Arturia Software Center

V 1.1.8

Bugfix

• Long time Synchronization fix
• Activation fix for Minilab Black Edition and Analog Laboratory bundles.

Arturia Software Center

V 1.1.8

Bugfix

• Long time Synchronization fix
• Activation fix for Minilab Black Edition and Analog Laboratory bundles.

Changelog MIDI Control Center 1.1.0

Features:
* BeatStep support. Edit your sequences and user scales directly in the MIDI Control Center.

Changelog MIDI Control Center 1.1.0

Features:
* BeatStep support. Edit your sequences and user scales directly in the MIDI Control Center.

Changelog MIDI Control Center 1.1.0

Features:
* BeatStep support. Edit your sequences and user scales directly in the MIDI Control Center.

Changelog MIDI Control Center 1.1.0

Features:
* BeatStep support. Edit your sequences and user scales directly in the MIDI Control Center.

Changelog MIDI Control Center 1.1.0

Features:
* BeatStep support. Edit your sequences and user scales directly in the MIDI Control Center.

Changelog MIDI Control Center 1.1.0

Features:
* BeatStep support. Edit your sequences and user scales directly in the MIDI Control Center.

Changelog MIDI Control Center 1.1.0

Features:
* BeatStep support. Edit your sequences and user scales directly in the MIDI Control Center.

Changelog MIDI Control Center 1.1.0

Features:
* BeatStep support. Edit your sequences and user scales directly in the MIDI Control Center.

Analog Lab 2.0.2

Improvements

• Favorites are now directly accessible from the preset browser result list
• Windows installer now remembers the VST installation path across all the V Collection instruments
• Various graphical improvements (presets browser, playlist, favorites, macros)
• Various stability and compatibility improvements on DAWS

Bugfixes

• No more preset loss that would show an empty preset browser when launching the plugin

Analog Lab 2.0.2

Improvements

• Favorites are now directly accessible from the preset browser result list
• Windows installer now remembers the VST installation path across all the V Collection instruments
• Various graphical improvements (presets browser, playlist, favorites, macros)
• Various stability and compatibility improvements on DAWS

Bugfixes

• No more preset loss that would show an empty preset browser when launching the plugin

V 1.2.4

Bugfixes

• Knob mode preference not recalled properly (case 123481)
• Crash on close Logic Pro (case 121103)
• Crash when validating AU or when opening the plugin on 10.10 and 10.9 (case 122628)

V 1.2.3

Improvement:

• Allow browsing multi when a sound is loaded and vice versa
• When loading a sound, the first part of the multi is initialized with it and the second part is set to none

Bugfixes

• Crash on PT when set plugin as inactive or track "make inactive" (case 120039)
• Crash on PT when moving plugin from an insert slot to another (case 120155)
• Crash when switch sound/multi fast (case 118948)
• Vox state recall = no sound (case 119450)
• Huge CPU spike switching preset and automation running (case 117387)
• Midi automation not recorded when bounce or export on Audio Unit (case 118746)
• Stuck note when browsing presets (case 119093)
• No Sustain goes to prophet (case 119974)
• Unable to find full plugin if system disk is not named C: (case 120558)
• No more sustain (case 121105)

• ModWheel and Pitch wheel not transmitted and impossible to map any CC (case 121043)

• Vox preset not well recalled (case 121145)

• bugfix case 121126

V 1.2.2

Bugfixes

• Bad database no solina/vox/matrix presets (case 119494)

V 1.2.1

Bugfixes

• Assignable knob edits volume when choosing nothing in selection menu (case 119094)
• Favorites and ratings of factory overwritten by installer (case 119092)
• No sound in Analog Lab after 20 minutes if internal synth is not activated (case 119099)

V 1.2

Features

• Includes sounds from :
  • Matrix-12 V
  • Solina V
  • VOX Continental V

V 1.1

Features

• Live Map Programs accessible through MIDI Program Change and VST Preset List
• Live Map Management Functions: Import, Export and Delete
• Integration of AAX Plug-In
• Load random Sounds in Multi
• New Sound Mode Filters: User, Favorite and Reset
• Enhanced communication with Arturia Controllers o Display Presets and Categories on LCD o Update of Sound and Multi Buttons o Update of Snapshot buttons o Avoid jumping values with knobs o Show ghost sliders (position of hardware controllers with pick up)

Improvement

• Renamed and adjusted levels of Preset Library
• Display a loading message when loading Presets
• No stuck notes when changing split point, transpose or chords
• Edit the Song Name in the Live Map
• Full Plug-Ins always enabled for editing (no more need to enable in Preferences)

V 1.0.5

• Fixed an installer issue on mac os
• Fixed a huge noise caused by the Limiter effect.
• Control values such as Pitch Bend, Mod Wheel, Sustain, Aftertouch and Expression used to not be transmitted to Prophet-5 and Prophet-VS to avoid a sticky notes issue with these synths. Now they are all transmitted but Sustain that causes some sticky note issues.
• Fixed a sound drop occurring when the Master Volume is set to the max from a hardware controller with relative encoders (minilab)
• Fixed an sound drop issue in Sound mode.
• Refactored the processing of browsing event incoming from the controller, should result in a robustness increase.
• Fixed issue with Jupiter-8V Original JP-8 Presets. Upgraded embedded Jupiter-8V from 2.5.4 to 2.5.5
• Fixed issue with level knob, with ALive knob fix active (BugzID: 115646)
• Fixed issue with snapshot buttons update (BugzID: 115658)
• Fixed with repaint of the live program list
• Fixed BugzID 115619, In Sound mode, fixed controls init values.
• Fixed issues with preset browsing from controllers BugzID: 115638
• Fixed issues with sounds in live mode
• Fixed issue occurring when browsing from controllers BugzID: 115633
• Fixed issue occurring when refreshing the preset panel of the live mode
• Fixed issue with loading multis and display multis in Live Mode
• Fixed issue with wurlitzer when loading state on pro tools, now skipping the note initializations
• Fixed crash that may occur when reducing the number of sounds with filters
• Fixed issue with preset browsing
• Fixed value of seq step, polyphony (sound parameters) when saving a project
• Deep refactoring of the preset loading system to improve robustness.
• Fixed issues related to toolbar update vs ability to delete a sound BugzID: 115106, BugzID 115585
• Fixed issue with the Level knob on keylab virtual GUIs, impact ?
• Moved soft clip value from preferences to state so users can retrieve their project in the exact state that they left
• Updated installer with regards to move of resources dir and default state files
• Updated paths where to find oberheim sem v and wurlitzer v
• Upgraded version of internal parameter enum
• moved resources from DeclarativeUI to Labo2, updated installers
• added the possibility to run Analog Lab standalone at the end of installation
• Fixed issues with pitch bend for:
  • Prophet-V
  • ARP2600V
  • CS-80V
  • Jupiter-8V
  • Mini V
• Fixed missing declaration of pad notes for minilab
• Fixed issue with empty chords panel (case 115015)
• Fixed issue with stuck notes with prophet (case 115221)
• Fixed issue with SSE and unaligned buffers at the exit of the audio chain (crash at startup)

V 1.0.4

• Fixed issue with mute audio when demo has expired, whistling when changing mode after load state 
• Fixed issue with drag and drop into live program map
• Fixed issue with preset name after load state and switch mode
• Fixed issue with state loading and restoring (Separated set chunk and get chunk in 2 parameters, fixed issue with assignments not properly restored - new version of parameter enum)
• Fixed issue with MIDI event parsing in standalone
• Pads can be used from KeyLab controllers
• Fixed issue with demo mode (only one instance muting after demo period has expired)
• Fixed names of parameters for pre/post switches in Multi tracks (BugzID 115079)
• Fixed drag and drop of Multis and Sounds onto Live programs 17 to 128 (BugzID 115233)
• Reload Live program when overwriting the current live program (BugzID 115233)
• Fixed issue with clock sync, related to BugzID 115194
• Fixed issue with Vocal filter effect (BugzID 115152)
• Fixed issue with auto scrolling (BugzID 115199)
• Fixed potential issue with controls sent during instrument switch related to BugzID 115221, unfortunately does not fix it.
• Fixed blocked occurrence with state machine when terminating scan with DP8 on windows
• Fixed issue occurring when loading a state on DP8 windows.
• Fixed Sound loading issue: o The state machine used to re-order commands to be executed (preset loading commands) which resulted in bad sounds. I separated FIFOs for load commands in one hand and transition processing in the other hand. I also fixed an issue with the "pending command" that is now cleared when receiving the state kRestarted instead of kMuted
• Fixed muted sound issue (BugzID: 115205)

V 1.0.3

• Fixed issue with Pads playing always the same chord
• Fixed issue with control notification in Pro Tools (case 115156)
• Fixed names of control parameters (pitch bend, after touch, sustain and expression)
• Renamed several multis
• Added message box when deletion of a sound failed, when deleting a sound, the next sound is loaded
• Fixed crash at exit with ableton live 9 and 2 instances of Analog Lab, keeping auval working with Analog Lab
• Restored change that broke state loading
• Activate sql patch (updates installed Multi’s) Fixed issue with state loading (projects) (Mac only) 
• Fixed concurrent access issue when saving a multi in ableton live BugzID: 115099
• Switched Analog Player controls to absolute (Mac only)
• Bodge to prevent from cs80 issues BugzID: 115087
• Removed extra tooltips BugzID: 115090 BugzID: 115091
• Added version number in full plugins section
• Embedded Jupiter-8V 2.5.4, Sound editing enabled with 2.5.4 minimum
• Embedded Oberheim SEM V 1.1.7, Sound editing enabled with 1.1.7 minimum
• Embedded Wurlitzer V 1.0.6, Sound editing enabled with 1.0.6 minimum
• Fixed issue with Pitch Shift Chorus effect
• MIDI Split Editor showing pressed keys
• Fixed installation issue with windows 32-bit BugzID
• Fixed issues with state saving and loading: now reloading the live mode properly, and sound or multis, added support for state previous versions
• Bodge to workaround issue with Oberheim SEM V BugzID: 115064 (Analog Lab mac installer creates a directory /Library/Arturia/Oberheim SEM V to avoid this issue)

V 1.0.2

• Upgraded min versions of obsemv and wurli to deactivate editing
• Updated embedded version of oberheim on windows
• Fixed crash occurring when loading quickly Multis: parameter (such as seq step) was set while the instrument was being removed.
• Modified virtual keyboard so the pressed keys are more visible
• Fixed issue blocking the loading of sound
• Fixed issue with display of live program info after loading state
• Added restore of the user mode i.e. live mode is restored if Analog Lab was saved with live mode, BugzID: 114868

V 1.0.1

Features

• Support for keylab controllers - added processing to not take acceleration into account
• Insert new sound presets
• Updated parameter names

Bugfixes

• Secondary selection updated in all cases
• Fixed issue with save of assignment in sound mode
• “Pad” and “Snapshot” panels misplaced when changing controller layout (case 114979)
• Default parameter assignment should show a disabled parameter instead of volume (case 114996)
• 32- bit Audio Unit validation fail (case 114970)
• Updated keylab descriptions so they work in absolute mode
• Integrated new knobs for keylab controllers
• Fixed issue with capability controller rollover
• Fixed issues with capability parameters, fixed capability parameter mapping on mini v
• Fixed issues with sound perf params
• Fixed issues related to change of type of sound capability parameters
• Load a multi by default
• Added level labels to player, factory laboratory, default controller and keylab 25, 49, 61
• Emphasized the combo background rollover, print properly toggle buttons when disabled
• Displaying a - when disabled in capability controllers
• case 114980 Snapshot label displays extra info
• case 114920 Data filter options lost when opening plug-in GUI
• Pitch wheel handle of MiniLab disappears for value 7C (LSB) 114944 / 7B (MS)
• Live Program Map GUI should have non clickable column 114913 headers (non sortable)

V 1.2.4

Bugfixes

• Knob mode preference not recalled properly (case 123481)
• Crash on close Logic Pro (case 121103)
• Crash when validating AU or when opening the plugin on 10.10 and 10.9 (case 122628)

V 1.2.3

Improvement:

• Allow browsing multi when a sound is loaded and vice versa
• When loading a sound, the first part of the multi is initialized with it and the second part is set to none

Bugfixes

• Crash on PT when set plugin as inactive or track "make inactive" (case 120039)
• Crash on PT when moving plugin from an insert slot to another (case 120155)
• Crash when switch sound/multi fast (case 118948)
• Vox state recall = no sound (case 119450)
• Huge CPU spike switching preset and automation running (case 117387)
• Midi automation not recorded when bounce or export on Audio Unit (case 118746)
• Stuck note when browsing presets (case 119093)
• No Sustain goes to prophet (case 119974)
• Unable to find full plugin if system disk is not named C: (case 120558)
• No more sustain (case 121105)

• ModWheel and Pitch wheel not transmitted and impossible to map any CC (case 121043)

• Vox preset not well recalled (case 121145)

• bugfix case 121126

V 1.2.2

Bugfixes

• Bad database no solina/vox/matrix presets (case 119494)

V 1.2.1

Bugfixes

• Assignable knob edits volume when choosing nothing in selection menu (case 119094)
• Favorites and ratings of factory overwritten by installer (case 119092)
• No sound in Analog Lab after 20 minutes if internal synth is not activated (case 119099)

V 1.2

Features

• Includes sounds from :
  • Matrix-12 V
  • Solina V
  • VOX Continental V

V 1.1

Features

• Live Map Programs accessible through MIDI Program Change and VST Preset List
• Live Map Management Functions: Import, Export and Delete
• Integration of AAX Plug-In
• Load random Sounds in Multi
• New Sound Mode Filters: User, Favorite and Reset
• Enhanced communication with Arturia Controllers o Display Presets and Categories on LCD o Update of Sound and Multi Buttons o Update of Snapshot buttons o Avoid jumping values with knobs o Show ghost sliders (position of hardware controllers with pick up)

Improvement

• Renamed and adjusted levels of Preset Library
• Display a loading message when loading Presets
• No stuck notes when changing split point, transpose or chords
• Edit the Song Name in the Live Map
• Full Plug-Ins always enabled for editing (no more need to enable in Preferences)

V 1.0.5

• Fixed an installer issue on mac os
• Fixed a huge noise caused by the Limiter effect.
• Control values such as Pitch Bend, Mod Wheel, Sustain, Aftertouch and Expression used to not be transmitted to Prophet-5 and Prophet-VS to avoid a sticky notes issue with these synths. Now they are all transmitted but Sustain that causes some sticky note issues.
• Fixed a sound drop occurring when the Master Volume is set to the max from a hardware controller with relative encoders (minilab)
• Fixed an sound drop issue in Sound mode.
• Refactored the processing of browsing event incoming from the controller, should result in a robustness increase.
• Fixed issue with Jupiter-8V Original JP-8 Presets. Upgraded embedded Jupiter-8V from 2.5.4 to 2.5.5
• Fixed issue with level knob, with ALive knob fix active (BugzID: 115646)
• Fixed issue with snapshot buttons update (BugzID: 115658)
• Fixed with repaint of the live program list
• Fixed BugzID 115619, In Sound mode, fixed controls init values.
• Fixed issues with preset browsing from controllers BugzID: 115638
• Fixed issues with sounds in live mode
• Fixed issue occurring when browsing from controllers BugzID: 115633
• Fixed issue occurring when refreshing the preset panel of the live mode
• Fixed issue with loading multis and display multis in Live Mode
• Fixed issue with wurlitzer when loading state on pro tools, now skipping the note initializations
• Fixed crash that may occur when reducing the number of sounds with filters
• Fixed issue with preset browsing
• Fixed value of seq step, polyphony (sound parameters) when saving a project
• Deep refactoring of the preset loading system to improve robustness.
• Fixed issues related to toolbar update vs ability to delete a sound BugzID: 115106, BugzID 115585
• Fixed issue with the Level knob on keylab virtual GUIs, impact ?
• Moved soft clip value from preferences to state so users can retrieve their project in the exact state that they left
• Updated installer with regards to move of resources dir and default state files
• Updated paths where to find oberheim sem v and wurlitzer v
• Upgraded version of internal parameter enum
• moved resources from DeclarativeUI to Labo2, updated installers
• added the possibility to run Analog Lab standalone at the end of installation
• Fixed issues with pitch bend for:
  • Prophet-V
  • ARP2600V
  • CS-80V
  • Jupiter-8V
  • Mini V
• Fixed missing declaration of pad notes for minilab
• Fixed issue with empty chords panel (case 115015)
• Fixed issue with stuck notes with prophet (case 115221)
• Fixed issue with SSE and unaligned buffers at the exit of the audio chain (crash at startup)

V 1.0.4

• Fixed issue with mute audio when demo has expired, whistling when changing mode after load state 
• Fixed issue with drag and drop into live program map
• Fixed issue with preset name after load state and switch mode
• Fixed issue with state loading and restoring (Separated set chunk and get chunk in 2 parameters, fixed issue with assignments not properly restored - new version of parameter enum)
• Fixed issue with MIDI event parsing in standalone
• Pads can be used from KeyLab controllers
• Fixed issue with demo mode (only one instance muting after demo period has expired)
• Fixed names of parameters for pre/post switches in Multi tracks (BugzID 115079)
• Fixed drag and drop of Multis and Sounds onto Live programs 17 to 128 (BugzID 115233)
• Reload Live program when overwriting the current live program (BugzID 115233)
• Fixed issue with clock sync, related to BugzID 115194
• Fixed issue with Vocal filter effect (BugzID 115152)
• Fixed issue with auto scrolling (BugzID 115199)
• Fixed potential issue with controls sent during instrument switch related to BugzID 115221, unfortunately does not fix it.
• Fixed blocked occurrence with state machine when terminating scan with DP8 on windows
• Fixed issue occurring when loading a state on DP8 windows.
• Fixed Sound loading issue: o The state machine used to re-order commands to be executed (preset loading commands) which resulted in bad sounds. I separated FIFOs for load commands in one hand and transition processing in the other hand. I also fixed an issue with the "pending command" that is now cleared when receiving the state kRestarted instead of kMuted
• Fixed muted sound issue (BugzID: 115205)

V 1.0.3

• Fixed issue with Pads playing always the same chord
• Fixed issue with control notification in Pro Tools (case 115156)
• Fixed names of control parameters (pitch bend, after touch, sustain and expression)
• Renamed several multis
• Added message box when deletion of a sound failed, when deleting a sound, the next sound is loaded
• Fixed crash at exit with ableton live 9 and 2 instances of Analog Lab, keeping auval working with Analog Lab
• Restored change that broke state loading
• Activate sql patch (updates installed Multi’s) Fixed issue with state loading (projects) (Mac only) 
• Fixed concurrent access issue when saving a multi in ableton live BugzID: 115099
• Switched Analog Player controls to absolute (Mac only)
• Bodge to prevent from cs80 issues BugzID: 115087
• Removed extra tooltips BugzID: 115090 BugzID: 115091
• Added version number in full plugins section
• Embedded Jupiter-8V 2.5.4, Sound editing enabled with 2.5.4 minimum
• Embedded Oberheim SEM V 1.1.7, Sound editing enabled with 1.1.7 minimum
• Embedded Wurlitzer V 1.0.6, Sound editing enabled with 1.0.6 minimum
• Fixed issue with Pitch Shift Chorus effect
• MIDI Split Editor showing pressed keys
• Fixed installation issue with windows 32-bit BugzID
• Fixed issues with state saving and loading: now reloading the live mode properly, and sound or multis, added support for state previous versions
• Bodge to workaround issue with Oberheim SEM V BugzID: 115064 (Analog Lab mac installer creates a directory /Library/Arturia/Oberheim SEM V to avoid this issue)

V 1.0.2

• Upgraded min versions of obsemv and wurli to deactivate editing
• Updated embedded version of oberheim on windows
• Fixed crash occurring when loading quickly Multis: parameter (such as seq step) was set while the instrument was being removed.
• Modified virtual keyboard so the pressed keys are more visible
• Fixed issue blocking the loading of sound
• Fixed issue with display of live program info after loading state
• Added restore of the user mode i.e. live mode is restored if Analog Lab was saved with live mode, BugzID: 114868

V 1.0.1

Features

• Support for keylab controllers - added processing to not take acceleration into account
• Insert new sound presets
• Updated parameter names

Bugfixes

• Secondary selection updated in all cases
• Fixed issue with save of assignment in sound mode
• “Pad” and “Snapshot” panels misplaced when changing controller layout (case 114979)
• Default parameter assignment should show a disabled parameter instead of volume (case 114996)
• 32- bit Audio Unit validation fail (case 114970)
• Updated keylab descriptions so they work in absolute mode
• Integrated new knobs for keylab controllers
• Fixed issue with capability controller rollover
• Fixed issues with capability parameters, fixed capability parameter mapping on mini v
• Fixed issues with sound perf params
• Fixed issues related to change of type of sound capability parameters
• Load a multi by default
• Added level labels to player, factory laboratory, default controller and keylab 25, 49, 61
• Emphasized the combo background rollover, print properly toggle buttons when disabled
• Displaying a - when disabled in capability controllers
• case 114980 Snapshot label displays extra info
• case 114920 Data filter options lost when opening plug-in GUI
• Pitch wheel handle of MiniLab disappears for value 7C (LSB) 114944 / 7B (MS)
• Live Program Map GUI should have non clickable column 114913 headers (non sortable)

ARP 2600 V 3.0.2

Improvements

• Cables become transparent when hovering them to make visible what is behind them
• Favorites are now directly accessible from the preset browser result list
• Windows installer now remembers the VST installation path across all the VCollection instruments
• Various graphical improvements (presets browser, playlist, favorites)
• Improved NKS Integration
• Various stability and compatibility improvements on DAWs

Bugfixes

• No more audio peaks when switching presets
• GPU handling improved - No more black screens when OpenGL 2.0 is not compatible
• No more preset loss that would show an empty preset browser when launching the plugin

ARP 2600 V 3.0.2

Improvements

• Cables become transparent when hovering them to make visible what is behind them
• Favorites are now directly accessible from the preset browser result list
• Windows installer now remembers the VST installation path across all the VCollection instruments
• Various graphical improvements (presets browser, playlist, favorites)
• Improved NKS Integration
• Various stability and compatibility improvements on DAWs

Bugfixes

• No more audio peaks when switching presets
• GPU handling improved - No more black screens when OpenGL 2.0 is not compatible
• No more preset loss that would show an empty preset browser when launching the plugin

V 2.7.0

New Features

• Added Native Instrument NKS support

Bugfixes

• The standalone version would sometimes crash at startup on Mac OS X 10.11 El Capitan
• There was an issue with window resizing in several DAWs

V 2.6.3

Bugfixes

• Minor GUI fixes

V 2.6.2

Bugfixes

• Trig/Gate switch of the sequencer doesn't work correctly (case 119746)
• Start/Stop is inverted when switching preset while holding key (case 119862)
• Hanging notes when stopping sequencer (case 94485)
• Poly mode limited to 10 voices (case 118233)
• CC not transmitted with several instances in a DAW (case 118238)
• Notes played legato even when they do not overlap (case 119568)
• Sound not well stopped while changing preset and some notes are pressed (case 119573)

V 2.6.1

Bugfixes

• Multiple simultaneous MIDI devices not working in standalone (case 119046)
• Crash while importing preset banks (case 119075)
• Logic crashes when switching plugin (case 119042)

Known issues

• Crash on close if the authorization popup has not been closed first (case 119027)

V 2.6

Bugfixes

• Crash when using the Curve editor (case 118204)

V 2.7.0

New Features

• Added Native Instrument NKS support

Bugfixes

• The standalone version would sometimes crash at startup on Mac OS X 10.11 El Capitan
• There was an issue with window resizing in several DAWs

V 2.6.3

Bugfixes

• Minor GUI fixes

V 2.6.2

Bugfixes

• Trig/Gate switch of the sequencer doesn't work correctly (case 119746)
• Start/Stop is inverted when switching preset while holding key (case 119862)
• Hanging notes when stopping sequencer (case 94485)
• Poly mode limited to 10 voices (case 118233)
• CC not transmitted with several instances in a DAW (case 118238)
• Notes played legato even when they do not overlap (case 119568)
• Sound not well stopped while changing preset and some notes are pressed (case 119573)

V 2.6.1

Bugfixes

• Multiple simultaneous MIDI devices not working in standalone (case 119046)
• Crash while importing preset banks (case 119075)
• Logic crashes when switching plugin (case 119042)

Known issues

• Crash on close if the authorization popup has not been closed first (case 119027)

V 2.6

Bugfixes

• Crash when using the Curve editor (case 118204)

B-3 V 1.0.4

Bugfixes

• No more crashes in MainStage after a time of use
• No more issues with OpenGL 2.0 computers
• Plugins now handle MIDI properly in all DAWs when the interface is minimized
• Exporting - importing presets can now be done when the folder name contains special characters
• Reloading preset in upper toolbar now properly reloads the preset
• REAPER - State is now correctly saved / recalled
• Keyboard GUI is now properly displayed when playing with the mouse
• MIDI CC automations are smoother when bouncing offline
• Program changes are properly implemented in AU version
• Added "OK" button on bottom of audio device settings
• No more parameter transmitted when the plugin receives a MIDI Stop message
• Communication with Arturia Software Center is now properly handled on Mac OSX
• MIDI mapping is now functional in REAPER 5
• MIDI Sync are now properly transmitted in Standalone

1.0.2

Improvements

• Add a setting to choose Rotary click volume
• Add a setting to set Upper/Lower balance
• Favorites are now directly accessible from the preset browser result list
• Windows installer now remembers the VST installation path across all the VCollection instruments
• Various graphical improvements (presets browser, playlist, favorites)
• Improve NKS Integration
• Various stability and compatibility improvements on DAWS

Bugfixes

• MIDI CC 64 now triggers the sustain of both upper and lower keys
• GPU handling improved - No more black screens when OpenGL 2.0 is not compatible
• No more preset loss that would show an empty preset browser when launching the plugin

V 1.0.0

First release of the B3.

B-3 V 1.0.4

Bugfixes

• No more crashes in MainStage after a time of use
• No more issues with OpenGL 2.0 computers
• Plugins now handle MIDI properly in all DAWs when the interface is minimized
• Exporting - importing presets can now be done when the folder name contains special characters
• Reloading preset in upper toolbar now properly reloads the preset
• REAPER - State is now correctly saved / recalled
• Keyboard GUI is now properly displayed when playing with the mouse
• MIDI CC automations are smoother when bouncing offline
• Program changes are properly implemented in AU version
• Added "OK" button on bottom of audio device settings
• No more parameter transmitted when the plugin receives a MIDI Stop message
• Communication with Arturia Software Center is now properly handled on Mac OSX
• MIDI mapping is now functional in REAPER 5
• MIDI Sync are now properly transmitted in Standalone

1.0.2

Improvements

• Add a setting to choose Rotary click volume
• Add a setting to set Upper/Lower balance
• Favorites are now directly accessible from the preset browser result list
• Windows installer now remembers the VST installation path across all the VCollection instruments
• Various graphical improvements (presets browser, playlist, favorites)
• Improve NKS Integration
• Various stability and compatibility improvements on DAWS

Bugfixes

• MIDI CC 64 now triggers the sustain of both upper and lower keys
• GPU handling improved - No more black screens when OpenGL 2.0 is not compatible
• No more preset loss that would show an empty preset browser when launching the plugin

V 1.0.0

First release of the B3.

BeatStep firmware 1.2.0.3 Release Notes

New features:

• Preset Reset = Press RECALL+STOP. It returns all data except pad calibration to default

• Full Reset = Press RECALL+PLAY. It returns all data including pad calibration to default

Improvements:

• Faster knob acceleration

• Better visualization of MIDI Channel on pad when the sequencer is running

Bug fixes:

• MMC messages are now transmitted via Midi DIN OUT port
• After power-up, Stop and Play retain the previous settings
• No more freeze of MIDI sync when lots of MIDI messages are received

BeatStep firmware 1.1.0.0 Release Notes

New Features

• Provide additional settings locally. There is now a way to set up some parameters directly on the unit while in SEQ mode. Shift + Knob 1: set gate time (50%..99%) Shift + Knob 2: set swing (50%..75%) Shift + Knob 3: set legato mode (off/on/on reset)
• Transpose pads with Controller in CNTRL mode It's now possible to transpose pads in CNTRL mode, using Shift + big knob, on a +/-24 half steps range.
• Extend sequencer big knob transposition range Transposition range (big knob) has been extended from +/-12 to +/-24 half steps

Bug Fixes

• Knob acceleration too slow Knobs are now accelerated properly when turned fast
• Default start up memory should be 1 At power up, sequence from memory #1 is recalled (previously, a default sequence was loaded)
• MIDI channel pad highlight in Controller mode. Pad back-lighting is now restored after channel setting and similar operations
• Stuck note in CV while switching CV channel while playing Changing CV channel while playing a sequence no longer produces stuck CV note
• RPN/NRPN fine mode not working RPN/NRPN fine mode now works as expected when activated with MIDI Control Center
• Big knob value update between CNTRL mode and SEQ mode Setting rate/transpose in SEQ mode no longer affects the volume setting internal position in CNTRL mode
• Bad handling of SPP (Song Position Pointer) message Fixed Song Position Pointer message handling (when EXT SYNC is active), leading to better compatibility with Maschine®
• Inverted MIDI Values for pads/encoders It's now possible to program a pad or knob with min value > max value (useful for pads in switched control mode)

BeatStep firmware 1.2.0.3 Release Notes

New features:

• Preset Reset = Press RECALL+STOP. It returns all data except pad calibration to default

• Full Reset = Press RECALL+PLAY. It returns all data including pad calibration to default

Improvements:

• Faster knob acceleration

• Better visualization of MIDI Channel on pad when the sequencer is running

Bug fixes:

• MMC messages are now transmitted via Midi DIN OUT port
• After power-up, Stop and Play retain the previous settings
• No more freeze of MIDI sync when lots of MIDI messages are received

BeatStep firmware 1.1.0.0 Release Notes

New Features

• Provide additional settings locally. There is now a way to set up some parameters directly on the unit while in SEQ mode. Shift + Knob 1: set gate time (50%..99%) Shift + Knob 2: set swing (50%..75%) Shift + Knob 3: set legato mode (off/on/on reset)
• Transpose pads with Controller in CNTRL mode It's now possible to transpose pads in CNTRL mode, using Shift + big knob, on a +/-24 half steps range.
• Extend sequencer big knob transposition range Transposition range (big knob) has been extended from +/-12 to +/-24 half steps

Bug Fixes

• Knob acceleration too slow Knobs are now accelerated properly when turned fast
• Default start up memory should be 1 At power up, sequence from memory #1 is recalled (previously, a default sequence was loaded)
• MIDI channel pad highlight in Controller mode. Pad back-lighting is now restored after channel setting and similar operations
• Stuck note in CV while switching CV channel while playing Changing CV channel while playing a sequence no longer produces stuck CV note
• RPN/NRPN fine mode not working RPN/NRPN fine mode now works as expected when activated with MIDI Control Center
• Big knob value update between CNTRL mode and SEQ mode Setting rate/transpose in SEQ mode no longer affects the volume setting internal position in CNTRL mode
• Bad handling of SPP (Song Position Pointer) message Fixed Song Position Pointer message handling (when EXT SYNC is active), leading to better compatibility with Maschine®
• Inverted MIDI Values for pads/encoders It's now possible to program a pad or knob with min value > max value (useful for pads in switched control mode)

BeatStep firmware 1.2.0.3 Release Notes

New features:

• Preset Reset = Press RECALL+STOP. It returns all data except pad calibration to default

• Full Reset = Press RECALL+PLAY. It returns all data including pad calibration to default

Improvements:

• Faster knob acceleration

• Better visualization of MIDI Channel on pad when the sequencer is running

Bug fixes:

• MMC messages are now transmitted via Midi DIN OUT port
• After power-up, Stop and Play retain the previous settings
• No more freeze of MIDI sync when lots of MIDI messages are received

BeatStep firmware 1.1.0.0 Release Notes

New Features

• Provide additional settings locally. There is now a way to set up some parameters directly on the unit while in SEQ mode. Shift + Knob 1: set gate time (50%..99%) Shift + Knob 2: set swing (50%..75%) Shift + Knob 3: set legato mode (off/on/on reset)
• Transpose pads with Controller in CNTRL mode It's now possible to transpose pads in CNTRL mode, using Shift + big knob, on a +/-24 half steps range.
• Extend sequencer big knob transposition range Transposition range (big knob) has been extended from +/-12 to +/-24 half steps

Bug Fixes

• Knob acceleration too slow Knobs are now accelerated properly when turned fast
• Default start up memory should be 1 At power up, sequence from memory #1 is recalled (previously, a default sequence was loaded)
• MIDI channel pad highlight in Controller mode. Pad back-lighting is now restored after channel setting and similar operations
• Stuck note in CV while switching CV channel while playing Changing CV channel while playing a sequence no longer produces stuck CV note
• RPN/NRPN fine mode not working RPN/NRPN fine mode now works as expected when activated with MIDI Control Center
• Big knob value update between CNTRL mode and SEQ mode Setting rate/transpose in SEQ mode no longer affects the volume setting internal position in CNTRL mode
• Bad handling of SPP (Song Position Pointer) message Fixed Song Position Pointer message handling (when EXT SYNC is active), leading to better compatibility with Maschine®
• Inverted MIDI Values for pads/encoders It's now possible to program a pad or knob with min value > max value (useful for pads in switched control mode)

Beatstep Pro FW - 1.4.0.20 - 2016-02-12

New Features

• See tied/slide notes - Hold SHIFT button
• No more tempo display fluctuations in external sync
• Factory reset - Hold PRST LNK + << + >> + LST STEP at power up

Fixed Bugs

• No more real-time recording step mistakes
• No more synchronization issues when external MIDI, DIN or analog clock is used.
• MIDI drivers enhancement solving sync and stuck note issues
• No more chaining Pattern + Alternate playback direction synchronization loss
• Sequence starts on the right step after pattern/project change
• Pattern Chain : First pattern is played properly
• Song Position Pointer is now handled properly

CS-80 V 3.0.2

Improvements

• 3 position switches are now easier to operate with
• Favorites are now directly accessible from the preset browser result list
• Windows installer now remembers the VST installation path across all the VCollection instruments
• Various graphical improvements (presets browser, playlist, favorites)
• Improve NKS Integration
• Various stability and compatibility improvements on DAWS

Bugfixes

• No more audio peaks when switching presets
• GPU handling improved - No more black screens when OpenGL 2.0 is not compatible
• No more preset loss that would show an empty preset browser when launching the plugin

CS-80 V 3.0.2

Improvements

• 3 position switches are now easier to operate with
• Favorites are now directly accessible from the preset browser result list
• Windows installer now remembers the VST installation path across all the VCollection instruments
• Various graphical improvements (presets browser, playlist, favorites)
• Improve NKS Integration
• Various stability and compatibility improvements on DAWS

Bugfixes

• No more audio peaks when switching presets
• GPU handling improved - No more black screens when OpenGL 2.0 is not compatible
• No more preset loss that would show an empty preset browser when launching the plugin

V 2.7.0

New Features

• Added Native Instrument NKS support

Bugfixes

• The standalone version would sometimes crash at startup on Mac OS X 10.11 El Capitan

V 2.6.3

Bugfixes

• Minor GUI fixes

V 2.6.2

Bugfixes

• Impossible to select only Ring Mod on a Voice (case 118784)
• RingMod AD Envelope is tied to the Porta button of voice control (case 119748)
• Slot 5 to 10 of Mod Matrix not working after cover close and reopen (case 119749)
• CC not transmitted with several instances in a DAW (case 119625)

V 2.6.1

Bugfixes

• Multiple simultaneous MIDI devices not working in standalone (case 119046)
• Crash while importing preset banks (case 119075)
• Logic crashes when switching plugin (case 119042)

Known issues

• Crash on close if the authorization popup has not been closed first (case 119027)

V 2.6

Bugfixes

• Voice configuration not correctly loaded (case 118213)
• Knob mode relative circular not working (case 117805)
• Copy a single parameters not recalled (case 118107)
• Copy / paste voices instead of singles (case 118212)

V 2.7.0

New Features

• Added Native Instrument NKS support

Bugfixes

• The standalone version would sometimes crash at startup on Mac OS X 10.11 El Capitan

V 2.6.3

Bugfixes

• Minor GUI fixes

V 2.6.2

Bugfixes

• Impossible to select only Ring Mod on a Voice (case 118784)
• RingMod AD Envelope is tied to the Porta button of voice control (case 119748)
• Slot 5 to 10 of Mod Matrix not working after cover close and reopen (case 119749)
• CC not transmitted with several instances in a DAW (case 119625)

V 2.6.1

Bugfixes

• Multiple simultaneous MIDI devices not working in standalone (case 119046)
• Crash while importing preset banks (case 119075)
• Logic crashes when switching plugin (case 119042)

Known issues

• Crash on close if the authorization popup has not been closed first (case 119027)

V 2.6

Bugfixes

• Voice configuration not correctly loaded (case 118213)
• Knob mode relative circular not working (case 117805)
• Copy a single parameters not recalled (case 118107)
• Copy / paste voices instead of singles (case 118212)

Farfisa V1.0.4.1034

Improvements

• NKS mapping improvements

Bugfixes

• Polyphonic aftertouch messages now properly handled
• No more crashes in MainStage after a time of use
• CC64 Sustain pedal is now properly mapped
• No more issues with OpenGL 2.0 computers
• Plugins now handle MIDI properly in all DAWs when the interface is minimized
• Exporting - importing presets can now be done when the folder name contains special characters
• Reloading preset in upper toolbar now properly reloads the preset
• REAPER - State is now correctly saved / recalled
• Keyboard GUI is now properly displayed when playing with the mouse
• MIDI CC automations are smoother when bouncing offline
• Program changes are properly implemented in AU version
• Added "OK" button on bottom of audio device settings
• No more parameter transmitted when the plugin receives a MIDI Stop message
• Communication with Arturia Software Center is now properly handled on Mac OSX
• MIDI mapping is now functional in REAPER 5
• MIDI Sync are now properly transmitted in Standalone

V 1.0.2

Improvements

• Favorites are now directly accessible from the preset browser result list
• Windows installer now remembers the VST installation path across all the VCollection instruments
• No more audio artefact in Flanger when delay and depth are edited while playing
• Various graphical improvements (presets browser, playlist, favorites)
• Various stability and compatibility improvements on DAWS

Bugfixes

• GPU handling improved - No more black screens when OpenGL 2.0 is not compatible
• No more preset loss that would show an empty preset browser when launching the plugin

V 1.0.0

First release of the Farfisa.

Farfisa V1.0.4.1034

Improvements

• NKS mapping improvements

Bugfixes

• Polyphonic aftertouch messages now properly handled
• No more crashes in MainStage after a time of use
• CC64 Sustain pedal is now properly mapped
• No more issues with OpenGL 2.0 computers
• Plugins now handle MIDI properly in all DAWs when the interface is minimized
• Exporting - importing presets can now be done when the folder name contains special characters
• Reloading preset in upper toolbar now properly reloads the preset
• REAPER - State is now correctly saved / recalled
• Keyboard GUI is now properly displayed when playing with the mouse
• MIDI CC automations are smoother when bouncing offline
• Program changes are properly implemented in AU version
• Added "OK" button on bottom of audio device settings
• No more parameter transmitted when the plugin receives a MIDI Stop message
• Communication with Arturia Software Center is now properly handled on Mac OSX
• MIDI mapping is now functional in REAPER 5
• MIDI Sync are now properly transmitted in Standalone

V 1.0.2

Improvements

• Favorites are now directly accessible from the preset browser result list
• Windows installer now remembers the VST installation path across all the VCollection instruments
• No more audio artefact in Flanger when delay and depth are edited while playing
• Various graphical improvements (presets browser, playlist, favorites)
• Various stability and compatibility improvements on DAWS

Bugfixes

• GPU handling improved - No more black screens when OpenGL 2.0 is not compatible
• No more preset loss that would show an empty preset browser when launching the plugin

V 1.0.0

First release of the Farfisa.

iMini 1.1 new features

• This new version adds Audiobus support, background audio, MIDI enhancements as well as bug fixes.
• Visit the iMini web pages to learn more about those improvements.

Jup-8 V 3.0.2

Improvements

• Windows installer now remembers the VST installation path across all the VCollection instruments
• Favorites are now directly accessible from the preset browser result list
• Various graphical improvements (presets browser, playlist, favorites)
• Various stability and compatibility improvements on DAWS

Bugfixes

• No more preset loss that would show an empty preset browser when launching the plugin

Jup-8 V 3.0.2

Improvements

• Windows installer now remembers the VST installation path across all the VCollection instruments
• Favorites are now directly accessible from the preset browser result list
• Various graphical improvements (presets browser, playlist, favorites)
• Various stability and compatibility improvements on DAWS

Bugfixes

• No more preset loss that would show an empty preset browser when launching the plugin

V 2.7.0

New Features

• Added Native Instrument NKS support

v2.6.3

Bugfixes

• No sound in Analog Lab after 20 minutes (case 121148)

v2.6.2

Bugfixes

• Preset not recalled as expected with several instances in PT (case 120665)
• Big cracks when Osc2 is in SAW and osc sync enabled and Osc2 freq is modulated at the same time (case 118410)
• Split point not correctly recalled (case 120061)
• Mode filter not working on "split" (case 116949)
• tooltip BUGS (case 116953)
• EQ disappear (case 120060)
• Slider can be dragged on shaddow (119745)
• Sequencer upper part start/stop "overwrite" lower part (case 119994)
• Seq Midi Start/Stop not working after a Save (case 119964)
• Jupiter 8 V sequencer not running after saving (case 115448)

v2.6.1

Bugfixes

• No sound in Analog Lab after 20 minutes if internal synth is not activated (case 119099)

v2.6

Bugfixes

• Parameters not recalled on PT (case 118230)
• Learn mode doesn't work properly with lower part (case 110836)
• Impossible to modulate some effect parameters with Chorus flanger (case 117591)
• Sequencer Random Mode only on few steps on PC (case 116948)
• stuck note with ARP lower part when switching mode from Dual to Split (case 105935)
• Preset button #8 doesn't get lit (case 105396)
• No more sound after playing a while (case 116679)
• runs out of polyphony (case 106153)
• Portamento issue (case 117578)
• No more blinking LFO led (case 116657)
• No more square wave shape on VCO1 (case 116656)
• Audio engine overload with param EQ (case 117596)
• Impossible to map Aftertouch as modulation source for the Param EQ (case 117594)
• Impossible to modulate Q in Param EQ (case 117593)
• Impossible to map Q + audio engine dead ! (case 117836)

V 2.7.0

New Features

• Added Native Instrument NKS support

v2.6.3

Bugfixes

• No sound in Analog Lab after 20 minutes (case 121148)

v2.6.2

Bugfixes

• Preset not recalled as expected with several instances in PT (case 120665)
• Big cracks when Osc2 is in SAW and osc sync enabled and Osc2 freq is modulated at the same time (case 118410)
• Split point not correctly recalled (case 120061)
• Mode filter not working on "split" (case 116949)
• tooltip BUGS (case 116953)
• EQ disappear (case 120060)
• Slider can be dragged on shaddow (119745)
• Sequencer upper part start/stop "overwrite" lower part (case 119994)
• Seq Midi Start/Stop not working after a Save (case 119964)
• Jupiter 8 V sequencer not running after saving (case 115448)

v2.6.1

Bugfixes

• No sound in Analog Lab after 20 minutes if internal synth is not activated (case 119099)

v2.6

Bugfixes

• Parameters not recalled on PT (case 118230)
• Learn mode doesn't work properly with lower part (case 110836)
• Impossible to modulate some effect parameters with Chorus flanger (case 117591)
• Sequencer Random Mode only on few steps on PC (case 116948)
• stuck note with ARP lower part when switching mode from Dual to Split (case 105935)
• Preset button #8 doesn't get lit (case 105396)
• No more sound after playing a while (case 116679)
• runs out of polyphony (case 106153)
• Portamento issue (case 117578)
• No more blinking LFO led (case 116657)
• No more square wave shape on VCO1 (case 116656)
• Audio engine overload with param EQ (case 117596)
• Impossible to map Aftertouch as modulation source for the Param EQ (case 117594)
• Impossible to modulate Q in Param EQ (case 117593)
• Impossible to map Q + audio engine dead ! (case 117836)

KeyLab 25 Firmware 1.19 Release Note

Installation

Version number check and upgrade should be done with Unified MIDI Control Center.

New Features

• Compatible with future Analog Lab upgrade (allowing better integration)

Bug Fixes (since 1.16)

• Proper handling of Bank 1/Bank 2 (several fixes).
• Fader may erroneously send two messages on separate MIDI channel for each move (fixed)
• Settings done using MIDI Control Center could affect another control than the one edited ( fixed)
• No messages sent by knob when set in RPN/NRPN mode and control number MSB is equal to control number LSB (fixed).

Known Problems

• Regarding pad backlighting feature, if several note messages are sent close together, some of them may be ignored (and the corresponding pad won’t light up).

KeyLab 25 Firmware 1.19 Release Note

Installation

Version number check and upgrade should be done with Unified MIDI Control Center.

New Features

• Compatible with future Analog Lab upgrade (allowing better integration)

Bug Fixes (since 1.16)

• Proper handling of Bank 1/Bank 2 (several fixes).
• Fader may erroneously send two messages on separate MIDI channel for each move (fixed)
• Settings done using MIDI Control Center could affect another control than the one edited ( fixed)
• No messages sent by knob when set in RPN/NRPN mode and control number MSB is equal to control number LSB (fixed).

Known Problems

• Regarding pad backlighting feature, if several note messages are sent close together, some of them may be ignored (and the corresponding pad won’t light up).

KeyLab 49/61 Firmware 1.33 Release Note

Installation

• Version number check and upgrade should be done with Unified MIDI Control Center.

New Features

• Pad backlighting can be activated using MIDI note messages on channel 10 (if you play back a track recorded using pads, with KeyLab as MIDI destination, pad’s LEDs show what have been played).
• Compatible with future Analog Lab upgrade (allowing better integration)

Bug Fixes (since 1.29)

• Proper handling of Bank 1/Bank 2 (several fixes).
• Fader may erroneously send two messages on separate MIDI channel for each move (fixed)
• Settings done using MIDI Control Center could affect another control than the one edited ( fixed)
• No messages sent by knob when set in RPN/NRPN mode and control number MSB is equal to control number LSB (fixed).

Known Problems

• Regarding pad backlighting feature, if several note messages are sent close together, some of them may be ignored (and the corresponding pad won’t light up).

KeyLab 49/61 Firmware 1.33 Release Note

Installation

• Version number check and upgrade should be done with Unified MIDI Control Center.

New Features

• Pad backlighting can be activated using MIDI note messages on channel 10 (if you play back a track recorded using pads, with KeyLab as MIDI destination, pad’s LEDs show what have been played).
• Compatible with future Analog Lab upgrade (allowing better integration)

Bug Fixes (since 1.29)

• Proper handling of Bank 1/Bank 2 (several fixes).
• Fader may erroneously send two messages on separate MIDI channel for each move (fixed)
• Settings done using MIDI Control Center could affect another control than the one edited ( fixed)
• No messages sent by knob when set in RPN/NRPN mode and control number MSB is equal to control number LSB (fixed).

Known Problems

• Regarding pad backlighting feature, if several note messages are sent close together, some of them may be ignored (and the corresponding pad won’t light up).

KeyLab 49 Black Edition Firmware 1.33 Release Note

Installation

Version number check and upgrade should be done with Unified MIDI Control Center.

New Features

• Pad backlighting can be activated using MIDI note messages on channel 10 (if you play back a

KeyLab 49 Black Edition Firmware 1.33 Release Note

Installation

Version number check and upgrade should be done with Unified MIDI Control Center.

New Features

• Pad backlighting can be activated using MIDI note messages on channel 10 (if you play back a

KeyLab mapping for Vox Continental V

Load this file into the free MIDI Control Center editorand send it to the preset of your choice. Recall this preset when using Vox Contiental V with a KeyLab to get the best musical experience.

KeyLab 49/61 Firmware 1.33 Release Note

Installation

• Version number check and upgrade should be done with Unified MIDI Control Center.

New Features

• Pad backlighting can be activated using MIDI note messages on channel 10 (if you play back a track recorded using pads, with KeyLab as MIDI destination, pad’s LEDs show what have been played).
• Compatible with future Analog Lab upgrade (allowing better integration)

Bug Fixes (since 1.29)

• Proper handling of Bank 1/Bank 2 (several fixes).
• Fader may erroneously send two messages on separate MIDI channel for each move (fixed)
• Settings done using MIDI Control Center could affect another control than the one edited ( fixed)
• No messages sent by knob when set in RPN/NRPN mode and control number MSB is equal to control number LSB (fixed).

Known Problems

• Regarding pad backlighting feature, if several note messages are sent close together, some of them may be ignored (and the corresponding pad won’t light up).

KeyLab 49/61 Firmware 1.33 Release Note

Installation

• Version number check and upgrade should be done with Unified MIDI Control Center.

New Features

• Pad backlighting can be activated using MIDI note messages on channel 10 (if you play back a track recorded using pads, with KeyLab as MIDI destination, pad’s LEDs show what have been played).
• Compatible with future Analog Lab upgrade (allowing better integration)

Bug Fixes (since 1.29)

• Proper handling of Bank 1/Bank 2 (several fixes).
• Fader may erroneously send two messages on separate MIDI channel for each move (fixed)
• Settings done using MIDI Control Center could affect another control than the one edited ( fixed)
• No messages sent by knob when set in RPN/NRPN mode and control number MSB is equal to control number LSB (fixed).

Known Problems

• Regarding pad backlighting feature, if several note messages are sent close together, some of them may be ignored (and the corresponding pad won’t light up).

KeyLab 61 Black Edition Firmware 1.33 Release Note

Installation

Version number check and upgrade should be done with Unified MIDI Control Center.

New Features

• Pad backlighting can be activated using MIDI note messages on channel 10 (if you play back a

KeyLab 61 Black Edition Firmware 1.33 Release Note

Installation

Version number check and upgrade should be done with Unified MIDI Control Center.

New Features

• Pad backlighting can be activated using MIDI note messages on channel 10 (if you play back a

KeyLab mapping for Vox Continental V

Load this file into the free MIDI Control Center editorand send it to the preset of your choice. Recall this preset when using Vox Contiental V with a KeyLab to get the best musical experience.

KeyLab 88 FW - 1.2.0.6 - 2016-05-12

Fixed Bugs

• Triggering issue on pads fixed

KeyLab 88 FW - 1.2.0.5 - 2016-04-12

New Features

• Edit a 5-point velocity curve from the KeyLab 88 or the MIDI Control Center
• All parameters are accessible in the Param Edit mode of the KeyLab 88

Fixed Bugs

• Aux pedal is now editable in menu browsing
• Aux pedal is in Control mode (continuous) instead of Switched Control mode (on/off)
• MMC controls in the MIDI Control Center are not mixed up anymore
• No more stuck notes when recalling a memory while a key is being pressed
• SOUND is lit at start-up instead of MULTI
• No more pads double trigs
• LCD dimming now works with all units

KeyLab 88 FW - 1.2.0.5 - 2016-04-12

New Features

• Edit a 5-point velocity curve from the KeyLab 88 or the MIDI Control Center
• All parameters are accessible in the Param Edit mode of the KeyLab 88

Fixed Bugs

• Aux pedal is now editable in menu browsing
• Aux pedal is in Control mode (continuous) instead of Switched Control mode (on/off)
• MMC controls in the MIDI Control Center are not mixed up anymore
• No more stuck notes when recalling a memory while a key is being pressed
• SOUND is lit at start-up instead of MULTI
• No more pads double trigs
• LCD dimming now works with all units

KeyLab 88 FW - 1.2.0.5 - 2016-04-12

New Features

• Edit a 5-point velocity curve from the KeyLab 88 or the MIDI Control Center
• All parameters are accessible in the Param Edit mode of the KeyLab 88

Fixed Bugs

• Aux pedal is now editable in menu browsing
• Aux pedal is in Control mode (continuous) instead of Switched Control mode (on/off)
• MMC controls in the MIDI Control Center are not mixed up anymore
• No more stuck notes when recalling a memory while a key is being pressed
• SOUND is lit at start-up instead of MULTI
• No more pads double trigs
• LCD dimming now works with all units

Firmware 1.1.0.4

Features:

• Independant transpose for part 1 and part 2
• After a power-up the current memory is the last one recalled before a power-down
• Change the functioning and naming of switched control and continuous control for sustain pedal
  • Continuous (control on LCD) is when a normally open switch pedal is used
  • Switched (Inv control on LCD) is when either a continuous pedal or a normally closed switch pedal is used
• Continuous sustain pedal: possibility to set a detection threshold from Global Edit menu

Bugfixes:

• Split point not moving with transpose anymore
• Less aftertouch from keys
• Merge black and white keys aftertouch - highest value is sent
• MMC on MIDI DIN out
• LCD display readable with a PSU of over 5.5V
• Sustain pedal's display: no more "0000"
• Faders postition detection more stable
• Removed memory 0
• Non-validated parameters' value are not displayed anymore
• Patch change's MSB editable from KL88
• Pad note: correct display
• pitch wheel channel is consistant with the part channel chosen

Firmware 1.1.0.4

Features:

• Independant transpose for part 1 and part 2
• After a power-up the current memory is the last one recalled before a power-down
• Change the functioning and naming of switched control and continuous control for sustain pedal
  • Continuous (control on LCD) is when a normally open switch pedal is used
  • Switched (Inv control on LCD) is when either a continuous pedal or a normally closed switch pedal is used
• Continuous sustain pedal: possibility to set a detection threshold from Global Edit menu

Bugfixes:

• Split point not moving with transpose anymore
• Less aftertouch from keys
• Merge black and white keys aftertouch - highest value is sent
• MMC on MIDI DIN out
• LCD display readable with a PSU of over 5.5V
• Sustain pedal's display: no more "0000"
• Faders postition detection more stable
• Removed memory 0
• Non-validated parameters' value are not displayed anymore
• Patch change's MSB editable from KL88
• Pad note: correct display
• pitch wheel channel is consistant with the part channel chosen