeatStep firmware for offline update Devices are now not editable when in firmware update mode It is now possible to read the connected device's firmware version after an update of the MCC ChangeLog MIDI Control Center 1.3.2 Fixes: 128455 : Beatstep : wrong embedded FW
10.8+	Midi Control Center	30-Sep-2016	36.2 Mb	1.4.0.790	ChangeLog MIDI Control Center 1.4.0 Fixes: Improved memory handling for MiniLab - Sync or Working Memory manipulations created issues DrumBrute added to the list of devices Updated BeatStep firmware for offline update Devices are now not editable when in firmware update mode It is now possible to read the connected device's firmware version after an update of the MCC ChangeLog MIDI Control Center 1.3.2 Fixes: 128455 : Beatstep : wrong embedded FW
10.8+	Midi Control Center	20-Jul-2016	31.7 Mb	1.3.2.673	ChangeLog MIDI Control Center V 1.3.2 Fixes: Beatstep : Firmware update now selects the right firmware version
Win 7+	Midi Control Center	20-Jul-2016	16.1 Mb	1.3.2.673	ChangeLog MIDI Control Center V 1.3.2 Fixes: Beatstep : Firmware update now selects the right firmware version
Win 7+	Midi Control Center	30-Jun-2016	16.3 Mb	1.3.1.667	MIDI Control Center Changelog V 1.3.1 New Features For Keystep add "soft" curve selection for aftertouch response Bugfixes Mouse drag is now properly handled on OSX Available firmware update information is now properly displayed For KeyLab 88, "Constant 127" Pad velocity curve is now available
10.8+	Midi Control Center	30-Jun-2016	31.7 Mb	1.3.1.667	MIDI Control Center Changelog V 1.3.1 New Features For Keystep add "soft" curve selection for aftertouch response Bugfixes Mouse drag is now properly handled on OSX Available firmware update information is now properly displayed For KeyLab 88, "Constant 127" Pad velocity curve is now available
Win 7+	Midi Control Center	30-Mar-2016	15.7 Mb	1.3.0.562	MIDI Control Center release notes V 1.3.0 New Features KeyStep integration The user can edit custom velocity curves for KeyLab 88 Improved readability on global settings Fixed Bugs No more crash while editing a sequence step with BeatStep Pro No more error message while updating the firmware Other minor fixes on UI
10.8+	Midi Control Center	30-Mar-2016	25.9 Mb	1.3.0.562	MIDI Control Center release notes V 1.3.0 New Features KeyStep integration The user can edit custom velocity curves for KeyLab 88 Improved readability on global settings Fixed Bugs No more crash while editing a sequence step with BeatStep Pro No more error message while updating the firmware Other minor fixes on UI
10.7+	MIDI Control Center Unified	20-Nov-2015	20.1 Mb	1.2.2.429	ChangeLog MIDI Control Center V 1.2.2 build 429 Features: BSP : Add Wait To Load Pattern function Fixes: [BSP] No more wrong global settings at opening [BSP] Correction on wrong Parameter Id Seq2 Hz/V 1V MIDI Note [BSP] New factory preset (MIDI&USB, Wait to load ON, Pas to Midi Channel USER) [BSP] Pop up ìDevice not connectedî is suppressed when BSP is not connected
Win 7+	MIDI Control Center Unified	20-Nov-2015	10.9 Mb	1.2.2.429	ChangeLog MIDI Control Center V 1.2.2 build 429 Features: BSP : Add Wait To Load Pattern function Fixes: [BSP] No more wrong global settings at opening [BSP] Correction on wrong Parameter Id Seq2 Hz/V 1V MIDI Note [BSP] New factory preset (MIDI&USB, Wait to load ON, Pas to Midi Channel USER) [BSP] Pop up ìDevice not connectedî is suppressed when BSP is not connected
10.7+	MIDI Control Center Unified	23-Sep-2015	20.1 Mb	1.2.1	ChangeLog MIDI Control Center 1.2.1 Improvements: BeatStep Pro Sync function was replaced by drag and drop between device memories and local templates. Drag and drop Controller Map, Sequences, Drum Sequences separately from local templates to BeatStep Pro. Set drum map range to [0,127] for BeatStep Pro New features from KeyLab 88 version 1.1 are accessible Bug Fixes: BeatStep Pro Sequencer 1 Gate type and Sequencer 2 CV type were inverted
Win 7+	MIDI Control Center Unified	23-Sep-2015	10.9 Mb	1.2.1	ChangeLog MIDI Control Center 1.2.1 Improvements: BeatStep Pro Sync function was replaced by drag and drop between device memories and local templates. Drag and drop Controller Map, Sequences, Drum Sequences separately from local templates to BeatStep Pro. Set drum map range to [0,127] for BeatStep Pro New features from KeyLab 88 version 1.1 are accessible Bug Fixes: BeatStep Pro Sequencer 1 Gate type and Sequencer 2 CV type were inverted
10.7+	MIDI Control Center Unified	19-Mar-2014	12.4 Mb	1.1	Changelog MIDI Control Center 1.1.0 Features: BeatStep Pro support. Edit your sequences and user scales directly in the MIDI Control Center.
Win 7+	MIDI Control Center Unified	19-Mar-2014	9.3 Mb	1.1	Changelog MIDI Control Center 1.1.0 Features: BeatStep Pro support. Edit your sequences and user scales directly in the MIDI Control Center.
10.7+	MIDI Control Center Unified	21-Jan-2014	10.4 Mb	1.0	MIDI Control Center 1.0 rc1 Features: The firmware revision of you device is now displayed directly under the Device name. Clicking on it will open the Firmware Upgrade window (equivalent to going in the menu Device>Firmware Upgrade...) Fixes: Fixed a bug where the Save button would stay disabled after changing a slider value Importing a template would sometimes change the selection in the Templates list. This is no longer the case. There is now a confirmation when deleting a template. Moreover, you can now press the 'Delete' key to quickly delete a template. Changelog MIDI Control Center 1.0 beta Compatibility. This version supports Mac OSX 10.7 and higher, and Windows 7 and Windows 8. Features: The KeyLab's firmware update is now possible. Firmware files are available on the website. SparkLE and Spark can be updated as well. The firmware files will be available on the website at release. Misc: In the Default Keylab template, the transport buttons now send MMC messages (to reflect an upcoming firmware update) Changelog MIDI Control Center 0.9.1 Compatibility. This version supports Mac OSX 10.7 and higher, and Windows 7 and Windows 8. Features: Firmware upgrade is now possible for the MiniLab owners. You can access it from the Device menu. You will need to download the firmware files from the MiniLab resource page on the Arturia website. The Factory controller has a new global parameter, Knob Mode, allowing to switch between Absolute and Relative. Fixes: A window positionning problem when launching the application is fixed. Some labels are corrected.
Win 7+	MIDI Control Center Unified	21-Jan-2014	7.5 Mb	1.0	MIDI Control Center 1.0 rc1 Features: The firmware revision of you device is now displayed directly under the Device name. Clicking on it will open the Firmware Upgrade window (equivalent to going in the menu Device>Firmware Upgrade...) Fixes: Fixed a bug where the Save button would stay disabled after changing a slider value Importing a template would sometimes change the selection in the Templates list. This is no longer the case. There is now a confirmation when deleting a template. Moreover, you can now press the 'Delete' key to quickly delete a template. Changelog MIDI Control Center 1.0 beta Compatibility. This version supports Mac OSX 10.7 and higher, and Windows 7 and Windows 8. Features: The KeyLab's firmware update is now possible. Firmware files are available on the website. SparkLE and Spark can be updated as well. The firmware files will be available on the website at release. Misc: In the Default Keylab template, the transport buttons now send MMC messages (to reflect an upcoming firmware update) Changelog MIDI Control Center 0.9.1 Compatibility. This version supports Mac OSX 10.7 and higher, and Windows 7 and Windows 8. Features: Firmware upgrade is now possible for the MiniLab owners. You can access it from the Device menu. You will need to download the firmware files from the MiniLab resource page on the Arturia website. The Factory controller has a new global parameter, Knob Mode, allowing to switch between Absolute and Relative. Fixes: A window positionning problem when launching the application is fixed. Some labels are corrected.
10.7+	MIDI Control Center Unified	21-Jan-2014	11 Mb	1.0.1	Changelog MIDI Control Center 1.0.1 Fixes: Mac 10.9 and Windows 8: Some devices were not properly seen as connected or the communication failed. If you experienced this bug on Mac 10.9, you might have to open Audio MIDI Setup and remove the MIDI Devices that had this problem.
Win 7+	MIDI Control Center Unified	21-Jan-2014	7.9 Mb	1.0.1	Changelog MIDI Control Center 1.0.1 Fixes: Mac 10.9 and Windows 8: Some devices were not properly seen as connected or the communication failed. If you experienced this bug on Mac 10.9, you might have to open Audio MIDI Setup and remove the MIDI Devices that had this problem.
10.7+	MIDI Control Center Unified	01-Jul-2015	20 Mb	1.2.0.301	MIDI Control Center 1.2.0.301 - 2015-07-01 New features Full support of BeatStep Pro (firmware version V1.1.0.3)
Win 7+	MIDI Control Center Unified	01-Jul-2015	10.9 Mb	1.2.0.301	MIDI Control Center 1.2.0.301 - 2015-07-01 New features Full support of BeatStep Pro (firmware version V1.1.0.3)

MANUALS

	Manual	Date	Size	Version	Infos	Download
	New Midi Control Center	21-Jun-2017	1.8 Mb	1.0

MicroBrute

Looks Tiny, Sounds Massive

Downloads & manuals

MicroBrute

V 1.0.4.114

New features

Bug fixes

MIDI Control Center

V 1.7.0

New Features

Fixes

V 1.6.2

New Features

Fixes

V 1.6.1

New Features

Improvements

Fixes

V 1.6.0

New Features

Fixes

V 1.5.1

Fixes

V 1.5.0 - Minilab-mkII

New Features

Fixes

V 1.4.0 - DrumBrute

New Features

Fixes

V 1.3.2

Fixes

V 1.3.1

New Features

Fixes

V 1.3.0 - KeyStep

New Features

Fixes

V 1.2.2

New Features

Fixes

V 1.2.1

Fixes

V 1.2.0 - BeatStepPro

New Features

V 1.1.0 - BeatStep

New Features

V 1.0.1

Fixes

MIDI Control Center

V 1.7.0

New Features

Fixes

V 1.6.2

New Features

Fixes

V 1.6.1

New Features

Improvements

Fixes

V 1.6.0

New Features

Fixes

V 1.5.1

Fixes

V 1.5.0 - Minilab-mkII

New Features

Fixes

V 1.4.0 - DrumBrute

New Features

Fixes

V 1.3.2

Fixes

V 1.3.1

New Features

Fixes

V 1.3.0 - KeyStep

New Features

Fixes

V 1.2.2

New Features